0
 
You must Register and/or Login to save a shopping cart
You have 0 Items in your Cart Sub Total: $ 0.00
Providing Quality Parts to the Land Cruiser Community Since 1983
California Proposition 65 Notice
WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, cadmium and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to www.P65Warnings.ca.gov/passenger-vehicle.
Monthly Specials
FJ55 Door Weatherstrip
Starting at: $ 220.00

Search
<<  Browse Catalog  >>


...Featured Product...

Page 310 Land Cruiser 40 Series Deluxe Seat Covers & Seat Cushions

<<< >>> 40 Series FJ25 43 Series 45 Series Pickup & Troopy FJ45LV Wagon FJ55 Wagon Cushions & Hardware
40 Series

1962-1971

Upgrade and renew your factory seats to look like new with SOR's Deluxe Vinyl Seat Covers. These restoration quality seat covers are sewn to factory patterns using O.E.M. dimensions.

  • Made of high quality Marine Grade Naugahyde vinyl to match your factory interior.
  • NEW COLOR!
    Highslide JS
    Now Available in Coral Vinyl
  • Sewn with durable nylon thread, top stitched with matching finished welted seams.
  • Manufactured by Specter here in the USA so you know they fit!
  • Available for all years & models, even Non-USA Land Cruisers.
  • Comes with detailed installation instructions.
  • 1958-1978 Models are available in Dark Charcoal Gray Marine vinyl to match you factory interior. Early-1965 seat covers are available in Coral. Also available in Haartz denim material, softtops material.
  • Sold in complete sets for front driver and passenger seats
  • Comes with hogrings and reinforcements. They're not just a value-add for a marketing sake like the other guys offer. They've always been part of the kit.
  • Headrest covers are sold separately.
  • Remember, your upholstery will only be as good as the base you have to work with, most likely your foam is as old as the worn upholstery you are replacing. New foam padding will greatly improve the comfort and support of your ride. SOR's upholstery sets are designed to fit properly with new foam installed so the new seat covers have a snug, tailored fit. If you use your old worn foams the new seat covers may be loose. Anytime you reupholster your seats it's crucial to replace the old worn out foam or especially older models that used the horsehair type padding. New padding is a 'must do', SOR's Upholstery Seat Covers are designed to fit tight with new updated foams. Technology is always moving forward allowing us to offer you a better quality replacement seat foam padding. SOR's Formed Seat Foams are manufactured from Qualex commercial grade high resolution seat foam. Each formed piece is custom designed to fit for your application. Qualex 1 inch top foam, backed with 3/4 inch layer of polyethylene pad pan filler which provides support and keeps the springs in place and not coming thru the upper foam, Qualex outer border that skirts the seat, allow for extra layer of padding and also prevents the springs and wires from cutting thru the sides of your new upholstery. Sold each.
Color Matching Note Please click and read

 
Deluxe Vinyl Seat Covers
Buy
Quantity
Part
Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
Installation
Instructions
310-65C-KIT
CORAL DELUXE SOR FRONT SEAT COVER & FOAM SET -
Fits 1962-1965 FJ40 Series (Original Color) - Also fits 1966-9/71 FJ40 Series - Set includes complete Front Bench Seat upholstery set. 4 piece upholstery set includes drivers back & bottom cover and passenger bench back and bottom cover. Also includes 4 piece foam set. Order new hardware kits #310-9000A separately.
On Sale - Everyone gets the Discounted Price on this part.
550.00
310-70D-KIT
GREY DELUXE SOR FRONT SEAT COVER & FOAM SET -
fits 1962-9/71 40 Series - Set includes complete Front Bench Seat upholstery set. 4 piece upholstery set includes drivers back & bottom cover and passenger bench back and bottom cover. Also includes 4 piece foam set. Order new hardware kits #310-9000A separately.
On Sale - Everyone gets the Discounted Price on this part.
499.00
310-70D
SOR FRONT DELUXE VINYL SEAT COVERS-
Dark Charcoal Grey Marine vinyl-Fits 1962-9/71 FJ40 front bench seats-Contoured to O.E.M. dimensions-Sewn with durable nylon thread, top stitched with matching welted seams-Designed to fit tight with new foams-4 piece set (2 bottom seat covers & 2 back seat covers for the front bench seats)
On Sale - Everyone gets the Discounted Price on this part.
(an Additional Handling Charge of 10.00 is already included in price)
360.00
310-9000A
FRONT BENCH SEAT METAL PANEL HARDWARE KIT -
Fits 1962-1972 FJ40 & FJ45 front bench seat-40 piece set - Does both driver & passenger side rear metal seat panels.
Club Price with 20% Discount is $ 17.60 Click here for info about joining Club SOR
22.00
310-9001A
FRONT BENCH SEAT BOTTOM CUSHION HARDWARE KIT -
Fits 1962-1972 FJ40 - 40 piece set - enough hardware to do both driver & passenger bottom cushions.
Club Price with 20% Discount is $ 17.60 Click here for info about joining Club SOR
22.00
Seat Foam
Highslide JS
(click for large picture)

