0
 
You must Register and/or Login to save a shopping cart
You have 0 Items in your Cart Sub Total: $ 0.00
Providing Quality Parts to the Land Cruiser Community Since 1983
California Proposition 65 Notice
WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, cadmium and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to www.P65Warnings.ca.gov/passenger-vehicle.
Monthly Specials
FJ55 Glove Box Door
Starting at: $ 159.00

Search
<<  Browse Catalog  >>


...Featured Product...

Page 080 Land Cruiser Front Axle, Knuckle & Hub Assembly 40, 45, 55, 60 & 62 Series

<<< >>> 40, 55, 60 & 62 Series 70, 80 & 100 Series Locking Hubs Hub Caps & Rims
1968-1/90 40, 55, 60 & 62 Series

Knuckle & Hub Assemblies

Click the NUMBERS for part listings
Click on the BLUE HIGHLIGHTED NUMBERS in the line drawings to display a COMPLETE part listing of that part number.
Knuckle & Hub Assemblies


Locking Hub Assemblies

 
Hub Drive Flange
Highslide JS
(click for large picture)
Go Full Time 4 Wheel Drive
This is the original OEM Toyota specification, the way your vehicle was built. Tired of breaking and dealing with old worn out locking hubs? Install the original Toyota drive flanges. These are stronger than locking hubs.

1958-9/75 Early Cruiser with Coarse Spline Axles
Did you know the early Cruiser coarse spline locking hubs are discontinued and no longer available new. Used hubs are getting older and more expensive every day.

Make your rig the 4 wheel drive Toyota originally designed it to be.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
080-06A-KIT
FULL TIME 4 WHEEL DRIVE KIT -
Fits 1958-9/75 with coarse spline axles. Comes with hub flange, flange cap, hub gasket and snap ring. Hardware sold separately see 080-07A and 08a. Kit does one side.
Club Price with 15% Discount is $ 63.75 Click here for info about joining Club SOR
75.00
080-06B-KIT
FULL TIME 4 WHEEL DRIVE KIT -
Fits 9/75-1/79 with fine spline axles. Comes with hub flange, flange cap, hub gasket and snap ring. Hardware sold separately see 080-67-KIT, flange made to accept cone washers. Kit does one side.
Club Price with 15% Discount is $ 68.00 Click here for info about joining Club SOR
80.00

 
Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
080-06A
50.70
080-06A-KIT
FULL TIME 4 WHEEL DRIVE KIT -
Fits 1958-9/75 with coarse spline axles. Comes with hub flange, flange cap, hub gasket and snap ring. Hardware sold separately see 080-07A and 08a. Kit does one side.
Club Price with 15% Discount is $ 63.75 Click here for info about joining Club SOR
75.00
080-06A-U
U FAX FLANGE-
Fits 1958-7/75 USED
Club Price with 15% Discount is $ 29.75 Click here for info about joining Club SOR

PLEASE ALLOW 24 TO 72 HOURS TO PULL AND INSPECT ALL USED PARTS BEFORE SHIPMENT

35.00
080-06B
80.00
080-06B-KIT
FULL TIME 4 WHEEL DRIVE KIT -
Fits 9/75-1/79 with fine spline axles. Comes with hub flange, flange cap, hub gasket and snap ring. Hardware sold separately see 080-67-KIT, flange made to accept cone washers. Kit does one side.
Club Price with 15% Discount is $ 68.00 Click here for info about joining Club SOR
80.00
080-06B-U
U FAX FLANGE-
Fits 9/75-1/79 USED
Club Price with 15% Discount is $ 29.75 Click here for info about joining Club SOR

PLEASE ALLOW 24 TO 72 HOURS TO PULL AND INSPECT ALL USED PARTS BEFORE SHIPMENT

35.00
080-06C
FAX HUB FLANGE-
Fits 1/79-10/84
On Sale - Everyone gets the Discounted Price on this part.
89.85
080-06C-U
U FAX FLANGE-
Fits 1/79-10/84 USED
Club Price with 15% Discount is $ 40.80 Click here for info about joining Club SOR

PLEASE ALLOW 24 TO 72 HOURS TO PULL AND INSPECT ALL USED PARTS BEFORE SHIPMENT

48.00
080-06D
61.20
080-06D-U
U FAX FLANGE-
Fits 1/90-8/92 FJ80 USED
Club Price with 15% Discount is $ 39.95 Click here for info about joining Club SOR

