0
 
You must Register and/or Login to save a shopping cart
You have 0 Items in your Cart Sub Total: $ 0.00
Providing Quality Parts to the Land Cruiser Community Since 1983
California Proposition 65 Notice
WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, cadmium and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to www.P65Warnings.ca.gov/passenger-vehicle.
Monthly Specials
FJ55 Glove Box Door
Starting at: $ 159.00

Search
<<  Browse Catalog  >>


...Featured Product...

Page 022 Land Cruiser Distributor 1958-8/92 - Std, Semi-Electronic & Electronic

<<< >>> 1958-8/92 Standard, Semi-Electronic & Electronic 8/92 & Later Electronic, Non-USA & Weather Caps
1958-8/92 Standard & Semi-Electronic Ignition

1958-9/73

Click the NUMBERS for part listings
Click on the BLUE HIGHLIGHTED NUMBERS in the line drawings to display a COMPLETE part listing of that part number.
Mechanical Ignition: FJ25, FJ40 & FJ55

 
Vacuum Advance Distributors
Join Club SOR and Save
Join ClubSOR & Save 20 %
Click to Join
Did you know that Toyota has been making high performance distributors for your Land Cruiser since 1958? Did you also know that Toyota makes a vacuum advance distributor that offers quality & performance that is second to none? Well now you know! Specter Off-Road offers the Vacuum Advance Distributor for those using the Non-USA & Aftermarket carburetors with ported vacuum. Don't run the risk of losing oil pressure due to a faulty distributor gear from those after market distributors. Go with a name you can count on - genuine Toyota parts and Specter Off-Road for your performance needs.

For 1958-7/80, these distributors also require the purchase of #022-06 updated clamp. For 9/71-8/87 vehicles you must also purchase #024-03A ignition coil.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
022-01A
OEM VACUUM ADVANCE DISTRIBUTOR -
Genuine Toyota Fits 1958-1975 - one piece points with two screws - must purchase updated clamp #022-06A - For 9/71-8/87 vehicles must purchase ignition coil with internal or external ballast resistor, order separately if needed
Club Price with 20% Discount is $ 353.39 Click here for info about joining Club SOR
441.74
022-06A
OEM DISTRIBUTOR CLAMP -
Fits 1958-7/80 - This is a genuine factory distributor clamp - This clamp keeps the distributor shaft down into the oil pump - SOR recommends replacing this clamp anytime you install a new distributor
Club Price with 20% Discount is $ 7.44 Click here for info about joining Club SOR
9.30
024-03A
IGNITION COIL WITH INTERNAL RESISTOR -
Fits 1958-9/71 & Fits 9/71-8/87 with vacuum advance distributor - Comes with coil bracket
(Discontinued - Not available at this time)
0.00
1958-1968 FJ40 Vacuum Advance Assembly

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
022-42-AA
VACUUM ADVANCE ASSEMBLY -
Fits 1958-1968
(Discontinued - Not available at this time)
0.00
Vacuum Ported Carburetor Base
SOR Photo
(click for large picture)

Do you have a 9/69 to a 12/74 carburetor and want to run a vacuum advance distributor for improved performance, but don't have a ported vacuum connection on your carburetor? SOR has the answer for you. This kit comes with a replacement throttle body that has a ported vacuum connection, Rebushed throttle shafts, and a carburetor rebuild kit. You simply swap your carburetor base for the one supplied in the kit and connect it directly to your vacuum advance distributor. If you have the original distributor in the vehicle you will have to replace it with the vacuum advance model see part number #022-01A.

Buy
Quantity
Part Number
Description
Price
*In Stock
042-62D-SOR
VACUUM PORTED CARBURETOR BASE -
Fits 9/69-12/74 - Replaces factory Non-Ported base.
On Sale - Everyone gets the Discounted Price on this part.
240.00

9/73-9/77

Click the NUMBERS for part listings
Click on the BLUE HIGHLIGHTED NUMBERS in the line drawings to display a COMPLETE part listing of that part number.
Semi Electronic Ignition: FJ40 & FJ55

 
Vacuum Advance Distributors
Join Club SOR and Save
Join ClubSOR & Save 20 %
Click to Join
Did you know that Toyota has been making high performance distributors for your Land Cruiser since 1958? Did you also know that Toyota makes a vacuum advance distributor that offers quality & performance that is second to none? Well now you know! Specter Off-Road offers the Vacuum Advance Distributor for those using the Non-USA & Aftermarket carburetors with ported vacuum. Don't run the risk of losing oil pressure due to a faulty distributor gear from those after market distributors. Go with a name you can count on - genuine Toyota parts and Specter Off-Road for your performance needs.

For 1958-7/80, these distributors also require the purchase of #022-06 updated clamp. For 9/71-8/87 vehicles you must also purchase #024-03A ignition coil.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
022-01A
OEM VACUUM ADVANCE DISTRIBUTOR -
Genuine Toyota Fits 1958-1975 - one piece points with two screws - must purchase updated clamp #022-06A - For 9/71-8/87 vehicles must purchase ignition coil with internal or external ballast resistor, order separately if needed
Club Price with 20% Discount is $ 353.39 Click here for info about joining Club SOR
441.74
022-01A-B
VACUUM ADVANCE DISTRIBUTOR-
Aftermarket-Fits 1975-8/87 - must purchase updated clamp #022-06, order separately if needed-For 9/71-8/87 vehicles must purchase ignition coil #024-03A, order separately if needed
Club Price with 20% Discount is $ 246.60 Click here for info about joining Club SOR
308.25
022-06A
OEM DISTRIBUTOR CLAMP -
Fits 1958-7/80 - This is a genuine factory distributor clamp - This clamp keeps the distributor shaft down into the oil pump - SOR recommends replacing this clamp anytime you install a new distributor
Club Price with 20% Discount is $ 7.44 Click here for info about joining Club SOR
9.30
024-03A
IGNITION COIL WITH INTERNAL RESISTOR -
Fits 1958-9/71 & Fits 9/71-8/87 with vacuum advance distributor - Comes with coil bracket
(Discontinued - Not available at this time)
0.00
Vacuum Ported Carburetor Base
SOR Photo
(click for large picture)

