0
 
You must Register and/or Login to save a shopping cart
You have 0 Items in your Cart Sub Total: $ 0.00
Providing Quality Parts to the Land Cruiser Community Since 1983
California Proposition 65 Notice
WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, cadmium and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to www.P65Warnings.ca.gov/passenger-vehicle.
Monthly Specials
FJ55 Glove Box Door
Starting at: $ 159.00

Search
<<  Browse Catalog  >>


...Featured Product...

Page 311 Land Cruiser 40 Series Rear Jump Seat Covers

<<< >>> 40 Series Rear Seat Covers 45 & 47 Series Rear Seat Covers FJ25 Rear Seat Covers Cushions & Hardware
40 Series Rear Seat Covers

1965-9/71

SOR 40 Series Deluxe Vinyl Rear Jump Seat Covers
SOR Photo
(click for large picture)

Upgrade and renew your factory rear seats to look like new with SOR's Deluxe Vinyl Rear Jump Seat Covers. These restoration quality seat covers are sewn to factory patterns using OEM dimensions. Made of high quality marine grade Naugahyde vinyl to match your factory interior. Sewn with durable nylon thread, top stitched with matching finished welted seams. SOR's Deluxe Vinyl Rear Jump Seat Covers are made to fit like a glove, tailored to fit your year and model. Manufactured by Specter so you know they fit! Available for all years, and models, even Non-USA Land Cruisers.

1958-1978 models are available in Dark Charcoal Gray Marine vinyl, and 1979-1984 models are available in Light Charcoal Gray Marine vinyl to match your factory interior. Seat covers are sold in complete sets for both rear jump seats, two bottoms and two backs. Remember, your upholstery will only be as good as the base you have to work with, most likely your foam is as old as the worn upholstery you are replacing. New foam padding will greatly improve the comfort and support of your ride. SOR's upholstery sets are designed to fit properly with new foams installed so the new seat covers have a snug, tailored fit. If you use your old worn foams the new seat covers may be loose. Be sure to read information on SOR's high density foam padding. So do the job right, replace the seat foams, paint the seat frames, paint the metal back panels and replace the hardware on the metal back panels. You will be impressed how nice your finished upholstered seats look. Increase the value of your Cruiser and restore your interior to look like brand new.

Color Matching Note Please click and read

 
Buy
Quantity
Part
Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
Installation
Instructions
311-6500-KIT
CORAL DELUX SOR REAR SEAT COVER & FOAM SET -**Special Order NO Return
Fits 1962-9/71 40 Series - Set includes complete Rear Jump Seat upholstery set. 4 piece upholstery set includes 2 bottom and 2 back upholstery seat covers. Also includes 4 piece foam set. Order new hardware kits #311-930A separately.
On Sale - Everyone gets the Discounted Price on this part.
Special Order NO Return
350.00
311-7040-KIT
GREY DELUX SOR REAR SEAT COVER & FOAM SET -
fits 1962-9/71 40 Series rear jump seats - Set includes complete Rear Jump Seat upholstery set. 4 piece upholstery set includes 2 bottom and 2 back upholstery seat covers. Also includes 4 piece foam set. Order new hardware kits #311-930A separately.
On Sale - Everyone gets the Discounted Price on this part.
325.00
311-7040
SOR REAR DELUXE VINYL SEAT COVERS-
Dark Charcoal Grey Marine vinyl-Fits 1965-9/71 FJ40 rear jump seats. Seat measures 35 1/2 inches by 16 inches-Contoured to O.E.M. dimensions-Sewn with durable nylon thread, top stitched with matching welted seams-Designed to fit tight with new foams-4 piece set (2 bottom seat covers & 2 back seat covers for the rear jump seats)
Club Price with 15% Discount is $ 178.50 Click here for info about joining Club SOR
210.00
SOR Jump Seat Foams
SOR Photo
(click for large picture)

Anytime you reupholster your seats it's crucial to replace the old worn out foam or especially older models that used the horsehair type padding. New padding is a 'must do'. SOR's Upholstery Seat Covers are designed to fit tight with new updated foams. Technology is always moving forward allowing us to offer you a better quality replacement seat foam padding. SOR's Jump Seat Foams are manufactured from 2 inch Qualex commercial grade high resolution seat foam. Each formed piece is custom designed to fit for your application. Sold each.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
311-900A
SOR REAR BOTTOM JUMP SEAT FOAM-
Fits 1963-9/71 FJ40 rear jump seat bottom-Manufactured from 2 inch Qualex commercial grade high resolution seat foam-Custom designed to fit your application-Sold each
On Sale - Everyone gets the Discounted Price on this part.
46.00
311-900B
SOR REAR BACK JUMP SEAT FOAM-
Fits 1963-9/71 FJ40 rear jump seat back-Manufactured from 2 inch Qualex commercial grade high resolution seat foam-Custom designed to fit your application-Sold each
On Sale - Everyone gets the Discounted Price on this part.
40.00
Metal Panel Hardware Kits

