0
 
You must Register and/or Login to save a shopping cart
You have 0 Items in your Cart Sub Total: $ 0.00
Providing Quality Parts to the Land Cruiser Community Since 1983
California Proposition 65 Notice
WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, cadmium and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to www.P65Warnings.ca.gov/passenger-vehicle.
Monthly Specials
FJ55 Instrument Panel
Starting at: $ 155.00

Search
<<  Browse Catalog  >>


...Featured Product...

Page 288 Land Cruiser Aftermarket 60, 62, 70 & 75 Series Shackles

<<< >>> 40, 45 & 55 Series 60, 62, 70 & 75 Series
60, 62, 70 & 75 Series Aftermarket Shackles

Greasable Tri-Shackles

Tri-Shackles

These stock length Tri-Shackles (also called Anti-Inversion Shackles) are case hardened for higher resistance to wear. All surfaces are machined for superior performance. They use stock size bushings, and are greasable. The idea of the Anti-Inversion is to eliminate the risk of shackles locking up to the frame under extreme conditions. This also happens when the spring length is too short. Some aftermarket springs and rearched springs require these shackles. They are cad plated for a higher resistance to rust. Bushings sold separately.

See the chart for shackle dimensions. See page 289 for a listing of bushings or see the chart on page 289 for bushings that fit the shackles found on this page. Bushings are sold individually.

Click for Bushings
& Bushing Chart
Click for Leaf Springs & Lift Kits
Highslide JS
(click for large picture)

Buy
Quantity
Part
Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
Installation
Instructions
288-70K-K
60 & 62 SERIES TRI SHACKLE KIT-
Cad plated finish-Fits 8/80-1/90 FJ60 & FJ62,BJ,HJ,BJ70,75 Series front and rear - 4 piece set - Greasable bolts-Stock bolt diameter-Uses stock size bushings, sold separately see page 289
Club Price with 15% Discount is $ 149.60 Click here for info about joining Club SOR
176.00
288-73C
60, 62 & 75 SERIES FRONT LEFT TRI SHACKLE-
Cad plated finish-Fits 8/80-1/90 FJ60 & FJ62,BJ,HJ,BJ70,75 Series front left-Greasable bolts - Stock bolt diameter - Sold each - Uses stock size bushings, sold separately see page 289
Club Price with 15% Discount is $ 42.50 Click here for info about joining Club SOR
50.00
288-74C
60, 62 & 75 SERIES FRONT RIGHT TRI SHACKLE-
Cad plated finish-Fits 8/80-1/90 FJ60 & FJ62,BJ,HJ,BJ70,75 Series front right-Greasable bolts-Stock bolt diameter - Sold each - Uses stock size bushings, sold separately see page 289
Club Price with 15% Discount is $ 42.50 Click here for info about joining Club SOR
50.00
288-75C
60, 62 & 75 SERIES REAR LEFT TRI SHACKLE-
Cad plated finish-Fits 8/80-1/90 FJ60 & FJ62,BJ,HJ,BJ70,75 Series rear left-Greasable bolts-Stock bolt diameter - Sold each - Uses stock size bushings, sold separately see page 289
Club Price with 15% Discount is $ 42.50 Click here for info about joining Club SOR
50.00
288-76C
60, 62 & 75 SERIES REAR RIGHT TRI SHACKLE-
Cad plated finish-Fits 8/80-1/90 FJ60 & FJ62,BJ,HJ,BJ70,75 Series rear right - Greasable bolts - Stock bolt diameter - Sold each-Uses stock size bushings, sold separately see page 289
Club Price with 15% Discount is $ 42.50 Click here for info about joining Club SOR
50.00
288-78-ZERK
GREASE ZERK -
Replacement grease zerk fitting - Sold each.
On Sale - Everyone gets the Discounted Price on this part.
3.00

Performance Shackles

Greasable Shackle Bolts

For those of you who want to update your Performance or Con-Ferr standard shackle bolts to new Greasable Shackle Bolts. 5/8 inch bolt diameter. Sold in pairs.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
288-89
GREASABLE SHACKLE BOLTS-
Fits 5/8 inch bolts -Sold in pairs. Will NOT fit Tri-Shackles.
Club Price with 15% Discount is $ 16.58 Click here for info about joining Club SOR
19.50
Performance Shackles

