0
 
You must Register and/or Login to save a shopping cart
You have 0 Items in your Cart Sub Total: $ 0.00
Providing Quality Parts to the Land Cruiser Community Since 1983
California Proposition 65 Notice
WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, cadmium and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to www.P65Warnings.ca.gov/passenger-vehicle.
Monthly Specials
FJ40 Kick Vent Gasket
Starting at: $ 3.40

Search
<<  Browse Catalog  >>


...Featured Product...

Page 277 Land Cruiser Grab Bar 60, 62 & 80 Series

<<< >>> 60 & 80 Series Grab Bars
 

60 Series

60 & 62 Series Leather Non-USA Grab Bar
SOR Photo SOR Photo
(click for large picture)

The Leather Non-USA Grab Bar bolts securely to dash board. It provides a convenient secure handle for your passenger. The Glove Box Grip was designed for your 60 Series Land Cruiser by Toyota. This Non-USA part is only available in the United States at Specter Off-Road. Designed to clear the glove box door. Mounting hardware is not included and requires minor drilling. Fits all 60 Series. Available in factory interior gray.

Buy
Quantity
Part Number
Description
(This may not be a complete listing of this part number)
To get a complete part listing, click on a blue highlighted number in a line drawing (if available). Alternatively, enter the numeric portion of the part number listed below in the search box located at the top left corner of this page (numeric portion is the first 5 digits including the dash "XXX-XX"). For detailed instruction, click "? HELP" at the top of the page.
Price
*In Stock
277-72A-B
60 SERIES BROWN NONUSA GRAB BAR -
Fits 8/80-8/87 60 Series - Brown leather pad - Designed to clear glove box - Requires minor drilling - Installation hardware must be ordered seperately see #277-73,74 and 75.
(Discontinued - Not available at this time)
0.00
277-72A-B-U
USED 60 SERIES BROWN NONUSA GRAB BAR -
Fits 8/80-8/87 60 Series - Brown leather pad - Designed to clear glove box - Requires minor drilling - Installation hardware must be ordered seperately see #277-73,74 and 75.
(Not available at this time-Please call for availability)
98.00
277-72A-G
60 SERIES GREY NONUSA GRAB BAR -
Fits 8/80-8/87 60 Series - Grey leather pad - Designed to clear glove box - Requires minor drilling - Installation hardware must be ordered seperately see #277-73,74 and 75.
(Discontinued - Not available at this time)
0.00
277-72A-G-U
USED 60 SERIES GREY NONUSA GRAB BAR -
Fits 8/80-8/87 60 Series - Grey leather pad - Designed to clear glove box - Requires minor drilling - Installation hardware must be ordered seperately see #277-73,74 and 75.
(Not available at this time-Please call for availability)
98.00
277-73
GRAB BAR PAD-
Fits 8/80-1/90 60 & 62 Series between bar & dash-2 required
(Discontinued - Not available at this time)
0.00
277-73-U
USED GRAB BAR PAD-
Fits 8/80-1/90 60 & 62 Series between bar & dash-2 required
(Not available at this time-Please call for availability)
6.00
277-74
GRAB BAR SCREW-
Fits 8/80-1/90 60 & 62 Series-4 required
Club Price with 15% Discount is $ 0.81 Click here for info about joining Club SOR
0.95
277-75
1.65
60 & 62 Series Glove Box Grip
SOR Photo
(click for large picture)

The Glove Box Grip for your 60 or 62 Series Land Cruiser was designed by Toyota to clear the glove box door. The urethane assist grip bolts securely to the dash board. It provides a convenient and secure handle for your passenger. Requires minor drilling to install. Mounting hardware is required. Fits all 60 Series. Available in Factory Interior Brown (B) or Gray (G).

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
277-88-B
60 & 62 SERIES BROWN GLOVE BOX GRIP -
Fits 8/80-1/90 60 & 62 Series - Brown urethane - Designed to clear glove box - Requires minor drilling - Installation hardware NOT included
(Discontinued - Not available at this time)
0.00
277-88-B-U
USED 60 & 62 SERIES BROWN GLOVE BOX GRIP -
Fits 8/80-1/90 60 & 62 Series - Brown urethane - Designed to clear glove box - Requires minor drilling - Installation hardware NOT included
(Not available at this time-Please call for availability)
60.00
277-88-G
60 & 62 SERIES GREY GLOVE BOX GRIP -**Special Order NO Return
Fits 8/80-1/90 60 & 62 Series - Grey urethane - Designed to clear glove box - Requires minor drilling - Installation hardware NOT included
Club Price with 15% Discount is $ 69.83 Click here for info about joining Club SOR
Special Order NO Return
82.15
277-88-G-U
USED 60 & 62 SERIES GREY GLOVE BOX GRIP -
Fits 8/80-1/90 60 & 62 Series - Grey urethane - Designed to clear glove box - Requires minor drilling - Installation hardware NOT included
(Not available at this time-Please call for availability)
60.00
277-90
GLOVE BOX GRIP NUT-
Fits 8/80-1/90 60 & 62 Series-2 required
Club Price with 15% Discount is $ 1.73 Click here for info about joining Club SOR
2.03

80 Series

80 Series Non-USA Grab Bar
SOR Photo
(click for large picture)

The 80 Series Non-USA Grab Bar is another factory Non-USA Toyota option for the 80 Series owners who would like to have a secure grip for the passenger. This urethane grip bolts to dash. Minor drilling is required. May require professional installation. Available in Factory Interior Brown (B) or Gray (G).

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
277-91-G
80 SERIES GREY NONUSA GRAB BAR -
Fits 1/90-1/95 80 Series - Grey urethane - Requires minor drilling - May require professional installation - Installation hardware NOT included
(Discontinued - Not available at this time)
0.00
277-91-G-U
USED 80 SERIES GREY NONUSA GRAB BAR -
Fits 1/90-1/95 80 Series - Grey urethane - Requires minor drilling - May require professional installation - Installation hardware NOT included
(Not available at this time-Please call for availability)
44.00
277-91-B-U
USED 80 SERIES BROWN NONUSA GRAB BAR -
Fits 1/90-1/95 80 Series - Brown urethane - Requires minor drilling - May require professional installation - Installation hardware NOT included
(Not available at this time-Please call for availability)
44.00
<< Top of Page >>

Specter Off-Road, Inc.

World's Largest Supplier of Land Cruiser Parts & Accessories. Providing Quality Parts Since 1983
© Copyright 1996 - Specter Off-Road, Inc. All rights reserved. Specter Off-Road, Inc. is not affiliated with Toyota Motor Sales or Toyota Motor Corporation.
TT=00:00:00 236 54.81.45.122

Contact SOR
Mailing Address: 21600 Nordhoff St. Chatsworth, California 91311 USA
Customer Entrance: 21601 Osborne St. (We're a city block long)
Phone: (818) 882-1238, Fax: (818) 882-7144, Email: sor@sor.com
Hours: Monday-Friday 8:00AM-6PM PST,
Closed Saturday & Sunday