If you are restoring your Cruiser take the time to do the job all the way. After you remove the old seat covers, sand blast and repaint the frames, but before you install new padding and upholstery, don't forget the small details that really make the difference. Installing new hardware really finishes off the job. Now SOR has made it easy for you to purchase a kit that replaces the hardware for the rear metal panels on the factory jump seats. One kit does one jump seat

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
311-930A
REAR JUMP SEAT METAL PANEL HARDWARE KIT -
Fits 1965-1978 FJ40 rear jump seat - 35 piece set - Does 1 jump seat
Club Price with 15% Discount is $ 15.58 Click here for info about joining Club SOR
18.33
Replacement Jump Seat Straps, Bumpers and Twists
SOR Photo
(click for large picture)

Increase the value of your Land Cruiser and restore your interior to look like brand new. Don't forget the details that finish off the job and make the interior look like it did when it rolled off the production line. After you replace the upholstery and the seat foams, inspect and replace all the old worn parts. SOR stocks all the replacement parts you need to replace your straps, twists, bumpers, and hardware. You will be impressed with the results.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
311-940A-A
JUMP SEAT STRAPS-
AFTERMARKET-Fits 1958-9/73 FJ40-Made of black nylon strapping - Approximate length eyelet to eyelet 7.5 inches - Sold in pairs
Club Price with 15% Discount is $ 23.94 Click here for info about joining Club SOR
28.16
311-950
REAR JUMP SEAT BUMPER-**Special Order NO Return
Fits 1958-4/78 FJ40-2 per side required
Club Price with 15% Discount is $ 8.08 Click here for info about joining Club SOR
Special Order NO Return
9.51
311-951A
1.68
311-952
JUMP SEAT BUMPER NUT WITH WASHER-
Fits 1958-4/78 FJ40
Club Price with 15% Discount is $ 0.62 Click here for info about joining Club SOR
0.73
311-955
2.00
311-956
OEM TWIST FASTENER -
comes w/nut and lock washer - sold each
On Sale - Everyone gets the Discounted Price on this part.
10.55
311-957
AFTERMARKET TWIST FASTENER -
comes w/flanged lock nut - sold each
Club Price with 15% Discount is $ 5.23 Click here for info about joining Club SOR
6.15
Jump Seat Spring
Highslide JS Highslide JS Highslide JS
(click for large picture)
Buy
Quantity
Part Number
Description
Price
*In Stock
118-959A
JUMPSEAT SPRING -
Fits 1958-9/73 FJ40-SOLD EACH
(Discontinued - Not available at this time)
0.00

9/71-9/72

SOR 40 Series Deluxe Vinyl Rear Jump Seat Covers
SOR Photo
(click for large picture)

Upgrade and renew your factory rear seats to look like new with SOR's Deluxe Vinyl Rear Jump Seat Covers. These restoration quality seat covers are sewn to factory patterns using OEM dimensions. Made of high quality marine grade Naugahyde vinyl to match your factory interior. Sewn with durable nylon thread, top stitched with matching finished welted seams. SOR's Deluxe Vinyl Rear Jump Seat Covers are made to fit like a glove, tailored to fit your year and model. Manufactured by Specter so you know they fit! Available for all years, and models, even Non-USA Land Cruisers.

1958-1978 models are available in Dark Charcoal Gray Marine vinyl, and 1979-1984 models are available in Light Charcoal Gray Marine vinyl to match your factory interior. Seat covers are sold in complete sets for both rear jump seats, two bottoms and two backs. Remember, your upholstery will only be as good as the base you have to work with, most likely your foam is as old as the worn upholstery you are replacing. New foam padding will greatly improve the comfort and support of your ride. SOR's upholstery sets are designed to fit properly with new foams installed so the new seat covers have a snug, tailored fit. If you use your old worn foams the new seat covers may be loose. Be sure to read information on SOR's high density foam padding. So do the job right, replace the seat foams, paint the seat frames, paint the metal back panels and replace the hardware on the metal back panels. You will be impressed how nice your finished upholstered seats look. Increase the value of your Cruiser and restore your interior to look like brand new.

Color Matching Note Please click and read

 
Buy
Quantity
Part
Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
Installation
Instructions
311-7140-KIT
DELUX SOR REAR SEAT COVER & FOAM SET -
fits 9/71-9/72 40 Series with angle cut bottom bench seats (angle at the front of the bottom seat) - Set includes complete Rear Jump Seat upholstery set. 4 piece upholstery set includes 2 bottom and 2 back upholstery seat covers. Also includes 4 piece foam set. Order new hardware kits #311-930A separately.
On Sale - Everyone gets the Discounted Price on this part.
325.00
311-7140
SOR REAR DELUXE VINYL SEAT COVERS-
Dark Charcoal Grey Marine vinyl-Fits 9/71-9/72 FJ40 with angle cut bottom bench seats (angle at the front of the bottom seat). Rear jump seats-35 1/2 inches by 16 inches-Contoured to O.E.M. dimensions-Sewn with durable nylon thread, top stitched with matching welted seams-Designed to fit tight with new foams-4 piece set (2 bottom seat covers & 2 back seat covers for the rear jump seats)
Club Price with 15% Discount is $ 185.30 Click here for info about joining Club SOR
218.00
SOR Jump Seat Foams
SOR Photo SOR Photo
(click for large picture)