New foam padding will greatly improve the comfort and support of your ride. SOR's upholstery sets are designed to fit properly with new foam installed so the new seat covers have a snug, tailored fit. If you use your old worn foams the new seat covers may be loose. Anytime you reupholster your seats it's crucial to replace the old worn out foam or especially older models that used the horsehair type padding. New padding is a 'must do', SOR's Upholstery Seat Covers are designed to fit tight with new updated foams. Technology is always moving forward allowing us to offer you a better quality replacement seat foam padding. SOR's Formed Seat Foams are manufactured from Qualex commercial grade high resolution seat foam. Each formed piece is custom designed to fit for your application. Qualex 1 inch top foam, backed with 3/4 inch layer of polyethylene pad pan filler which provides support and keeps the springs in place and not coming thru the upper foam, Qualex outer border that skirts the seat, allow for extra layer of padding and also prevents the springs and wires from cutting thru the sides of your new upholstery. Sold each.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
310-101A
SOR FRONT DRIVER BOTTOM PAD-
Fits 1963-9/71 FJ40 front driver seat bottom-Manufactured from Qualex commercial grade high resolution seat foam-Qualex 1 inch top foam, backed with 3/4 inch layer of polyethylene pad pan filler, and an outer border that skirts the seat-Custom designed to fit your application-Sold each
On Sale - Everyone gets the Discounted Price on this part.
39.00
310-101B
SOR FRONT DRIVER BACK PAD-
Fits 1963-9/71 FJ40 front driver seat back-Manufactured from Qualex commercial grade high resolution seat foam-Qualex 1 inch top foam, backed with 3/4 inch layer of polyethylene pad pan filler, and an outer border that skirts the seat-Custom designed to fit your application-Sold each
On Sale - Everyone gets the Discounted Price on this part.
39.00
310-101C
SOR FRONT PASSENGER BOTTOM PAD-
Fits 1963-9/71 FJ40 front passenger seat bottom-Manufactured from Qualex commercial grade high resolution seat foam-Qualex 1 inch top foam, backed with 3/4 inch layer of polyethylene pad pan filler, and an outer border that skirts the seat-Custom designed to fit your application-Sold each
On Sale - Everyone gets the Discounted Price on this part.
40.00
310-101D
SOR FRONT PASSENGER BACK PAD-
Fits 1963-9/71 FJ40 front passenger seat back-Manufactured from Qualex commercial grade high resolution seat foam-Qualex 1 inch top foam, backed with 3/4 inch layer of polyethylene pad pan filler, and an outer border that skirts the seat-Custom designed to fit your application-Sold each
On Sale - Everyone gets the Discounted Price on this part.
45.00
Installation Hardware
Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
310-9000A
FRONT BENCH SEAT METAL PANEL HARDWARE KIT -
Fits 1962-1972 FJ40 & FJ45 front bench seat-40 piece set - Does both driver & passenger side rear metal seat panels.
Club Price with 20% Discount is $ 17.60 Click here for info about joining Club SOR
22.00
310-9001A
FRONT BENCH SEAT BOTTOM CUSHION HARDWARE KIT -
Fits 1962-1972 FJ40 - 40 piece set - enough hardware to do both driver & passenger bottom cushions.
Club Price with 20% Discount is $ 17.60 Click here for info about joining Club SOR
22.00
310-9003
BAG OF HOG RINGS -
Quantity 80
On Sale - Everyone gets the Discounted Price on this part.
10.95

1971-1972

Upgrade and renew your factory seats to look like new with SOR's Deluxe Vinyl Seat Covers. These restoration quality seat covers are sewn to factory patterns using O.E.M. dimensions.