Made of 3/8 inch steel bar, 5/8 inch diameter bolts, these heavy duty Performance Shackles are available in two sizes: 1 1/2 inches longer than stock and 2 1/2 inches longer than stock. Cad Plated. Bushings not included, see page 289. Sold in pairs.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
288-84
1 INCH PERFORMANCE SHACKLES-
Fits 8/80-1/90 60 & 62 Series front and rear-5/8 inch bolt diameter - 5 1/2 inches pin to pin. Sold in pairs -Does NOT come with bushings, see page 289 - For greaseable bolts see part #288-89.
Club Price with 15% Discount is $ 76.50 Click here for info about joining Club SOR
90.00
288-80
1 1/2 INCH PERFORMANCE SHACKLES-
Fits 1958-1/90 40, 45, 55, 60 & 62 Series front and rear-5/8 inch bolt diameter - 4 1/4 inches pin to pin. Sold in pairs -Does NOT come with bushings, see page 289 - For greaseable bolts see part #288-89.
Club Price with 15% Discount is $ 69.70 Click here for info about joining Club SOR
82.00
288-81
2 1/2 INCH PERFORMANCE SHACKLES -
Fits 1958-1/90 40, 45, 55, 60 & 62 Series front and rear-5/8 inch bolt diameter - 5 1/4 inches pin to pin. Sold in pairs-2 1/2 inches longer than stock shackles-Does NOT come with bushings, see page 289 -For greaseable bolts see part #288-89.
Club Price with 15% Discount is $ 71.40 Click here for info about joining Club SOR
84.00
288-83
3 INCH PERFORMANCE SHACKLES-
Fits 1958-1/90 40, 45, 55, 60 & 62 Series front and rear-5/8 inch bolt diameter - 6 inches pin to pin. Sold in pairs -Does NOT come with bushings, see page 289 - For greaseable bolts see part #288-89.
Club Price with 15% Discount is $ 113.05 Click here for info about joining Club SOR
133.00

Greasable Shackles, Bolts & Pins

Greasable Shackle Bolts

For those of you who want to update your Performance or Con-Ferr standard shackle bolts to new Greasable Shackle Bolts. 5/8 inch bolt diameter. Sold in pairs.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
288-89
GREASABLE SHACKLE BOLTS-
Fits 5/8 inch bolts -Sold in pairs. Will NOT fit Tri-Shackles.
Club Price with 15% Discount is $ 16.58 Click here for info about joining Club SOR
19.50
Extreme Shackles

Taking your 60 & 62 Series seriously, or seriously taking your 60 & 62 Series off-road? Then these Extreme Heavy Duty Shackles are for you. Constructed of 3/8 inch plate steel, they feature a completely boxed in gusset for added strength and durability. Grade 5 hardened bolts are cross-drilled and grease fittings on the heads allow you to 'grease-up' just before hitting the trail. Even if you aren't a hard core four wheeler, these shackles are perfect to get that extra little lift, and the greasable bolts help soften the ride of your cruiser. Either case, these Extreme Shackles are 1 inch over stock in the rear and 2 inches over stock in the front. Bushings sold separately, see page 289. They are cad plated for a higher resistance to rust. Sold in pairs.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
288-96
1 INCH EXTREME SHACKLES-
Cad plated finish-Fits 60 & 62 Series front and rear-Greasable bolts-11/16 inch (18mm) bolt diameter - 4 15/16 inches pin to pin. Sold in pairs - Does NOT come with bushings, see page 289.
Club Price with 15% Discount is $ 92.65 Click here for info about joining Club SOR
109.00
Greasable Shackles

Update your factory O.E.M. shackles to new Greasable Shackles. These greasable shackles are available in stock length. Uses stock size bushings, see page 289. Sold each.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
102-04K-G
FRONT GREASABLE SHACKLE-
Fits 8/80-8/87 60 Series front-Stock length - Sold each - Uses stock size bushings (sold separately see page 289)
On Sale - Everyone gets the Discounted Price on this part.
15.00
102-04L-G
FRONT GREASABLE SHACKLE-
Fits 8/87-1/90 62 Series front-Stock length - Sold each - Uses stock size bushings (sold separately see page 289)
On Sale - Everyone gets the Discounted Price on this part.
15.00
102-04M-G
REAR GREASABLE SHACKLE-
Fits 8/80-1/90 60 & 62 Series rear-Stock length - Sold each - Uses stock size bushings (sold separately see page 289)
On Sale - Everyone gets the Discounted Price on this part.
20.00
102-04H-F-G
FRONT GREASABLE SHACKLE-
Fits 11/84-8/86 BJ70 front-Stock length - Sold each -Uses stock size bushings (sold separately see page 289)
On Sale - Everyone gets the Discounted Price on this part.
15.00
102-04H-R-G
REAR GREASABLE SHACKLE-
Fits 11/84-1/90 BJ70 rear-Stock length - Sold each - Uses stock size bushings (sold separately see page 289)
On Sale - Everyone gets the Discounted Price on this part.
20.00
102-04N-F-G
FRONT GREASABLE SHACKLE-
Fits 11/84-1/90 FJ75 & HJ75 front - Stock length - Sold each - Uses stock size bushings (sold separately see page 289)
On Sale - Everyone gets the Discounted Price on this part.
15.00
102-04N-R-G
REAR GREASABLE SHACKLE-
Fits 11/84-1/90 FJ75 & HJ75 rear - Stock length - Sold each - Uses stock size bushings (sold separately see page 289)
Club Price with 15% Discount is $ 34.17 Click here for info about joining Club SOR
40.20
102-04O-RG
GREASE SHACKLE-
Fits 1/90-- FZJ/HZJ75 REAR
On Sale - Everyone gets the Discounted Price on this part.
20.57
Greasable Spring Hanger Pins

