0
 
You must Register and/or Login to save a shopping cart
You have 0 Items in your Cart Sub Total: $ 0.00
Providing Quality Parts to the Land Cruiser Community Since 1983
California Proposition 65 Notice
WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, cadmium and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to www.P65Warnings.ca.gov/passenger-vehicle.
Monthly Specials
FJ55 Door Weatherstrip
Starting at: $ 220.00

Search
<<  Browse Catalog  >>


...Featured Product...

Page 044 Land Cruiser 1968-8/87 Manifolds

<<< >>> 1958-8/87 Manifolds 8/87- 2006 Manifolds Diesel Manifolds
1958-8/87 Manifolds

1958-1967

Click the NUMBERS for part listings
Click on the BLUE HIGHLIGHTED NUMBERS in the line drawings to display a COMPLETE part listing of that part number.

SOR Graphite Manifold Gaskets

SOR has developed a superior Graphite Manifold Gasket for your Land Cruiser engine. We believe that SOR's Graphite Manifold Gasket is the highest quality graphite type gasket you can get for your Land Cruiser. Our exclusive material has metal reinforcement embedded into the graphite matrix to make the material more durable than other manufacturer's graphite gaskets. SOR Graphite Manifold Gaskets are made from a unique thick graphite material that is about 1/8" thick and is designed to be squeezed during installation. This squeeze helps seal manifolds and headers that are not perfectly flat. Resists leaks due to warping. This graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Suggested fastener torque of 20-25 ft lb.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
044-01A-SOR
SOR GRAPHITE MANIFOLD GASKET -
Fits 1958-1967 Siamese port gas engine. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
Club Price with 15% Discount is $ 18.70 Click here for info about joining Club SOR
22.00

1968-1974

Click the NUMBERS for part listings
Click on the BLUE HIGHLIGHTED NUMBERS in the line drawings to display a COMPLETE part listing of that part number.

SOR Graphite Manifold Gaskets

SOR has developed a superior Graphite Manifold Gasket for your Land Cruiser engine. We believe that SOR's Graphite Manifold Gasket is the highest quality graphite type gasket you can get for your Land Cruiser. Our exclusive material has metal reinforcement embedded into the graphite matrix to make the material more durable than other manufacturer's graphite gaskets. SOR Graphite Manifold Gaskets are made from a unique thick graphite material that is about 1/8" thick and is designed to be squeezed during installation. This squeeze helps seal manifolds and headers that are not perfectly flat. Resists leaks due to warping. This graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Suggested fastener torque of 20-25 ft lb.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
044-01B-SOR
SOR GRAPHITE MANIFOLD GASKET -
Fits 1968-1974 F gas engine. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
29.00
044-01BSORBLEM
SOR GRAPHITE MANIFOLD GASKET -
Fits 1968-1974 F gas engine. This a clearance item - These gaskets are sale priced because there is a minor cosmetic flaw at one end of the gasket - SEE PHOTO - This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
15.00
Manifold Gaskets
Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
044-01B
AFTERMARKET MANIFOLD GASKET -
Fits 1968-1974 F gas engine
On Sale - Everyone gets the Discounted Price on this part.
(an Additional Handling Charge of 1.50 is already included in price)
16.50
044-01C
MANIFOLD GASKET -
Fits 1/75-8/87 2F gas engine
On Sale - Everyone gets the Discounted Price on this part.
(an Additional Handling Charge of 1.50 is already included in price)
19.50
SOR Kevlar Header Gasket
Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
324-715
15.75
Graphite Heatriser Gasket
Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
044-08B-SOR
GRAPHITE HEATRISER GASKET -
Fits 1968-1974 F gas engine - Graphite gaskets are made from a unique thick graphite material that is about 1/8" thick and is designed to be squeezed during installation. This squeeze helps seal manifolds that are not perfectly flat. Resists leaks due to warping. This graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfgr suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
12.00
Manifold Stud Kit
Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
044-02B-KIT
MANIFOLD STUD KIT -
1968-1974 F gas enginer - Kit has qty 6 manifold studs, qty 6 manifold nuts, and qty 6 manifold washers.
Club Price with 15% Discount is $ 25.42 Click here for info about joining Club SOR
29.90

1/75-8/76

Click the NUMBERS for part listings
Click on the BLUE HIGHLIGHTED NUMBERS in the line drawings to display a COMPLETE part listing of that part number.