  • Made of high quality Marine Grade Naugahyde vinyl to match your factory interior.
  • Sewn with durable nylon thread, top stitched with matching finished welted seams.
  • Manufactured by Specter here in the USA so you know they fit!
  • Available for all years & models, even Non-USA Land Cruisers.
  • Comes with detailed installation instructions.
  • 1958-1978 Models are available in Dark Charcoal Gray Marine vinyl to match you factory interior. Also available in Haartz denim material, softtops material.
  • Sold in complete sets for front driver and passenger seats
  • Comes with hogrings and reinforcements. They're not just a value-add for a marketing sake like the other guys offer. They've always been part of the kit.
  • Headrest covers are sold separately.
  • Remember, your upholstery will only be as good as the base you have to work with, most likely your foam is as old as the worn upholstery you are replacing. New foam padding will greatly improve the comfort and support of your ride. SOR's upholstery sets are designed to fit properly with new foam installed so the new seat covers have a snug, tailored fit. If you use your old worn foams the new seat covers may be loose. Anytime you reupholster your seats it's crucial to replace the old worn out foam or especially older models that used the horsehair type padding. New padding is a 'must do', SOR's Upholstery Seat Covers are designed to fit tight with new updated foams. Technology is always moving forward allowing us to offer you a better quality replacement seat foam padding. SOR's Formed Seat Foams are manufactured from Qualex commercial grade high resolution seat foam. Each formed piece is custom designed to fit for your application. Qualex 1 inch top foam, backed with 3/4 inch layer of polyethylene pad pan filler which provides support and keeps the springs in place and not coming thru the upper foam, Qualex outer border that skirts the seat, allow for extra layer of padding and also prevents the springs and wires from cutting thru the sides of your new upholstery. Sold each.
Color Matching Note Please click and read

 
Deluxe Vinyl Seat Covers
Buy
Quantity
Part
Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
Installation
Instructions
310-72D-KIT
DELUXE SOR FRONT SEAT COVER & FOAM SET -
fits 9/71-9/72 40 Series with a 3 piece back bench seat - Set includes complete Front Bench Seat upholstery set. 5 piece upholstery set includes drivers back & bottom cover and 2 piece passenger bench back and bottom cover. Also includes 5 piece foam set. Order new hardware kits #310-9000A separately.
On Sale - Everyone gets the Discounted Price on this part.
510.00
310-72D
SOR FRONT DELUXE VINYL SEAT COVERS-
Dark Charcoal Grey Marine vinyl-Fits 9/71-9/72 FJ40 front bench seats with 3 piece back-Contoured to O.E.M. dimensions-Sewn with durable nylon thread, top stitched with matching welted seams-Designed to fit tight with new foams-5 piece set (2 bottom seat covers & 3 back seat covers for the front bench seats)
On Sale - Everyone gets the Discounted Price on this part.
(an Additional Handling Charge of 10.00 is already included in price)
385.00
Seat Foam
Highslide JS
(click for large picture)

New foam padding will greatly improve the comfort and support of your ride. SOR's upholstery sets are designed to fit properly with new foam installed so the new seat covers have a snug, tailored fit. If you use your old worn foams the new seat covers may be loose. Anytime you reupholster your seats it's crucial to replace the old worn out foam or especially older models that used the horsehair type padding. New padding is a 'must do', SOR's Upholstery Seat Covers are designed to fit tight with new updated foams. Technology is always moving forward allowing us to offer you a better quality replacement seat foam padding. SOR's Formed Seat Foams are manufactured from Qualex commercial grade high resolution seat foam. Each formed piece is custom designed to fit for your application. Qualex 1 inch top foam, backed with 3/4 inch layer of polyethylene pad pan filler which provides support and keeps the springs in place and not coming thru the upper foam, Qualex outer border that skirts the seat, allow for extra layer of padding and also prevents the springs and wires from cutting thru the sides of your new upholstery. Sold each