Cad plated Greasable Shackle Pins allow you to grease the pins through a grease fitting without disassembly. Uses stock size bushings, see page 289. Sold each.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
102-03K-G
FRONT & REAR GREASABLE SPRING HANGER PIN-
Fits 8/80-1/90 60 & 62 Series front & rear - Sold each - Uses stock size bushings (sold separately see page 289)
On Sale - Everyone gets the Discounted Price on this part.
12.00
102-03I-F-G
FRONT GREASABLE SPRING HANGER PIN-
Fits 11/84-1/90 BJ70 front - Sold each - Uses stock size bushings (sold separately see page 289)
On Sale - Everyone gets the Discounted Price on this part.
12.00
288-78-ZERK
GREASE ZERK -
Replacement grease zerk fitting - Sold each.
On Sale - Everyone gets the Discounted Price on this part.
3.00

Shackles by Measurement

See page 289 for a listing of bushings or see the chart on page 289 for bushings for the shackles found on this page.

Enter Quantity & Click Buy Now Purchase
Part #
Shackle
Fits
Length
(Pin To Pin)
Diagram
Width
Diagram
Qty.
Price: $ 96.24
In Stock:
#102-04K
Stock
Shackle
8/80-8/87 FJ60 Front
3"
3 1/4"
Qty.
Price: $ 96.63
In Stock:
#102-04L
Stock
Shackle
8/87-1/90 FJ62 Front
3"
Qty.
Price: $ 171.82
In Stock:
#102-04M
Stock
Shackle
8/80-1/90 FJ60 & FJ62 Rear
3 1/2"
 
Qty.
Price: $ 176.00
In Stock:
#288-70K-K
Tri-Shackle
Kit
8/80 - 1/90 60 & 62 Series Front and Rear
3" Front
3 1/2" Rear

 
Tri-Shackles are installed with the anti-inversion bolt towards the axle and the short side of the triangle is the top. Grease zerks face out. Example shown here is drivers side front.
3 1/4"
Qty.
Price: $ 50.00
In Stock:
#288-73C
Tri-Shackle
8/80 - 1/90 60 & 62 Series Front Left
3"
Qty.
Price: $ 50.00
In Stock:
#288-74C
Tri-Shackle
8/80 - 1/90 60 & 62 Series Front Right
Qty.
Price: $ 50.00
In Stock:
#288-75C
Tri-Shackle
8/80 - 1/90 60 & 62 Series Rear Left
3 1/2"
Qty.
Price: $ 50.00
In Stock:
#288-76C
Tri-Shackle
8/80 - 1/90 60 & 62 Series Rear Right
 
Qty.
Price: $ 90.00
In Stock:
#288-84
1" Performance
Shackle
60 & 62 Series Front & Rear
5 1/4"
3 1/4"
Qty.
Price: $ 82.00
In Stock:
#288-80
1 1/2"
Performance
Shackle
1958-1/90 40, 45, 55, 60
& 62 Series Front & Rear
4 1/4"
3"
Qty.
Price: $ 84.00
In Stock:
#288-81
2 1/2"
Performance
Shackle
1958-1/90 40, 45, 55, 60
& 62 Series Front & Rear
5 1/4"
Qty.
Price: $ 0.00
In Stock:
#288-93
3" Performance Shackle
40, 45 & 55 Series Front & Rear
6"
 
<< Top of Page >>

Specter Off-Road, Inc.

World's Largest Supplier of Land Cruiser Parts & Accessories. Providing Quality Parts Since 1983
© Copyright 1996 - Specter Off-Road, Inc. All rights reserved. Specter Off-Road, Inc. is not affiliated with Toyota Motor Sales or Toyota Motor Corporation.
TT=00:00:00 208 54.225.47.94

Contact SOR
Mailing Address: 21600 Nordhoff St. Chatsworth, California 91311 USA
Customer Entrance: 21601 Osborne St. (We're a city block long)
Phone: (818) 882-1238, Fax: (818) 882-7144, Email: sor@sor.com
Hours: Monday-Friday 8:00AM-6PM PST,
Closed Saturday & Sunday