Anytime you reupholster your seats it's crucial to replace the old worn out foam or especially older models that used the horsehair type padding. New padding is a 'must do'. SOR's Upholstery Seat Covers are designed to fit tight with new updated foams. Technology is always moving forward allowing us to offer you a better quality replacement seat foam padding. SOR's Jump Seat Foams are manufactured from 2 inch Qualex commercial grade high resolution seat foam. Each formed piece is custom designed to fit for your application. Sold each.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
311-901A-L
SOR REAR LEFT BOTTOM JUMP SEAT FOAM-
Fits 9/71-9/73 FJ40 (with angle cut in front end of seat) rear left jump seat bottom-Manufactured from 2 inch Qualex commercial grade high resolution seat foam-Custom designed to fit your application-Sold each
On Sale - Everyone gets the Discounted Price on this part.
39.00
311-901A-R
SOR REAR RIGHT BOTTOM JUMP SEAT FOAM-
Fits 9/71-9/73 FJ40 & BJ40 (with angle cut in front end of seat) rear right jump seat bottom-Manufactured from 2 inch Qualex commercial grade high resolution seat foam-Custom designed to fit your application-Sold each
On Sale - Everyone gets the Discounted Price on this part.
39.00
311-901B
SOR REAR BACK JUMP SEAT FOAM-
Fits 9/71-9/73 FJ40 & BJ40 rear jump seat back-Manufactured from 2 inch Qualex commercial grade high resolution seat foam-Custom designed to fit your application-Sold each
On Sale - Everyone gets the Discounted Price on this part.
40.00
Metal Panel Hardware Kits

If you are restoring your Cruiser take the time to do the job all the way. After you remove the old seat covers, sand blast and repaint the frames, but before you install new padding and upholstery, don't forget the small details that really make the difference. Installing new hardware really finishes off the job. Now SOR has made it easy for you to purchase a kit that replaces the hardware for the rear metal panels on the factory jump seats. One kit does one jump seat

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
311-930A
REAR JUMP SEAT METAL PANEL HARDWARE KIT -
Fits 1965-1978 FJ40 rear jump seat - 35 piece set - Does 1 jump seat
Club Price with 15% Discount is $ 15.58 Click here for info about joining Club SOR
18.33
Replacement Jump Seat Straps, Bumpers and Twists
SOR Photo
(click for large picture)

Increase the value of your Land Cruiser and restore your interior to look like brand new. Don't forget the details that finish off the job and make the interior look like it did when it rolled off the production line. After you replace the upholstery and the seat foams, inspect and replace all the old worn parts. SOR stocks all the replacement parts you need to replace your straps, twists, bumpers, and hardware. You will be impressed with the results.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
311-940A-A
JUMP SEAT STRAPS-
AFTERMARKET-Fits 1958-9/73 FJ40-Made of black nylon strapping - Approximate length eyelet to eyelet 7.5 inches - Sold in pairs
Club Price with 15% Discount is $ 23.94 Click here for info about joining Club SOR
28.16
311-950
REAR JUMP SEAT BUMPER-**Special Order NO Return
Fits 1958-4/78 FJ40-2 per side required
Club Price with 15% Discount is $ 8.08 Click here for info about joining Club SOR
Special Order NO Return
9.51
311-951A
1.68
311-952
JUMP SEAT BUMPER NUT WITH WASHER-
Fits 1958-4/78 FJ40
Club Price with 15% Discount is $ 0.62 Click here for info about joining Club SOR
0.73
311-955
2.00
311-956
OEM TWIST FASTENER -
comes w/nut and lock washer - sold each
On Sale - Everyone gets the Discounted Price on this part.
10.55
311-957
AFTERMARKET TWIST FASTENER -
comes w/flanged lock nut - sold each
Club Price with 15% Discount is $ 5.23 Click here for info about joining Club SOR
6.15
Jump Seat Spring
Highslide JS Highslide JS Highslide JS
(click for large picture)
Buy
Quantity
Part Number
Description
Price
*In Stock
118-959A
JUMPSEAT SPRING -
Fits 1958-9/73 FJ40-SOLD EACH
(Discontinued - Not available at this time)
0.00

9/72-9/73

SOR 40 Series Deluxe Vinyl Rear Jump Seat Covers
SOR Photo
(click for large picture)

Upgrade and renew your factory rear seats to look like new with SOR's Deluxe Vinyl Rear Jump Seat Covers. These restoration quality seat covers are sewn to factory patterns using OEM dimensions. Made of high quality marine grade Naugahyde vinyl to match your factory interior. Sewn with durable nylon thread, top stitched with matching finished welted seams. SOR's Deluxe Vinyl Rear Jump Seat Covers are made to fit like a glove, tailored to fit your year and model. Manufactured by Specter so you know they fit! Available for all years, and models, even Non-USA Land Cruisers.