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
310-102A
SOR FRONT DRIVER BOTTOM PAD-
Fits 9/71-1972 FJ40 (with 3 piece back) front driver seat bottom-Manufactured from Qualex commercial grade high resolution seat foam-Qualex 1 inch top foam, backed with 3/4 inch layer of polyethylene pad pan filler, and an outer border that skirts the seat-Custom designed to fit your application-Sold each
On Sale - Everyone gets the Discounted Price on this part.
39.00
310-102B
SOR FRONT DRIVER BACK PAD-
Fits 9/71-1972 FJ40 (with 3 piece back) front driver seat back-Manufactured from Qualex commercial grade high resolution seat foam-Qualex 1 inch top foam, backed with 3/4 inch layer of polyethylene pad pan filler, and an outer border that skirts the seat-Custom designed to fit your application-Sold each
On Sale - Everyone gets the Discounted Price on this part.
39.00
310-102C
SOR FRONT PASSENGER BOTTOM PAD-
Fits 9/71-1972 FJ40 (with 3 piece back) front passenger seat bottom-Manufactured from Qualex commercial grade high resolution seat foam-Qualex 1 inch top foam, backed with 3/4 inch layer of polyethylene pad pan filler, and an outer border that skirts the seat-Custom designed to fit your application-Sold each
On Sale - Everyone gets the Discounted Price on this part.
40.00
310-102D
SOR FRONT PASSENGER LARGE BACK PAD-
Fits 9/71-1972 FJ40 (with 3 piece back) front passenger seat large back-Manufactured from Qualex commercial grade high resolution seat foam-Qualex 1 inch top foam, backed with 3/4 inch layer of polyethylene pad pan filler, and an outer border that skirts the seat-Custom designed to fit your application-Sold each
On Sale - Everyone gets the Discounted Price on this part.
35.00
310-102E
SOR FRONT PASSENGER SMALL BACK PAD-
Fits 9/71-1972 FJ40 (with 3 piece back) front passenger seat small back-Manufactured from Qualex commercial grade high resolution seat foam-Qualex 1 inch top foam, backed with 3/4 inch layer of polyethylene pad pan filler, and an outer border that skirts the seat-Custom designed to fit your application-Sold each
On Sale - Everyone gets the Discounted Price on this part.
25.00
Installation Hardware
Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
310-9000A
FRONT BENCH SEAT METAL PANEL HARDWARE KIT -
Fits 1962-1972 FJ40 & FJ45 front bench seat-40 piece set - Does both driver & passenger side rear metal seat panels.
Club Price with 20% Discount is $ 17.60 Click here for info about joining Club SOR
22.00
310-9001A
FRONT BENCH SEAT BOTTOM CUSHION HARDWARE KIT -
Fits 1962-1972 FJ40 - 40 piece set - enough hardware to do both driver & passenger bottom cushions.
Club Price with 20% Discount is $ 17.60 Click here for info about joining Club SOR
22.00
310-9003
BAG OF HOG RINGS -
Quantity 80
On Sale - Everyone gets the Discounted Price on this part.
10.95

1973-1978

Upgrade and renew your factory seats to look like new with SOR's Deluxe Vinyl Seat Covers. These restoration quality seat covers are sewn to factory patterns using O.E.M. dimensions.

  • Made of high quality Marine Grade Naugahyde vinyl to match your factory interior.
  • Sewn with durable nylon thread, top stitched with matching finished welted seams.
  • Manufactured by Specter here in the USA so you know they fit!
  • Available for all years & models, even Non-USA Land Cruisers.
  • Comes with detailed installation instructions. Step-by-step procedures from removal to installation. Includes detailed photographs printed in color. Instructions are also available in PC CD-ROM with video and DVD Video formats.
  • 1958-1978 Models are available in Dark Charcoal Gray Marine vinyl to match you factory interior. Also available in Haartz denim material, softtops material.
  • Sold in complete sets for front driver and passenger seats
  • Comes with hogrings and reinforcements - They're not just a value-add for a marketing sake like the other guys offer. They've always been part of the kit.
  • Headrest covers are sold separately.
  • SOR Seat Bottom Foam
    Remember, your upholstery will only be as good as the base you have to work with, most likely your foam is as old as the worn upholstery you are replacing. New foam padding will greatly improve the comfort and support of your ride. SOR's upholstery sets are designed to fit properly with new foam installed so the new seat covers have a snug, tailored fit. If you use your old worn foams the new seat covers may be loose. Anytime you reupholster your seats it's crucial to replace the old worn out foam or especially older models that used the horsehair type padding. New padding is a 'must do', SOR's Upholstery Seat Covers are designed to fit tight with new updated foams. Technology is always moving forward allowing us to offer you a better quality replacement seat foam padding. Sold each.
Color Matching Note Please click and read