Do you have a 9/69 to a 12/74 carburetor and want to run a vacuum advance distributor for improved performance, but don't have a ported vacuum connection on your carburetor? SOR has the answer for you. This kit comes with a replacement throttle body that has a ported vacuum connection, Rebushed throttle shafts, and a carburetor rebuild kit. You simply swap your carburetor base for the one supplied in the kit and connect it directly to your vacuum advance distributor. If you have the original distributor in the vehicle you will have to replace it with the vacuum advance model see part number #022-01A.

Buy
Quantity
Part Number
Description
Price
*In Stock
042-62D-SOR
VACUUM PORTED CARBURETOR BASE -
Fits 9/69-12/74 - Replaces factory Non-Ported base.
On Sale - Everyone gets the Discounted Price on this part.
240.00

9/77-8/92

Click the NUMBERS for part listings
Click on the BLUE HIGHLIGHTED NUMBERS in the line drawings to display a COMPLETE part listing of that part number.
Electronic Ignition, FJ40, FJ55, FJ60 & FJ62
022-40 022-46 022-41 022-70 022-42 022-55 022-03 022-02 022-53 022-75 022-01

 
Rebuilt Distributor
Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
022-01I-R
REMANUFACTURED DISTRIBUTOR ASSEMBLY -
Fits 8/80-8/87 2F includes rebuilt vacuum advance unit. Order Cap 022-02E, Rotor 022-03C, and Cap O-Ring 022-55E separately.
On Sale - Everyone gets the Discounted Price on this part.
(a Refundable Core Charge of 150.00 is already included in price)
675.00
Signal Generator
Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
022-70A
SIGNAL GENERATOR -
Fits 9/77-7/80 FJ40/55
On Sale - Everyone gets the Discounted Price on this part.
100.97
Vacuum Advance Distributors
Join Club SOR and Save
Join ClubSOR & Save 20 %
Click to Join
Did you know that Toyota has been making high performance distributors for your Land Cruiser since 1958? Did you also know that Toyota makes a vacuum advance distributor that offers quality & performance that is second to none? Well now you know! Specter Off-Road offers the Vacuum Advance Distributor for those using the Non-USA & Aftermarket carburetors with ported vacuum. Don't run the risk of losing oil pressure due to a faulty distributor gear from those after market distributors. Go with a name you can count on - genuine Toyota parts and Specter Off-Road for your performance needs.

For 1958-7/80, these distributors also require the purchase of #022-06 updated clamp. For 9/71-8/87 vehicles you must also purchase #024-03A ignition coil.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
022-01A-B
VACUUM ADVANCE DISTRIBUTOR-
Aftermarket-Fits 1975-8/87 - must purchase updated clamp #022-06, order separately if needed-For 9/71-8/87 vehicles must purchase ignition coil #024-03A, order separately if needed
Club Price with 20% Discount is $ 246.60 Click here for info about joining Club SOR
308.25
022-06A
OEM DISTRIBUTOR CLAMP -
Fits 1958-7/80 - This is a genuine factory distributor clamp - This clamp keeps the distributor shaft down into the oil pump - SOR recommends replacing this clamp anytime you install a new distributor
Club Price with 20% Discount is $ 7.44 Click here for info about joining Club SOR
9.30
024-03A
IGNITION COIL WITH INTERNAL RESISTOR -
Fits 1958-9/71 & Fits 9/71-8/87 with vacuum advance distributor - Comes with coil bracket
(Discontinued - Not available at this time)
0.00
8/80-8/87 FJ40 and FJ60 Vacuum Advance Assembly

The distributor and vacuum advance assembly for the 8/80-8/87 FJ40 and FJ60 have long since been discontinued by Toyota. If you're cruiser is a gross polluter and cannot pass smog due to a worn vacuum advance assembly, SOR now stocks vacuum advance assemblies; an inexpensive way get your cruiser back on the road.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
022-42K
VACUUM ADVANCE ASSEMBLY -
Fits 8/80-8/87
(Discontinued - Not available at this time)
0.00
Tech Note
Tech Tip: Attention Weber Owners

If you have a Weber on your Land Cruiser and your old distributor is worn out, you should consider the Toyota Vacuum Advance Distributor. Since most Weber Carburetors have a connection for ported vacuum, they work well with the Vacuum Advance Distributor.

<< Top of Page >>

Specter Off-Road, Inc.

World's Largest Supplier of Land Cruiser Parts & Accessories. Providing Quality Parts Since 1983
© Copyright 1996 - Specter Off-Road, Inc. All rights reserved. Specter Off-Road, Inc. is not affiliated with Toyota Motor Sales or Toyota Motor Corporation.
TT=00:00:01 438 54.167.44.32

Contact SOR
Mailing Address: 21600 Nordhoff St. Chatsworth, California 91311 USA
Customer Entrance: 21601 Osborne St. (We're a city block long)
Phone: (818) 882-1238, Fax: (818) 882-7144, Email: sor@sor.com
Hours: Monday-Friday 8:00AM-6PM PST,
Closed Saturday & Sunday