1958-1978 models are available in Dark Charcoal Gray Marine vinyl, and 1979-1984 models are available in Light Charcoal Gray Marine vinyl to match your factory interior. Seat covers are sold in complete sets for both rear jump seats, two bottoms and two backs. Remember, your upholstery will only be as good as the base you have to work with, most likely your foam is as old as the worn upholstery you are replacing. New foam padding will greatly improve the comfort and support of your ride. SOR's upholstery sets are designed to fit properly with new foams installed so the new seat covers have a snug, tailored fit. If you use your old worn foams the new seat covers may be loose. Be sure to read information on SOR's high density foam padding. So do the job right, replace the seat foams, paint the seat frames, paint the metal back panels and replace the hardware on the metal back panels. You will be impressed how nice your finished upholstered seats look. Increase the value of your Cruiser and restore your interior to look like brand new.

Color Matching Note Please click and read

 
Buy
Quantity
Part
Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
Installation
Instructions
311-7141-KIT
SOR REAR DELUXE VINYL SEAT COVER KIT-
Dark Charcoal Grey Marine vinyl - Fits 9/72-9/73 FJ40 (with angle cut in front end of seat) rear jump seats-Has fuel separator behind passenger seat-35 1/2 inches by 16 inches-Contoured to O.E.M. dimensions - Sewn with durable nylon thread, top stitched with matching welted seams. Kit includes 2 bottom seat covers, 2 back seat covers, 2 back foams, 2 bottom foams and tension wires.
On Sale - Everyone gets the Discounted Price on this part.
325.00
311-7141
SOR REAR DELUXE VINYL SEAT COVERS-
Dark Charcoal Grey Marine vinyl-Fits 9/72-9/73 FJ40 (with angle cut in front end of seat) rear jump seats-Has fuel separator behind passenger seat-35 1/2 inches by 16 inches-Contoured to O.E.M. dimensions-Sewn with durable nylon thread, top stitched with matching welted seams-Designed to fit tight with new foams-4 piece set (2 bottom seat covers & 2 back seat covers for the rear jump seats)
On Sale - Everyone gets the Discounted Price on this part.
218.00
SOR Jump Seat Foams
SOR Photo SOR Photo
(click for large picture)

Anytime you reupholster your seats it's crucial to replace the old worn out foam or especially older models that used the horsehair type padding. New padding is a 'must do'. SOR's Upholstery Seat Covers are designed to fit tight with new updated foams. Technology is always moving forward allowing us to offer you a better quality replacement seat foam padding. SOR's Jump Seat Foams are manufactured from 2 inch Qualex commercial grade high resolution seat foam. Each formed piece is custom designed to fit for your application. Sold each.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
311-901A-L
SOR REAR LEFT BOTTOM JUMP SEAT FOAM-
Fits 9/71-9/73 FJ40 (with angle cut in front end of seat) rear left jump seat bottom-Manufactured from 2 inch Qualex commercial grade high resolution seat foam-Custom designed to fit your application-Sold each
On Sale - Everyone gets the Discounted Price on this part.
39.00
311-901A-R
SOR REAR RIGHT BOTTOM JUMP SEAT FOAM-
Fits 9/71-9/73 FJ40 & BJ40 (with angle cut in front end of seat) rear right jump seat bottom-Manufactured from 2 inch Qualex commercial grade high resolution seat foam-Custom designed to fit your application-Sold each
On Sale - Everyone gets the Discounted Price on this part.
39.00
311-901B
SOR REAR BACK JUMP SEAT FOAM-
Fits 9/71-9/73 FJ40 & BJ40 rear jump seat back-Manufactured from 2 inch Qualex commercial grade high resolution seat foam-Custom designed to fit your application-Sold each
On Sale - Everyone gets the Discounted Price on this part.
40.00
Metal Panel Hardware Kits

If you are restoring your Cruiser take the time to do the job all the way. After you remove the old seat covers, sand blast and repaint the frames, but before you install new padding and upholstery, don't forget the small details that really make the difference. Installing new hardware really finishes off the job. Now SOR has made it easy for you to purchase a kit that replaces the hardware for the rear metal panels on the factory jump seats. One kit does one jump seat

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
311-930A
REAR JUMP SEAT METAL PANEL HARDWARE KIT -
Fits 1965-1978 FJ40 rear jump seat - 35 piece set - Does 1 jump seat
Club Price with 15% Discount is $ 15.58 Click here for info about joining Club SOR
18.33
Replacement Jump Seat Straps, Bumpers and Twists
SOR Photo
(click for large picture)