PLEASE ALLOW 24 TO 72 HOURS TO PULL AND INSPECT ALL USED PARTS BEFORE SHIPMENT

47.00
080-06E
72.52
080-06E-U
U FAX FLANGE-
Fits 8/92-1/98 FJ80 USED
Club Price with 15% Discount is $ 39.95 Click here for info about joining Club SOR

PLEASE ALLOW 24 TO 72 HOURS TO PULL AND INSPECT ALL USED PARTS BEFORE SHIPMENT

47.00
080-06F
FAX HUB FLANGE-**Special Order NO Return
Fits 1/98-2007 UZJ100
Club Price with 15% Discount is $ 58.57 Click here for info about joining Club SOR
Special Order NO Return
68.90
080-06F-U
U FAX FLANGE-
Fits 1/98-2007 UZJ100 USED
(Not available at this time-Please call for availability)
45.00
Wheel Studs and Lug Nuts
Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
080-60A
WHEEL STUD -**Special Order NO Return
Fits 1958-7/80 - 36mm long - 6 required
Club Price with 15% Discount is $ 5.52 Click here for info about joining Club SOR
Special Order NO Return
6.49
080-60A-U
USED WHEEL STUD -
Fits 1958-7/80 - 36mm long - 6 required
Club Price with 15% Discount is $ 4.25 Click here for info about joining Club SOR

PLEASE ALLOW 24 TO 72 HOURS TO PULL AND INSPECT ALL USED PARTS BEFORE SHIPMENT

5.00
080-60AL
WHEEL STUD -**Special Order NO Return
Fits 1958-7/80 - 45mm long - for use with mag wheels - 6 required
Club Price with 15% Discount is $ 6.43 Click here for info about joining Club SOR
Special Order NO Return
7.56
080-60ALA
WHEEL STUD -
Fits 1958-7/80 - Aftermarket - 45mm long
On Sale - Everyone gets the Discounted Price on this part.
2.50
080-60ALA-KIT
WHEEL STUD & LUG NUT KIT -
1961-8/80 FJ40/FJ55/FJ45 - Kit contains quantity 6 cad coated wheel studs and quantity 6 cat coated lug nuts- Aftermarket.
On Sale - Everyone gets the Discounted Price on this part.
17.00
080-60ALA-U
U WHEEL STUD-
Fits 1958-7/80*45MMLONG USED
Club Price with 15% Discount is $ 1.62 Click here for info about joining Club SOR

PLEASE ALLOW 24 TO 72 HOURS TO PULL AND INSPECT ALL USED PARTS BEFORE SHIPMENT

1.90
080-60B-A
3.72
080-60B-KIT
WHEEL STUD & CHROME LUG NUT KIT -
8/80-8/87 FJ40/FJ60 - Kit contains quantity 6 wheel studs and quantity 6 chrome lug nuts- Aftermarket.
On Sale - Everyone gets the Discounted Price on this part.
17.00
080-60B-OEM
OEM*WHEEL STUD-**Special Order NO Return
Fits 8/80-8/87 FJ40/FJ60*OEM
Club Price with 15% Discount is $ 8.15 Click here for info about joining Club SOR
Special Order NO Return
9.59
080-60B-U
USED WHEEL STUD -
Fits 8/80-8/87 FJ40/FJ60
Club Price with 15% Discount is $ 4.25 Click here for info about joining Club SOR

PLEASE ALLOW 24 TO 72 HOURS TO PULL AND INSPECT ALL USED PARTS BEFORE SHIPMENT

5.00
080-60C
WHEEL STUD -**Special Order NO Return
Fits 8/87-1/90 FJ62
Club Price with 15% Discount is $ 8.15 Click here for info about joining Club SOR
Special Order NO Return
9.59
080-60C-A
3.72
080-60C-KIT
WHLSTUD&NUT KIT-
Fits 8/87-1/90 FJ62*KIT
On Sale - Everyone gets the Discounted Price on this part.
17.00
080-60D
4.39
080-60D-KIT
WHEEL STUD & LUG NUT KIT -
1/90-6/95 FJ80 - Kit contains quantity 6 cad coated wheel studs and quantity 6 cat coated lug nuts- Aftermarket.
Club Price with 15% Discount is $ 17.00 Click here for info about joining Club SOR
20.00
080-60E
2.94
080-60F
5.03
088-14A
3.16
088-14A-KIT
WHEEL STUD & LUG NUT KIT -
1961-8/80 FJ40/FJ55/FJ45 - Kit contains quantity 6 cad coated wheel studs and quantity 6 cad coated lug nuts - Aftermarket. NUTS DO NOT FIT "DEEP SOCKET" ALLOY WHEELS.
On Sale - Everyone gets the Discounted Price on this part.
17.00
088-14A-U
U STK LUG NUT-
Fits 1958-5/83 USED
Club Price with 15% Discount is $ 3.40 Click here for info about joining Club SOR