 
SOR 40 Series Deluxe Vinyl Seat Covers
Buy
Quantity
Part
Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
Installation
Instructions
310-73D
SOR FRONT DELUXE VINYL SEAT COVERS-
Dark Charcoal Grey Marine vinyl-Fits 1973-1978 FJ40 & BJ40 front bucket seats-Contoured to O.E.M. dimensions-Sewn with durable nylon thread, top stitched with matching welted seams-Designed to fit tight with new foams-Includes hog rings-4 piece set (2 bottom seat covers & 2 back seat covers for the front bucket seats)-Matching headrest covers are sold separately, see #310-73D-H
Club Price with 20% Discount is $ 310.00 Click here for info about joining Club SOR
(an Additional Handling Charge of 10.00 is already included in price)
385.00
310-73D-KIT
SOR FRONT DELUXE VINYL SEAT COVER KIT -
Dark Charcoal Grey Marine vinyl - Fits 1973-1978 FJ40 & BJ40 front bucket seats-Contoured to O.E.M. dimensions-Sewn with durable nylon thread, top stitched with matching welted seams - Kit includes hog rings, 2 bottom seat covers, 2 back seat covers, tension wires and 2 seat bottom SOR high density bottom molded foams. Matching headrest covers are sold separately, see #310-73D-H
On Sale - Everyone gets the Discounted Price on this part.
725.00
310-73D-AHR
SOR DELUXE VINYL HEADREST COVERS-
Dark Charcoal Grey Marine vinyl-Fits 1973-1978 FJ40 & BJ40-Contoured to O.E.M. dimensions-Sewn with durable nylon thread, top stitched with matching welted seams-Sold in pairs
Club Price with 20% Discount is $ 52.00 Click here for info about joining Club SOR
65.00
SOR 40 Series Deluxe Haartz Seat Covers
SOR Photo SOR Photo SOR Photo
SOR Photo SOR Photo SOR Photo

(click for large picture)

SOR can now offer you reproduction seat upholstery sets made of the same Haartz material the softops are made of. This material is a vinyl coated canvas with a tough denim lining, it is completely waterproof and extremely durable. These upholstery sets are sewn to factory patterns and OEM dimensions. Front bucket seat covers include two bottom covers and two back covers, hog rings, and installation instruction. Matching headrest covers are sold separately. Available in Denim material in Black (BD) or Gray (GD).

 
Buy
Quantity
Part Number
Description
Price
In Stock
Installation
Instructions
310-73D-BD
SOR FRONT DELUXE DENIM SEAT COVERS-
Black denim (18 oz Haartz)-Fits 1973-1978 FJ40 & BJ40 front bucket seats-Contoured to O.E.M. dimensions-Material is waterproof-Sewn with durable nylon thread, top stitched with welted seams-Designed to fit tight with new foams-Includes hog rings-4 piece set (2 bottom seat covers & 2 back seat covers for the front bucket seats)-Matching headrest covers are sold separately, see #310-73D-BDHR
On Sale - Everyone gets the Discounted Price on this part.
(an Additional Handling Charge of 10.00 is already included in price)
405.00
310-73D-BDHR
SOR DELUXE DENIM HEADREST COVERS-
Black denim (18 oz Haartz)-Fits 1973-1978 FJ40 & BJ40-Contoured to O.E.M. dimensions-Sewn with durable nylon thread, top stitched with welted seams-Sold in pairs
Club Price with 20% Discount is $ 48.00 Click here for info about joining Club SOR
60.00
310-73D-GD
SOR FRONT DELUXE DENIM SEAT COVERS-
Grey denim (18 oz Haartz)-Fits 1973-1978 FJ40 & BJ40 front bucket seats-Contoured to O.E.M. dimensions-Material is waterproof-Sewn with durable nylon thread, top stitched with welted seams-Designed to fit tight with new foams-Includes hog rings-4 piece set (2 bottom seat covers & 2 back seat covers for the front bucket seats)-Matching headrest covers are sold separately, see #310-73D-GDHR
On Sale - Everyone gets the Discounted Price on this part.
(an Additional Handling Charge of 10.00 is already included in price)
405.00
310-73D-GDHR
SOR DELUXE DENIM HEADREST COVERS-
Grey denim (18 oz Haartz)-Fits 1973-1978 FJ40 & BJ40-Contoured to O.E.M. dimensions-Sewn with durable nylon thread, top stitched with welted seams-Sold in pairs
Club Price with 20% Discount is $ 48.00 Click here for info about joining Club SOR
60.00
Seat Foam
Highslide JS
(click for large picture)