Increase the value of your Land Cruiser and restore your interior to look like brand new. Don't forget the details that finish off the job and make the interior look like it did when it rolled off the production line. After you replace the upholstery and the seat foams, inspect and replace all the old worn parts. SOR stocks all the replacement parts you need to replace your straps, twists, bumpers, and hardware. You will be impressed with the results.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
311-940A-A
JUMP SEAT STRAPS-
AFTERMARKET-Fits 1958-9/73 FJ40-Made of black nylon strapping - Approximate length eyelet to eyelet 7.5 inches - Sold in pairs
Club Price with 15% Discount is $ 23.94 Click here for info about joining Club SOR
28.16
311-950
REAR JUMP SEAT BUMPER-**Special Order NO Return
Fits 1958-4/78 FJ40-2 per side required
Club Price with 15% Discount is $ 8.08 Click here for info about joining Club SOR
Special Order NO Return
9.51
311-951A
1.68
311-952
JUMP SEAT BUMPER NUT WITH WASHER-
Fits 1958-4/78 FJ40
Club Price with 15% Discount is $ 0.62 Click here for info about joining Club SOR
0.73
311-955
2.00
311-956
OEM TWIST FASTENER -
comes w/nut and lock washer - sold each
On Sale - Everyone gets the Discounted Price on this part.
10.55
311-957
AFTERMARKET TWIST FASTENER -
comes w/flanged lock nut - sold each
Club Price with 15% Discount is $ 5.23 Click here for info about joining Club SOR
6.15
Jump Seat Spring
Highslide JS Highslide JS Highslide JS
(click for large picture)
Buy
Quantity
Part Number
Description
Price
*In Stock
118-959A
JUMPSEAT SPRING -
Fits 1958-9/73 FJ40-SOLD EACH
(Discontinued - Not available at this time)
0.00

9/73-1978

SOR 40 Series Deluxe Vinyl Rear Jump Seat Covers
SOR Photo
(click for large picture)

Upgrade and renew your factory rear seats to look like new with SOR's Deluxe Vinyl Rear Jump Seat Covers. These restoration quality seat covers are sewn to factory patterns using OEM dimensions. Made of high quality marine grade Naugahyde vinyl to match your factory interior. Sewn with durable nylon thread, top stitched with matching finished welted seams. SOR's Deluxe Vinyl Rear Jump Seat Covers are made to fit like a glove, tailored to fit your year and model. Manufactured by Specter so you know they fit! Available for all years, and models, even Non-USA Land Cruisers.

1958-1978 models are available in Dark Charcoal Gray Marine vinyl, and 1979-1984 models are available in Light Charcoal Gray Marine vinyl to match your factory interior. Seat covers are sold in complete sets for both rear jump seats, two bottoms and two backs. Remember, your upholstery will only be as good as the base you have to work with, most likely your foam is as old as the worn upholstery you are replacing. New foam padding will greatly improve the comfort and support of your ride. SOR's upholstery sets are designed to fit properly with new foams installed so the new seat covers have a snug, tailored fit. If you use your old worn foams the new seat covers may be loose. Be sure to read information on SOR's high density foam padding. So do the job right, replace the seat foams, paint the seat frames, paint the metal back panels and replace the hardware on the metal back panels. You will be impressed how nice your finished upholstered seats look. Increase the value of your Cruiser and restore your interior to look like brand new.

Color Matching Note Please click and read

 
Buy
Quantity
Part
Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
Installation
Instructions
311-7340-KIT
SOR REAR DELUXE VINYL SEAT COVER KIT-
Dark Charcoal Grey Marine vinyl - Fits 9/73-4/78 FJ40 Rear jump seats -21- 1/2 inches by 16 inches-Contoured to O.E.M. dimensions - Sewn with durable nylon thread, top stitched with matching welted seams. Kit includes 2 bottom seat covers, 2 back seat covers, 2 back foams, 2 bottom foams and tension wires.
Club Price with 15% Discount is $ 263.50 Click here for info about joining Club SOR
310.00
311-7341-KIT
SOR REAR DELUXE VINYL SEAT COVER KIT-
Dark Charcoal Grey Marine vinyl - Fits 4/78-12/78 FJ40 Rear jump seats -21- 1/2 inches by 16 inches-Contoured to O.E.M. dimensions - Sewn with durable nylon thread, top stitched with matching welted seams. Kit includes 2 bottom seat covers, 2 back seat covers, 2 back foams, 2 bottom foams and tension wires.
Club Price with 15% Discount is $ 255.00 Click here for info about joining Club SOR
300.00
311-7340
SOR REAR DELUXE VINYL SEAT COVERS-
Dark Charcoal Grey Marine vinyl-Fits 9/73-1978 FJ40 & BJ40 rear jump seats-21 1/2 inches by 16 inches-Contoured to O.E.M. dimensions-Sewn with durable nylon thread, top stitched with matching welted seams-Designed to fit tight with new foams-4 piece set (2 bottom seat covers & 2 back seat covers for the rear jump seats)
Club Price with 15% Discount is $ 185.30 Click here for info about joining Club SOR
218.00
SOR Jump Seat Foams
SOR Photo
(click for large picture)