PLEASE ALLOW 24 TO 72 HOURS TO PULL AND INSPECT ALL USED PARTS BEFORE SHIPMENT

4.00
088-14B
OEM CHRM LUGNUT-**Special Order NO Return
Fits 5/83-1/90*OEM
Club Price with 15% Discount is $ 5.18 Click here for info about joining Club SOR
Special Order NO Return
6.09
088-14C
5.48
088-14D
STK LUG NUT-**Special Order NO Return
Fits 1/90-1/98 W/ALLOY WHEEL
Club Price with 15% Discount is $ 6.22 Click here for info about joining Club SOR
Special Order NO Return
7.32
088-14E
13.90
088-14F-A
STK LUG NUT-**Special Order NO Return
Fits 1/06-- FJ W/ALUM WHEEL
Club Price with 15% Discount is $ 5.86 Click here for info about joining Club SOR
Special Order NO Return
6.89
088-14F-S
STK LUG NUT-**Special Order NO Return
Fits 1/06-- FJ W/STEEL WHEEL
Club Price with 15% Discount is $ 7.51 Click here for info about joining Club SOR
Special Order NO Return
8.84
Hub Flange Stud/Cone Kit

Replacement Nut, Washer, Cone & Stud Kit for early 80 Series factory drive flange. This kit can be used on 80 Series Cruisers through 1998 but contains opened nut as opposed to cap or "acron nut". For cap nut, order #080-69A separately (Qty 6 per side, sold each).

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
080-67-KIT
AISIN HUB CONE KIT-
Fits 9/75-1/90 Aisin Hub-Comes with cone (qty 1), washer (qty 1), nut (qty 1), & stud (qty 1) - Does Not have Acorn Nut as found on 8/80-1/90 front hubs purchase 080-69A separately if desired.
On Sale - Everyone gets the Discounted Price on this part.
6.00
080-08B
FRONT AXLE HUB STUD-
Fits 9/75-1/98-For kit see #080-67-KIT Front Axle Cone Kit
Club Price with 15% Discount is $ 0.72 Click here for info about joining Club SOR
0.85
080-67
4.45
080-68
0.86
080-69A
OEM CAP (ACORN) NUT -
Fits 8/80-1/90 with Free Wheeling Hubs - qty 6 required per side.
Club Price with 15% Discount is $ 1.73 Click here for info about joining Club SOR
2.03
080-69B
2.96
Front Axle Repair Manual
Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
223-25
FRONT AXLE REPAIR MANUAL-
Fits disc brake models - Reprint 18 pages.
On Sale - Everyone gets the Discounted Price on this part.
10.00

Top of Page
Front Axle Nut & Washer Kit

Next time you service your wheel bearings, replace those screwdriver chiseled retainer nuts and worn out tab washers with new ones. Specter sells a kit that SAVES YOU MONEY over buying individual parts. The kit contains parts for one wheel; 2 adjusting nuts, 1 star tab washer and 1 tab washer. Purchase quantity 2 kits for a complete axle. Here is a good idea, put the money you save towards a new hub socket. You'll be able to properly preload the bearings and not leave chisel marks.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
080-03AA-KIT
FRONT AXLE NUT & WASHER KIT -
Fits 1958-9/75 - Comes with nut (qty 2), star tab (qty 1), and washer (qty 1)
Club Price with 15% Discount is $ 20.83 Click here for info about joining Club SOR
24.50
080-03BB-KIT
FRONT AXLE NUT & WASHER KIT -
Fits 9/75-1/98 - Comes with nut (qty 2), star tab (qty 1), and washer (qty 1)
On Sale - Everyone gets the Discounted Price on this part.
8.00
Knuckle Arm Stud Kit
Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
080-22A-KIT
FRONT AXLE KNUCKLE STUD KIT -
fits 1958-1/79 - set of 4 - Kit comes with quantity 4 each of #080-22 studs, #080-24 dowels, #080-25 washers, #080-26 nuts.
On Sale - Everyone gets the Discounted Price on this part.
44.18
080-22B-KIT
FRONT AXLE KNUCKLE STUD KIT -
Fits 1/79-1/90 - set of 4 - Kit comes with quantity 4 each of #080-22 studs, #080-24 dowels, #080-25 washers, #080-26 nuts.
On Sale - Everyone gets the Discounted Price on this part.
16.00