SOR Graphite Manifold Gaskets

SOR has developed a superior Graphite Manifold Gasket for your Land Cruiser engine. We believe that SOR's Graphite Manifold Gasket is the highest quality graphite type gasket you can get for your Land Cruiser. Our exclusive material has metal reinforcement embedded into the graphite matrix to make the material more durable than other manufacturer's graphite gaskets. SOR Graphite Manifold Gaskets are made from a unique thick graphite material that is about 1/8" thick and is designed to be squeezed during installation. This squeeze helps seal manifolds and headers that are not perfectly flat. Resists leaks due to warping. This graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Suggested fastener torque of 20-25 ft lb.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
044-01C-SOR
SOR GRAPHITE MANIFOLD GASKET -
Fits 1/75-8/87 2F gas engine. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
29.00
044-01CSORBLEM
SOR GRAPHITE MANIFOLD GASKET -
Fits 1/75-8/87 2F gas engine. This is a clearance item - These gaskets are sale priced because there is a minor cosmetic flaw at one end of the gasket - SEE PHOTO - This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
15.00
Manifold Gaskets
Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
044-01B
AFTERMARKET MANIFOLD GASKET -
Fits 1968-1974 F gas engine
On Sale - Everyone gets the Discounted Price on this part.
(an Additional Handling Charge of 1.50 is already included in price)
16.50
044-01C
MANIFOLD GASKET -
Fits 1/75-8/87 2F gas engine
On Sale - Everyone gets the Discounted Price on this part.
(an Additional Handling Charge of 1.50 is already included in price)
19.50
SOR Kevlar Header Gasket
Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
324-715
15.75
Graphite Heat Riser Gasket
Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
044-08C-SOR
GRAPHITE HEATRISER GASKET -
Fits 1/75-7/87 - Requires insulator 044-12C for installation. Only one gasket required between insulator and exhaust manifold. Graphite gaskets are made from a unique thick graphite material that is about 1/8" thick and is designed to be squeezed during installation. This squeeze helps seal manifolds that are not perfectly flat. Resists leaks due to warping. This graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfgr suggested fastener torque of 20-25 ft lb.
Club Price with 15% Discount is $ 12.75 Click here for info about joining Club SOR
15.00
Stainless Steel Heat Riser Insulator
(click for large picture)
SOR now offers a replacement stainless steel heat riser for 1/75 to 8/87 intake and exhaust manifold assemblies. This insulator installs between the intake and exhaust manifold. This helps avoid overheating and possible cracking of the intake manifold, a common problem on 2F intake manifolds. This is an important consideration since most of these manifolds are no longer available. Since the insulator for the 1/76 to 7/80 California special is no longer available, we recommend using this insulator. Some heat riser flaps will need minor trimming to fit the Stainless Steel Insulator.
Buy
Quantity
Part Number
Description
Price
*In Stock
044-12C
STAINLESS STEEL HEAT RISER INSULATOR -
Fits 1/75-8/87 2F gas engine manifold assemblies (updated part) NON-USA style - Only one gasket needed
Club Price with 15% Discount is $ 38.21 Click here for info about joining Club SOR
44.95
Manifold Stud Kit
Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
044-02C-KIT
MANIFOLD STUD KIT -
1/75-8/87 2F gas engine - Kit has qty 6 manifold studs, qty 6 manifold nuts, qty 6 manifold washers, and 2 end bolts.
Club Price with 15% Discount is $ 32.30 Click here for info about joining Club SOR
38.00

1/76-1/79 California Model

Click the NUMBERS for part listings
Click on the BLUE HIGHLIGHTED NUMBERS in the line drawings to display a COMPLETE part listing of that part number.