Anytime you reupholster your seats it's crucial to replace the old worn out foam or especially older models that used the horsehair type padding. New padding is a 'must do'. SOR's Upholstery Seat Covers are designed to fit tight with new updated foams. Technology is always moving forward allowing us to offer you a better quality replacement seat foam padding. SOR's Jump Seat Foams are manufactured from 2 inch Qualex commercial grade high resolution seat foam. Each formed piece is custom designed to fit for your application. Sold each.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
311-902A
SOR REAR BOTTOM JUMP SEAT FOAM-
Fits 9/73-4/78 FJ40 & BJ40 rear jump seat bottom-Manufactured from 2 inch Qualex commercial grade high resolution seat foam-Custom designed to fit your application-Sold each
On Sale - Everyone gets the Discounted Price on this part.
38.00
311-902B
SOR REAR BACK JUMP SEAT FOAM-
Fits 9/73-1984 FJ40 & BJ40 rear jump seat back-Manufactured from 2 inch Qualex commercial grade high resolution seat foam-Custom designed to fit your application-Sold each
On Sale - Everyone gets the Discounted Price on this part.
35.00
311-903A
SOR REAR BOTTOM JUMP SEAT FOAM-
Fits 4/78-1984 FJ40 & BJ40 rear jump seat bottom-Manufactured from 2 inch Qualex commercial grade high resolution seat foam-Custom designed to fit your application-Sold each - seat frame has fold down leg
On Sale - Everyone gets the Discounted Price on this part.
40.00
SOR 40 Series Deluxe Vinyl Non-USA Rear Jump Seat Covers
SOR Photo SOR Photo SOR Photo
(click for large picture)

Upgrade and renew your factory rear seats to look like new with SOR's Deluxe Vinyl Rear Non-USA Jump Seat Covers.

Buy
Quantity
Part Number
Description
Price
In Stock
Installation
Instructions
311-7943
SOR REAR DELUXE VINYL SEAT COVERS-
Fits 1976-1978 FJ40 & BJ40 NON-USA vehicles without roll bar, angle cut bottoms, with arm rests. Contoured to O.E.M. dimensions. Seat measurements are: Backrest are 30-1/4 inches wide by 11-1/2 inches high by 2-1/2 inches thick. Bottom seat dimensions are 33-1/4 inches on the backside, angle cut with 31-1/2 inches on the frontside, by 16 inches wide by 3 inches thick. Dark Charcoal Grey Marine Vinyl.Sewn with durable nylon thread, top stitched with matching welted seams. Sold in a pair.
Club Price with 15% Discount is $ 165.75 Click here for info about joining Club SOR
195.00

 

SOR Photo
Shown above, an over head view of the passenger side jump seat with the front end angled.
Metal Panel Hardware Kits

If you are restoring your Cruiser take the time to do the job all the way. After you remove the old seat covers, sand blast and repaint the frames, but before you install new padding and upholstery, don't forget the small details that really make the difference. Installing new hardware really finishes off the job. Now SOR has made it easy for you to purchase a kit that replaces the hardware for the rear metal panels on the factory jump seats. One kit does one jump seat

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
311-930A
REAR JUMP SEAT METAL PANEL HARDWARE KIT -
Fits 1965-1978 FJ40 rear jump seat - 35 piece set - Does 1 jump seat
Club Price with 15% Discount is $ 15.58 Click here for info about joining Club SOR
18.33
Replacement Jump Seat Straps, Bumpers and Twists
SOR Photo
(click for large picture)

Increase the value of your Land Cruiser and restore your interior to look like brand new. Don't forget the details that finish off the job and make the interior look like it did when it rolled off the production line. After you replace the upholstery and the seat foams, inspect and replace all the old worn parts. SOR stocks all the replacement parts you need to replace your straps, twists, bumpers, and hardware. You will be impressed with the results.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
311-940B-A
JUMP SEAT STRAPS-
AFTERMARKET-Fits 9/73-4/78 FJ40-For jump seats with rubber bump stops-Made of black nylon strapping-Approximate length eyelet to eyelet 8.75 inches-Sold in pairs
Club Price with 15% Discount is $ 23.22 Click here for info about joining Club SOR
27.32
311-950
REAR JUMP SEAT BUMPER-**Special Order NO Return
Fits 1958-4/78 FJ40-2 per side required
Club Price with 15% Discount is $ 8.08 Click here for info about joining Club SOR
Special Order NO Return
9.51
311-951A
1.68
311-952
JUMP SEAT BUMPER NUT WITH WASHER-
Fits 1958-4/78 FJ40
Club Price with 15% Discount is $ 0.62 Click here for info about joining Club SOR
0.73
311-955
2.00
311-956
OEM TWIST FASTENER -
comes w/nut and lock washer - sold each
On Sale - Everyone gets the Discounted Price on this part.
10.55
311-957
AFTERMARKET TWIST FASTENER -
comes w/flanged lock nut - sold each
Club Price with 15% Discount is $ 5.23 Click here for info about joining Club SOR
6.15