Top of Page

Knuckle Bearing, Shim, Gasket & Birfield Kits

Complete Shim, Gasket and Bearing Sets
The sets depicted below are for side-by-side comparison only. These kits vary by year and model. The photos below depict kits for a 1975 and later 40 Series with factory disc brakes. Click the part number links in each column to see kits models. Click the image for a larger view, click it again to reduce it.
Disc Brake
Bearing Kit
SOR Photo
Click Image

Part Numbers
9/75-1/90
#084-101B & C

1/90-1998
#084-101D & K
If you have disc brakes or have a disc brake conversion kit purchased from Specter Off-Road, this kit is complete. Kit includes gaskets, shims, seals, lock tabs, knuckle bearings, inner & outer wheel bearings for both sides.
These kits include gaskets for locking hubs but do not include hardware or "O" ring seal. See the Hub Seal Kit that matches the style of locking hub on your Land Cruiser.

If you have Warn hubs order part #333-7309

If you have Aisin (OEM) Hubs order part #080-89
Knuckle
Bearing Kit
SOR Photo
Click Image

Part Number
Comes with knuckle bearings, front wheel seals, birfield seals, lock tab washers, gaskets, shims & felts. Kit does both sides
These kits include gaskets for locking hubs but do not include hardware or "O" ring seal. See the Hub Seal Kit that matches the style of locking hub on your Land Cruiser.

If you have Warn hubs order part #333-7309

If you have Aisin (OEM) Hubs order part #080-89
Wheel
Bearing Kits
SOR Photo
Click Image

Part Number
For replacing front wheel bearings, includes inner and outer wheel bearings, wheel seals, lock tabs, and hub gaskets. Kit does both sides. Does not include hub gaskets
If you have Warn hubs order part #333-7309

If you have Aisin (OEM) Hubs order part #080-89
Warn Lock Hub
Seal & Gasket Set
SOR Photo
Click Image

Part Number
Fits Warn Locking Hubs
 
Aisin Lock Hub
Seal & Gasket Set
SOR Photo
Click Image

Part Number
Fits Factory OEM "Aisin" Locking Hubs
Shim &
Gasket Set
SOR Photo
Click Image

Part Number
The Shim & Gasket Kit contains just the shims and gaskets for both sides. Does not include locking hub gaskets.
If you have Warn hubs order part #333-7309

If you have Aisin (OEM) Hubs order part #080-89
Knuckle
Felt Kits
SOR Photo
Click Image

Part Number
Felt Kit
Kit does both sides
#080-61A-Kit Does both wheels, includes quantity 2 each of the outer knuckle seals, #080-61 and 2 each of the inner knuckle felts.

Front Axle
Seal Set
SOR Photo Kit does one side
#080-62. Kit does one side. Does not include metal flange. If your metal flange is damaged you will need to order part number 080-80A, Oil Seal Kit (kit does one side).
Birfield Seal
Replacement Kit
SOR Photo
Click Image

Part Number
This kit contains Birfield Seals, Spindle Gaskets, Wheel Seals, Loc Tabs, retainer Gaskets, and Hub Gaskets for both sides. Does not include gaskets for locking hubs.
If you have Warn hubs order part #333-7309

If you have Aisin (OEM) Hubs order part #080-89
Specter also suggests the purchase of a Hub Socket part #200-12 and Front Axle Maintenance Manual #223-25
Bearing Brands in Bearing Kits from SOR

Specter Off-Road only uses top quality automotive bearings in our kits that meet or exceed the original factory manufacturing specifications. You will find only quality bearings from American, Japanese or European manufacturers at Specter Off-Road.

We here at SOR have noticed a number of less expensive bearings showing up in the Land Cruiser marketplace. Several bearings we have inspected are much lower quality than the original equipment Toyota bearing. Insist on high quality replacement bearings for your Cruiser.