New foam padding will greatly improve the comfort and support of your ride. SOR's upholstery sets are designed to fit properly with new foam installed so the new seat covers have a snug, tailored fit. If you use your old worn foams the new seat covers may be loose. Anytime you reupholster your seats it's crucial to replace the old worn out foam or especially older models that used the horsehair type padding. New padding is a 'must do', SOR's Upholstery Seat Covers are designed to fit tight with new updated foams. Technology is always moving forward allowing us to offer you a better quality replacement seat foam padding. SOR's Formed Seat Foams are manufactured from Qualex commercial grade high resolution seat foam. Each formed piece is custom designed to fit for your application. Qualex 1 inch top foam, backed with 3/4 inch layer of polyethylene pad pan filler which provides support and keeps the springs in place and not coming thru the upper foam, Qualex outer border that skirts the seat, allow for extra layer of padding and also prevents the springs and wires from cutting thru the sides of your new upholstery. Sold each.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
310-81D-PR
PAIR SOR HIGH DENSITY BOTTOM MOLDED FOAM-
Fits 1973-1978 FJ40 & BJ40 front driver or passenger seat bottom-Contoured to exact factory dimensions-SOLD IN A PAIR.
On Sale - Everyone gets the Discounted Price on this part.
399.00
310-81D
SOR HIGH DENSITY BOTTOM MOLDED FOAM-
Fits 1973-1978 FJ40 & BJ40 front driver or passenger seat bottom-Contoured to exact factory dimensions-SOLD EACH.
On Sale - Everyone gets the Discounted Price on this part.
210.00
310-103A
SOR BOTTOM FOAM PADDING-
Fits 1973-1978 FJ40 & BJ40 front driver or passenger seat bottom-Manufactured from Qualex commercial grade high resolution seat foam-Sold each
On Sale - Everyone gets the Discounted Price on this part.
95.00
Installation Hardware
Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
310-9000B
FRONT BUCKET SEATS METAL PANEL HARDWARE KIT -
Fits 1973-1978 FJ40 front bucket seats-16 piece set-Does both front bucket seats back metal panels.
Club Price with 20% Discount is $ 13.48 Click here for info about joining Club SOR
16.85
310-9003
BAG OF HOG RINGS -
Quantity 80
On Sale - Everyone gets the Discounted Price on this part.
10.95

Left Hand Seat Bracket Extensions
SOR Photo
Before & After
(click for large picture)

The 40 series vehicles built from 9/72 to 1978 with bucket seats have a limited amount of leg room for the driver. The Driver Seat Extension Kit adds 2 1/2 inches of additional leg room, increasing driver comfort for people 5 feet 8 inches and taller. This is a restoration quality part and is very OEM in appearance. Matte black powder coat finish. No drilling or modifications required, bolt in installation.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
118-475
LEFT HAND DRIVE SEAT BRACKET EXTENSION KIT -
Fits 9/72-1978 40 Series Left Hand Drive, Bucket Seat. Driver Seat Moves driver's seat towards the back of vehicle increasing leg room by 2-1/2 inches. Sold as complete kit only.
(Discontinued - Not available at this time)
0.00

1979-1984

Upgrade and renew your factory seats to look like new with SOR's Deluxe Vinyl Seat Covers. These restoration quality seat covers are sewn to factory patterns using O.E.M. dimensions.

  • Made of high quality Marine Grade Naugahyde vinyl to match your factory interior.
  • Sewn with durable nylon thread, top stitched with matching finished welted seams.
  • Manufactured by Specter here in the USA so you know they fit!
  • Available for all years & models, even Non-USA Land Cruisers.
  • Comes with detailed installation instructions. Step-by-step procedures from removal to installation. Includes detailed photographs printed in color. Instructions are also available in PC CD-ROM with video and DVD Video formats.
  • 1979-1984 Models are available in Light Charcoal Gray Marine vinyl
  • Sold in complete sets for front driver and passenger seats
  • Comes with hogrings and reinforcements. They're not just a value-add for a marketing sake like the other guys offer. They've always been part of the kit.
  • Headrest covers are sold separately.
  • Remember, your upholstery will only be as good as the base you have to work with, most likely your foam is as old as the worn upholstery you are replacing. New foam padding will greatly improve the comfort and support of your ride. SOR's upholstery sets are designed to fit properly with new foam installed so the new seat covers have a snug, tailored fit. If you use your old worn foams the new seat covers may be loose. Anytime you reupholster your seats it's crucial to replace the old worn out foam or especially older models that used the horsehair type padding. New padding is a 'must do', SOR's Upholstery Seat Covers are designed to fit tight with new updated foams. Technology is always moving forward allowing us to offer you a better quality replacement seat foam padding. SOR's Formed Seat Foams are manufactured from Qualex commercial grade high resolution seat foam. Each formed piece is custom designed to fit for your application. Qualex 1 inch top foam, backed with 3/4 inch layer of polyethylene pad pan filler which provides support and keeps the springs in place and not coming thru the upper foam, Qualex outer border that skirts the seat, allow for extra layer of padding and also prevents the springs and wires from cutting thru the sides of your new upholstery. Sold each.
Color Matching Note Please click and read