SOR Graphite Manifold Gaskets

SOR has developed a superior Graphite Manifold Gasket for your Land Cruiser engine. We believe that SOR's Graphite Manifold Gasket is the highest quality graphite type gasket you can get for your Land Cruiser. Our exclusive material has metal reinforcement embedded into the graphite matrix to make the material more durable than other manufacturer's graphite gaskets. SOR Graphite Manifold Gaskets are made from a unique thick graphite material that is about 1/8" thick and is designed to be squeezed during installation. This squeeze helps seal manifolds and headers that are not perfectly flat. Resists leaks due to warping. This graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Suggested fastener torque of 20-25 ft lb.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
044-01C-SOR
SOR GRAPHITE MANIFOLD GASKET -
Fits 1/75-8/87 2F gas engine. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
29.00
044-01CSORBLEM
SOR GRAPHITE MANIFOLD GASKET -
Fits 1/75-8/87 2F gas engine. This is a clearance item - These gaskets are sale priced because there is a minor cosmetic flaw at one end of the gasket - SEE PHOTO - This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
15.00
Manifold Gaskets
Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
044-01B
AFTERMARKET MANIFOLD GASKET -
Fits 1968-1974 F gas engine
On Sale - Everyone gets the Discounted Price on this part.
(an Additional Handling Charge of 1.50 is already included in price)
16.50
044-01C
MANIFOLD GASKET -
Fits 1/75-8/87 2F gas engine
On Sale - Everyone gets the Discounted Price on this part.
(an Additional Handling Charge of 1.50 is already included in price)
19.50
SOR Kevlar Header Gasket
Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
324-715
15.75
Graphite Heat Riser Gasket
Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
044-08C-SOR
GRAPHITE HEATRISER GASKET -
Fits 1/75-7/87 - Requires insulator 044-12C for installation. Only one gasket required between insulator and exhaust manifold. Graphite gaskets are made from a unique thick graphite material that is about 1/8" thick and is designed to be squeezed during installation. This squeeze helps seal manifolds that are not perfectly flat. Resists leaks due to warping. This graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfgr suggested fastener torque of 20-25 ft lb.
Club Price with 15% Discount is $ 12.75 Click here for info about joining Club SOR
15.00
Stainless Steel Heat Riser Insulator
(click for large picture)
SOR now offers a replacement stainless steel heat riser for 1/75 to 8/87 intake and exhaust manifold assemblies. This insulator installs between the intake and exhaust manifold. This helps avoid overheating and possible cracking of the intake manifold, a common problem on 2F intake manifolds. This is an important consideration since most of these manifolds are no longer available. Since the insulator for the 1/76 to 7/80 California special is no longer available, we recommend using this insulator. Some heat riser flaps will need minor trimming to fit the Stainless Steel Insulator.
Buy
Quantity
Part Number
Description
Price
*In Stock
044-12C
STAINLESS STEEL HEAT RISER INSULATOR -
Fits 1/75-8/87 2F gas engine manifold assemblies (updated part) NON-USA style - Only one gasket needed
Club Price with 15% Discount is $ 38.21 Click here for info about joining Club SOR
44.95
Manifold Stud Kit
Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
044-02C-KIT
MANIFOLD STUD KIT -
1/75-8/87 2F gas engine - Kit has qty 6 manifold studs, qty 6 manifold nuts, qty 6 manifold washers, and 2 end bolts.
Club Price with 15% Discount is $ 32.30 Click here for info about joining Club SOR
38.00

8/76-8/87

Click the NUMBERS for part listings
Click on the BLUE HIGHLIGHTED NUMBERS in the line drawings to display a COMPLETE part listing of that part number.