Knuckle Felt Kit

Kit includes quantity 2 each of the outer knuckle seals, #080-61 and 2 each of the inner knuckle felts, #080-62. Does not include metal flange. If your metal flange is damaged you will need to order part number 080-80A, Oil Seal Kit.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
080-61A-KIT
FRONT KNUCKLE SEAL KIT -
Fits 1958-1/90 - Kit includes 2 each #080-61A seal and 2 each #080-62A seal - does both sides. If you have Warn hubs order kit #333-7309. If you have Aisin (OEM) Hubs order kit #080-89.
On Sale - Everyone gets the Discounted Price on this part.
16.00
080-80A
FRONT AXLE OIL SEAL SET -
Fits 1958-1/90 (1 SIDE). Purchase Locking hub kit separately. If you have Warn hubs order part #333-7309. If you have Aisin (OEM) Hubs order part #080-89
Club Price with 15% Discount is $ 17.52 Click here for info about joining Club SOR
20.61
Knuckle Bearing Kit

Up until 1998 the Land Cruiser used a straight axle (or live axle) closed knuckle. The knuckle pivots left to right, using knuckle bearings, one top and one bottom per side. With the use of larger tires and rims the knuckle bearing (AKA trunnion bearing, king pin bearing) takes a lot of pounding abuse. Most of the wear to the bearing occurs in the straight line position. Rotating knuckle left to right and the knuckle wants to return to center every time is a sign of bearing wear.

Always refer to your factory Chassis Body Manual for procedures see page 221. Part #200-12 hub socket is a great tool to have to achieve proper torque specs.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
080-400A
KNUCKLE BEARING KIT -
Fits 1958-9/75 - Comes with knuckle bearings (qty 4), front wheel seals (qty 2), birfield seals (qty 2), lock tab washers (qty 2), gaskets, shims & felts - Does both sides - (1958-1967 Models also need to order #080-70A-L and #080-70A-R inner bushings separately). Purchase Locking Hub Kit separate. If you have Warn hubs order part #333-7309. If you have Aisin (OEM) Hubs and need the hub O ring seal, order part #080-89.
On Sale - Everyone gets the Discounted Price on this part.
99.00
080-400B
KNUCKLE BEARING KIT -
Fits 9/75-1/79-Comes with knuckle bearings (qty 4), front wheel seals (qty 2), birfield seals (qty 2), lock tab washers (qty 2), gaskets, shims, & felts-Does both sides Purchase Locking Hub Kit separate. If you have Warn hubs order part #333-7309. If you have Aisin (OEM) Hubs and need the hub O ring seal, order part #080-89.
On Sale - Everyone gets the Discounted Price on this part.
99.00
080-400C
KNUCKLE BEARING KIT -
Fits 1/79-1/90 40/60/62 and 70 Series Land Cruiser-Comes with knuckle bearings (qty 4), front wheel seals (qty 2), birfield seals (qty 2), lock tab washers (qty 2), gaskets, shims, & felts-Does both sides. Purchase Locking Hub Kit separate. If you have Warn hubs order part #333-7309. If you have Aisin (OEM) Hubs and need the hub O ring seal, order part #080-89.
On Sale - Everyone gets the Discounted Price on this part.
99.00
080-400D
KNUCKLE BEARING KIT -
Fits 1/90-1/98 FJ80 & FZJ80 - Comes with knuckle bearings (qty 4), front wheel seals (qty 2), birfield seals (qty 2), lock tab washers (qty 2), gaskets, & felts. Kit does both sides
On Sale - Everyone gets the Discounted Price on this part.
110.00
080-400K
KNUCKLE BEARING KIT -
Fits 1/90 -1/98 70 Series-Comes with knuckle bearings (qty 4), front wheel seals (qty 2), birfield seals (qty 2), lock tab washers (qty 2), gaskets, shims, & felts-Does both sides
On Sale - Everyone gets the Discounted Price on this part.
129.00
080-400M
KNUCKLE BEARING KIT -
Fits 1/98 & Later NON-USA HDJ 78, 79 and 100. Comes with knuckle bearings (qty 4), birfield seals (qty 2), lock tab washers (qty 2), needle bearings for spindle (qty 2), spindle bushings (qty 2), gaskets, shims, felts and retainers - Does both sides
Club Price with 15% Discount is $ 212.50 Click here for info about joining Club SOR
250.00