 
SOR 40 Series Deluxe Vinyl Seat Covers
Buy
Quantity
Part
Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
Installation
Instructions
310-79D
SOR FRONT DELUXE VINYL SEAT COVERS-
Light Charcoal Grey Marine vinyl-Fits 1979-8/80 FJ40 & BJ40 front bucket seats-Contoured to O.E.M. dimensions-Sewn with durable nylon thread, top stitched with matching welted seams-Designed to fit tight with new foams-Includes hog rings-4 piece set (2 bottom seat covers & 2 back seat covers for the front bucket seats)-Matching headrest covers are sold separately, see #310-79D-H
Club Price with 20% Discount is $ 326.00 Click here for info about joining Club SOR
(an Additional Handling Charge of 10.00 is already included in price)
405.00
310-79D-KIT
SOR FRONT DELUXE VINYL SEAT COVER KIT -
Light Charcoal Grey Marine vinyl - Fits 1979-1984 FJ40 & BJ40 front bucket seats-Contoured to O.E.M. dimensions-Sewn with durable nylon thread, top stitched with matching welted seams - Kit includes hog rings, 2 bottom seat covers, 2 back seat covers, tension wires and 2 seat bottom foams. Matching headrest covers are sold separately, see #310-79D-H
On Sale - Everyone gets the Discounted Price on this part.
725.00
310-79D-H
SOR DELUXE VINYL HEADREST COVERS-
Light Charcoal Grey Marine vinyl-Fits 1979-8/80 FJ40 & BJ40-Contoured to O.E.M. dimensions-Sewn with durable nylon thread, top stitched with matching welted seams-Sold in pairs
Club Price with 20% Discount is $ 56.00 Click here for info about joining Club SOR
70.00
310-80D
SOR FRONT DELUXE VINYL SEAT COVERS-
Light Charcoal Grey Marine vinyl-Fits 8/80-1984 FJ40 & BJ40 front bucket seats-Contoured to O.E.M. dimensions-Sewn with durable nylon thread, top stitched with matching welted seams-Designed to fit tight with new foams-Includes hog rings-4 piece set (2 bottom seat covers & 2 back seat covers for the front bucket seats)-Matching headrest covers are sold separately, see #310-80D-H
Club Price with 20% Discount is $ 326.00 Click here for info about joining Club SOR
(an Additional Handling Charge of 10.00 is already included in price)
405.00
310-80D-H
SOR DELUXE VINYL HEADREST COVERS-
Light Charcoal Grey Marine vinyl-Fits 8/80-1984 FJ40 & BJ40-Contoured to O.E.M. dimensions-Sewn with durable nylon thread, top stitched with matching welted seams-Sold in pairs
Club Price with 20% Discount is $ 56.00 Click here for info about joining Club SOR
70.00
Seat Foam
Highslide JS
(click for large picture)

New foam padding will greatly improve the comfort and support of your ride. SOR's upholstery sets are designed to fit properly with new foam installed so the new seat covers have a snug, tailored fit. If you use your old worn foams the new seat covers may be loose. Anytime you reupholster your seats it's crucial to replace the old worn out foam or especially older models that used the horsehair type padding. New padding is a 'must do', SOR's Upholstery Seat Covers are designed to fit tight with new updated foams. Technology is always moving forward allowing us to offer you a better quality replacement seat foam padding. SOR's Formed Seat Foams are manufactured from Qualex commercial grade high resolution seat foam. Each formed piece is custom designed to fit for your application. Qualex 1 inch top foam, backed with 3/4 inch layer of polyethylene pad pan filler which provides support and keeps the springs in place and not coming thru the upper foam, Qualex outer border that skirts the seat, allow for extra layer of padding and also prevents the springs and wires from cutting thru the sides of your new upholstery. Sold each