1979-1984

SOR 40 Series Deluxe Vinyl Rear Jump Seat Covers
SOR Photo
(click for large picture)

Upgrade and renew your factory rear seats to look like new with SOR's Deluxe Vinyl Rear Jump Seat Covers. These restoration quality seat covers are sewn to factory patterns using OEM dimensions. Made of high quality marine grade Naugahyde vinyl to match your factory interior. Sewn with durable nylon thread, top stitched with matching finished welted seams. SOR's Deluxe Vinyl Rear Jump Seat Covers are made to fit like a glove, tailored to fit your year and model. Manufactured by Specter so you know they fit! Available for all years, and models, even Non-USA Land Cruisers.

1958-1978 models are available in Dark Charcoal Gray Marine vinyl, and 1979-1984 models are available in Light Charcoal Gray Marine vinyl to match your factory interior. Seat covers are sold in complete sets for both rear jump seats, two bottoms and two backs. Remember, your upholstery will only be as good as the base you have to work with, most likely your foam is as old as the worn upholstery you are replacing. New foam padding will greatly improve the comfort and support of your ride. SOR's upholstery sets are designed to fit properly with new foams installed so the new seat covers have a snug, tailored fit. If you use your old worn foams the new seat covers may be loose. Be sure to read information on SOR's high density foam padding. So do the job right, replace the seat foams, paint the seat frames, paint the metal back panels and replace the hardware on the metal back panels. You will be impressed how nice your finished upholstered seats look. Increase the value of your Cruiser and restore your interior to look like brand new.

Color Matching Note Please click and read

 
Buy
Quantity
Part
Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
Installation
Instructions
311-7940-KIT
SOR REAR DELUXE VINYL SEAT COVER KIT-
Light Charcoal Grey Marine vinyl - Fits 1/79-1984 FJ40 Rear jump seats -21- 1/2 inches by 16 inches-Contoured to O.E.M. dimensions - Sewn with durable nylon thread, top stitched with matching welted seams. Kit includes 2 bottom seat covers, 2 back seat covers, 2 back foams, 2 bottom foams and tension wires.
Club Price with 15% Discount is $ 263.50 Click here for info about joining Club SOR
310.00
311-7940
SOR REAR DELUXE VINYL SEAT COVERS-
Light Charcoal Grey Marine vinyl-Fits 1979-1984 FJ40 & BJ40 rear jump seats-21 1/2 inches by 16 inches-Contoured to O.E.M. dimensions-Sewn with durable nylon thread, top stitched with matching welted seams-Designed to fit tight with new foams-4 piece set (2 bottom seat covers & 2 back seat covers for the rear jump seats)
Club Price with 15% Discount is $ 143.65 Click here for info about joining Club SOR
169.00
SOR Jump Seat Foams
SOR Photo
(click for large picture)

Anytime you reupholster your seats it's crucial to replace the old worn out foam or especially older models that used the horsehair type padding. New padding is a 'must do'. SOR's Upholstery Seat Covers are designed to fit tight with new updated foams. Technology is always moving forward allowing us to offer you a better quality replacement seat foam padding. SOR's Jump Seat Foams are manufactured from 2 inch Qualex commercial grade high resolution seat foam. Each formed piece is custom designed to fit for your application. Sold each.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
311-902A
SOR REAR BOTTOM JUMP SEAT FOAM-
Fits 9/73-4/78 FJ40 & BJ40 rear jump seat bottom-Manufactured from 2 inch Qualex commercial grade high resolution seat foam-Custom designed to fit your application-Sold each
On Sale - Everyone gets the Discounted Price on this part.
38.00
311-902B
SOR REAR BACK JUMP SEAT FOAM-
Fits 9/73-1984 FJ40 & BJ40 rear jump seat back-Manufactured from 2 inch Qualex commercial grade high resolution seat foam-Custom designed to fit your application-Sold each
On Sale - Everyone gets the Discounted Price on this part.
35.00
311-903A
SOR REAR BOTTOM JUMP SEAT FOAM-
Fits 4/78-1984 FJ40 & BJ40 rear jump seat bottom-Manufactured from 2 inch Qualex commercial grade high resolution seat foam-Custom designed to fit your application-Sold each - seat frame has fold down leg
On Sale - Everyone gets the Discounted Price on this part.
40.00
SOR 40 Series Deluxe Vinyl Non-USA Rear Jump Seat Covers
SOR Photo SOR Photo SOR Photo
(click for large picture)

Upgrade and renew your factory rear seats to look like new with SOR's Deluxe Vinyl Rear Non-USA Jump Seat Covers.