SOR Graphite Manifold Gaskets

SOR has developed a superior Graphite Manifold Gasket for your Land Cruiser engine. We believe that SOR's Graphite Manifold Gasket is the highest quality graphite type gasket you can get for your Land Cruiser. Our exclusive material has metal reinforcement embedded into the graphite matrix to make the material more durable than other manufacturer's graphite gaskets. SOR Graphite Manifold Gaskets are made from a unique thick graphite material that is about 1/8" thick and is designed to be squeezed during installation. This squeeze helps seal manifolds and headers that are not perfectly flat. Resists leaks due to warping. This graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Suggested fastener torque of 20-25 ft lb.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
044-01C-SOR
SOR GRAPHITE MANIFOLD GASKET -
Fits 1/75-8/87 2F gas engine. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
29.00
044-01CSORBLEM
SOR GRAPHITE MANIFOLD GASKET -
Fits 1/75-8/87 2F gas engine. This is a clearance item - These gaskets are sale priced because there is a minor cosmetic flaw at one end of the gasket - SEE PHOTO - This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
15.00
Manifold Gaskets
Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
044-01B
AFTERMARKET MANIFOLD GASKET -
Fits 1968-1974 F gas engine
On Sale - Everyone gets the Discounted Price on this part.
(an Additional Handling Charge of 1.50 is already included in price)
16.50
044-01C
MANIFOLD GASKET -
Fits 1/75-8/87 2F gas engine
On Sale - Everyone gets the Discounted Price on this part.
(an Additional Handling Charge of 1.50 is already included in price)
19.50
SOR Kevlar Header Gasket
Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
324-715
15.75
Graphite Heat Riser Gasket
Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
044-08C-SOR
GRAPHITE HEATRISER GASKET -
Fits 1/75-7/87 - Requires insulator 044-12C for installation. Only one gasket required between insulator and exhaust manifold. Graphite gaskets are made from a unique thick graphite material that is about 1/8" thick and is designed to be squeezed during installation. This squeeze helps seal manifolds that are not perfectly flat. Resists leaks due to warping. This graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfgr suggested fastener torque of 20-25 ft lb.
Club Price with 15% Discount is $ 12.75 Click here for info about joining Club SOR
15.00
Stainless Steel Heat Riser Insulator
(click for large picture)
SOR now offers a replacement stainless steel heat riser for 1/75 to 8/87 intake and exhaust manifold assemblies. This insulator installs between the intake and exhaust manifold. This helps avoid overheating and possible cracking of the intake manifold, a common problem on 2F intake manifolds. This is an important consideration since most of these manifolds are no longer available. Since the insulator for the 1/76 to 7/80 California special is no longer available, we recommend using this insulator. Some heat riser flaps will need minor trimming to fit the Stainless Steel Insulator.
Buy
Quantity
Part Number
Description
Price
*In Stock
044-12C
STAINLESS STEEL HEAT RISER INSULATOR -
Fits 1/75-8/87 2F gas engine manifold assemblies (updated part) NON-USA style - Only one gasket needed
Club Price with 15% Discount is $ 38.21 Click here for info about joining Club SOR
44.95
Manifold Stud Kit
Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
044-02C-KIT
MANIFOLD STUD KIT -
1/75-8/87 2F gas engine - Kit has qty 6 manifold studs, qty 6 manifold nuts, qty 6 manifold washers, and 2 end bolts.
Club Price with 15% Discount is $ 32.30 Click here for info about joining Club SOR
38.00
Service Tip: Manifold Gasket Replacement

When replacing the manifold gasket it is recommended that you place a straight edge against the manifolds to see if they are in alignment. Misaligned manifolds need to be resurfaced in order to work properly. You should also use anti-seize on all nuts, bolts & studs upon reassembly. All gaskets associated with the intake & exhaust manifold should go on dry-NO GASKET COMPOUND IS REQUIRED or RECOMMENDED. Check the factory engine manuals for proper torque amounts & sequences.

<< Top of Page >>

Specter Off-Road, Inc.

World's Largest Supplier of Land Cruiser Parts & Accessories. Providing Quality Parts Since 1983
© Copyright 1996 - Specter Off-Road, Inc. All rights reserved. Specter Off-Road, Inc. is not affiliated with Toyota Motor Sales or Toyota Motor Corporation.
TT=00:00:01 1105 54.157.81.13

Contact SOR
Mailing Address: 21600 Nordhoff St. Chatsworth, California 91311 USA
Customer Entrance: 21601 Osborne St. (We're a city block long)
Phone: (818) 882-1238, Fax: (818) 882-7144, Email: sor@sor.com
Hours: Monday-Friday 8:00AM-6PM PST,
Closed Saturday & Sunday