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
310-82D-PR
PAIR SOR HIGH DENSITY BOTTOM MOLDED FOAM-
Fits 1979-1984 FJ40 & BJ40 front driver or passenger seat bottom-Contoured to exact factory dimensions-SOLD IN PAIRS.
On Sale - Everyone gets the Discounted Price on this part.
380.00
310-82D
SOR HIGH DENSITY BOTTOM MOLDED FOAM-
Fits 1979-1984 FJ40 & BJ40 front driver or passenger seat bottom-Contoured to exact factory dimensions-SOLD EACH.
On Sale - Everyone gets the Discounted Price on this part.
210.00
Hog Rings
Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
310-9003
BAG OF HOG RINGS -
Quantity 80
On Sale - Everyone gets the Discounted Price on this part.
10.95

DVD and CD Video Instruction

Seat Cover Installation DVD
SOR Photo
(click for large picture)

Learn the tips and tricks of covering your Land Cruiser seats from upholstery professionals. If you are thinking of re-covering your seats yourself but have no experience, you will find this DVD very useful. The sewing department at Specter Off-Road has prepared this DVD to walk you step-by-step through the seat cover installation process. The video begins with the preparation overview and continues with detailed installation. Menu driven so reviewing sections is easy. This CD is also useful for learning how to install 60 Series front seat covers and features a seat frame comparison. The comparison is a side-by-side view of both types of 40 Series bucket seat frames and 60 Series frames. The information on this CD is well worth the cost and saves you time in the long run.Approximately 20 minutes of narrated video. NTSC DVD only.

Buy
Quantity
Part Number
Description
Price
*In Stock
310-002
SEAT COVER DVD-
1973-1984 FJ40 BJ40 Front Bucket Seats. Approximately 20 minutes of narrated video. NTSC DVD only. Learn the tips and tricks of covering your Land Cruiser seats from upholstery professionals.
Club Price with 20% Discount is $ 10.39 Click here for info about joining Club SOR
12.99
Seat Cover Installation CD
Upholstery Install CD
  SOR Photo SOR Photo SOR Photo
SOR Photo SOR Photo SOR Photo

Actual Screen Shots (Click on a picture to for a larger view)
System requirements: 1.2 mHz Pentium with 128 MB of available RAM, Windows XP or later.

Learn the tips and tricks of covering your Land Cruiser seats from upholstery professionals. If you are thinking of re-covering your seats yourself but have no experience, you will find this CD very useful. The sewing department at Specter Off-Road has prepared this interactive multimedia CD to walk you step-by-step through the seat cover installation process. The CD begins with the Preparation overview and continues with a Tools overview. The heart of the CD is a detailed installation section which includes approximately 15 minutes of narrated video. Topics covered include; old upholstery removal, and installing new SOR 40 Series Deluxe Front Seat Covers. You will also find detailed instructions for headrest guide removal and installation and seat back panel reinstallation. This CD is also useful for learning how to install 60 Series front seat covers and features a seat frame comparison. The comparison is a side-by-side view of both types of 40 Series bucket seat frames and 60 Series frames. The information on this CD is well worth the cost and saves you time in the long run.

Buy
Quantity
Part Number
Description
Price
*In Stock
310-001
SEAT COVER INSTALL CD -
Fits 1973-1984 FJ40 BJ40. System requirements: 1.2 mHz Pentium with 128 MB of available RAM, Windows XP, Vista or Windows 7.
Club Price with 20% Discount is $ 10.39 Click here for info about joining Club SOR
12.99
Matching Texture and Color
Upholstery, Carpet and Seat Covers Fabrics, carpets, and colored materials used to manufacturer seat covers, carpet sets and other cosmetic items will vary in color from dye lot to dye lot. So for example, a gray seat cover made today will be a slightly different color and texture from a cover made from a different lot of material years ago from the same manufacturer. SOR recommends if you are interested in carpets, seat covers and other fabric items matching color and texture, that they be ordered at the same time so the items are made from the same dye lot of material. SOR can not be responsible for color and texture of items purchased at different times.
<< Top of Page >>

Specter Off-Road, Inc.

World's Largest Supplier of Land Cruiser Parts & Accessories. Providing Quality Parts Since 1983
© Copyright 1996 - Specter Off-Road, Inc. All rights reserved. Specter Off-Road, Inc. is not affiliated with Toyota Motor Sales or Toyota Motor Corporation.
TT=00:00:02 659 54.167.44.32

Contact SOR
Mailing Address: 21600 Nordhoff St. Chatsworth, California 91311 USA
Customer Entrance: 21601 Osborne St. (We're a city block long)
Phone: (818) 882-1238, Fax: (818) 882-7144, Email: sor@sor.com
Hours: Monday-Friday 8:00AM-6PM PST,
Closed Saturday & Sunday