Buy
Quantity
Part Number
Description
Price
In Stock
Installation
Instructions
311-7944
SOR REAR DELUXE VINYL SEAT COVERS-
Fits 1979-1984 FJ40 & BJ40 NON-USA vehicles without roll bar, angle cut bottoms, with arm rests. Contoured to O.E.M. dimensions. Seat measurements are: Backrest are 30-1/4 inches wide by 11-1/2 inches high by 2-1/2 inches thick. Bottom seat dimensions are 33-1/4 inches on the backside, angle cut with 31-1/2 inches on the frontside, by 16 inches wide by 3 inches thick. Light Charcoal Grey Marine Vinyl.Sewn with durable nylon thread, top stitched with matching welted seams. Sold in a pair. Use #118-50B-A seat straps - order seperately.
Club Price with 15% Discount is $ 163.20 Click here for info about joining Club SOR
192.00

 

SOR Photo
Shown above, an over head view of the passenger side jump seat with the front end angled.
Metal Panel Hardware Kits

If you are restoring your Cruiser take the time to do the job all the way. After you remove the old seat covers, sand blast and repaint the frames, but before you install new padding and upholstery, don't forget the small details that really make the difference. Installing new hardware really finishes off the job. Now SOR has made it easy for you to purchase a kit that replaces the hardware for the rear metal panels on the factory jump seats. One kit does one jump seat

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
311-930B
REAR JUMP SEAT METAL PANEL HARDWARE KIT -
Fits 1979-1984 FJ40 rear jump seat - 25 piece set - Does 1 jump seat
Club Price with 15% Discount is $ 11.90 Click here for info about joining Club SOR
14.00
Replacement Jump Seat Straps, Bumpers and Twists
SOR Photo
(click for large picture)

Increase the value of your Land Cruiser and restore your interior to look like brand new. Don't forget the details that finish off the job and make the interior look like it did when it rolled off the production line. After you replace the upholstery and the seat foams, inspect and replace all the old worn parts. SOR stocks all the replacement parts you need to replace your straps, twists, bumpers, and hardware. You will be impressed with the results.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
311-940B-A
JUMP SEAT STRAPS-
AFTERMARKET-Fits 9/73-4/78 FJ40-For jump seats with rubber bump stops-Made of black nylon strapping-Approximate length eyelet to eyelet 8.75 inches-Sold in pairs
Club Price with 15% Discount is $ 23.22 Click here for info about joining Club SOR
27.32
311-940C-A
JUMP SEAT STRAPS-
AFTERMARKET-Fits 4/78-1984 FJ40-For jump seats with fold down legs-Made of black nylon strapping-Approximate length eyelet to eyelet 11 inches-Sold in pairs
Club Price with 15% Discount is $ 23.22 Click here for info about joining Club SOR
27.32
311-950
REAR JUMP SEAT BUMPER-**Special Order NO Return
Fits 1958-4/78 FJ40-2 per side required
Club Price with 15% Discount is $ 8.08 Click here for info about joining Club SOR
Special Order NO Return
9.51
311-951A
1.68
311-952
JUMP SEAT BUMPER NUT WITH WASHER-
Fits 1958-4/78 FJ40
Club Price with 15% Discount is $ 0.62 Click here for info about joining Club SOR
0.73
311-955
2.00
311-956
OEM TWIST FASTENER -
comes w/nut and lock washer - sold each
On Sale - Everyone gets the Discounted Price on this part.
10.55
311-957
AFTERMARKET TWIST FASTENER -
comes w/flanged lock nut - sold each
Club Price with 15% Discount is $ 5.23 Click here for info about joining Club SOR
6.15
Matching Texture and Color
Upholstery, Carpet and Seat Covers Fabrics, carpets, and colored materials used to manufacturer seat covers, carpet sets and other cosmetic items will vary in color from dye lot to dye lot. So for example, a gray seat cover made today will be a slightly different color and texture from a cover made from a different lot of material years ago from the same manufacturer. SOR recommends if you are interested in carpets, seat covers and other fabric items matching color and texture, that they be ordered at the same time so the items are made from the same dye lot of material. SOR can not be responsible for color and texture of items purchased at different times.
<< Top of Page >>

Specter Off-Road, Inc.

World's Largest Supplier of Land Cruiser Parts & Accessories. Providing Quality Parts Since 1983
© Copyright 1996 - Specter Off-Road, Inc. All rights reserved. Specter Off-Road, Inc. is not affiliated with Toyota Motor Sales or Toyota Motor Corporation.
TT=00:00:09 425 54.158.55.5

Contact SOR
Mailing Address: 21600 Nordhoff St. Chatsworth, California 91311 USA
Customer Entrance: 21601 Osborne St. (We're a city block long)
Phone: (818) 882-1238, Fax: (818) 882-7144, Email: sor@sor.com
Hours: Monday-Friday 8:00AM-6PM PST,
Closed Saturday & Sunday