Top of Page
Disc Brake Bearing Kit

If you have disc brakes or have a disc brake conversion kit that you purchased from Specter Off-Road, we now offer a complete new Disc Brake Bearing Replacment Kit. Kit includes gaskets, shims, seals, lock tabs, knuckle bearings, inner & outer hub wheel bearings for both sides.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
084-101A
DISC BRAKE BEARING KIT -
Fits 7/70-9/75 FJ40/55 with the SOR disc brake conversion - Includes gaskets, shims, Birfield seals, spindle bushings. nuts & washers, lock tabs, hub gaskets, knuckle bearings, inner & outer wheel bearings and wheel seals - Does both sides. Purchase Locking Hub Kit separate. If you have Warn hubs order part #333-7309. If you have Aisin (OEM) Hubs and need the hub O ring seal, order part #080-89.
On Sale - Everyone gets the Discounted Price on this part.
200.00
084-101B
DISC BRAKE BEARING KIT -
Fits 9/75-1/79 FJ40 & FJ55 - Includes gaskets, shims, Birfield seals, lock tabs, knuckle bearings, inner & outer hub wheel bearings and wheel seals - Does both sides. Purchase Locking Hub Kit separate. If you have Warn hubs order part #333-7309. If you have Aisin (OEM) Hubs and need the hub O ring seal, order part #080-89.
On Sale - Everyone gets the Discounted Price on this part.
213.00
084-101C
DISC BRAKE BEARING KIT -
Fits 1/79-1/90 FJ40, FJ60, & FJ62 - Includes gaskets, shims, Birfield seals, spindle bushings, nuts & washers, lock tabs, hub gaskets, knuckle bearings, inner & outer wheel bearings and wheel seals - Does both sides. Purchase Locking Hub Kit separate. If you have Warn hubs order part #333-7309. If you have Aisin (OEM) Hubs and need the hub O ring seal, order part #080-89.
On Sale - Everyone gets the Discounted Price on this part.
200.00
Front Wheel Bearing Kits

If you are replacing your front wheel bearings, you can now order inner and outer wheel bearings, wheel seals, lock tabs, and hub gaskets using one part number only. One kit does both sides.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
080-01A-KIT
FRONT WHEEL BEARING KIT-
Fits 1958-9/75-Comes with inner & outer wheel bearings, wheel seals, lock tabs, & hub gaskets-Does both sides. Purchase Locking Hub Kit separate. If you have Warn hubs order part #333-7309. If you have Aisin (OEM) Hubs order part #080-89.
Club Price with 15% Discount is $ 190.95 Click here for info about joining Club SOR
224.65
080-01B-KIT
FRONT WHEEL BEARING KIT-
Fits 9/75-1/90-Comes with inner & outer wheel bearings, wheel seals, lock tabs, & hub gaskets-Does both sides - Also order qty 2 #080-85 OEM outer hub gasket separately. Purchase Locking Hub Kit separate. If you have Warn hubs order part #333-7309. If you have Aisin (OEM) Hubs order part #080-89.
Club Price with 15% Discount is $ 140.92 Click here for info about joining Club SOR
165.79

Top of Page
Shim & Gasket Sets
Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
080-40A
SHIM & GASKET SET -
Fits 1958-9/75 - Comes with shims & gaskets - Does both sides. If you have Warn hubs order part #333-7309 or Aisin (OEM) Hubs, order part #080-89. Order 2 x wheel seals 080-35A and 2 x Birfield seals 080-59A, if needed.
Club Price with 15% Discount is $ 45.05 Click here for info about joining Club SOR
53.00
080-40B
SHIM & GASKET SET -
Fits 9/75-1/79 - Comes with shims & gaskets-Does both sides. If you have Warn hubs order part #333-7309 or Aisin (OEM) Hubs part #080-89. Order 2 x wheel seals 080-35B and 2 x Birfield seals 080-59A, if needed.
Club Price with 15% Discount is $ 95.07 Click here for info about joining Club SOR
111.85
080-40C
SHIM & GASKET SET -
Fits 1/79-1/90 - Comes with shims & gaskets - Does both sides. If you have Warn hubs order part #333-7309 or Aisin (OEM) Hubs part #080-89. Order 2 x wheel seals 080-35B and 2 x Birfield seals 080-59A, if needed.
Club Price with 15% Discount is $ 40.31 Click here for info about joining Club SOR
47.42
080-40L
MINOR SHIM & GASKET SET -
Fits 11/84 - 1/90 FJ70 and BJ70 Series-Comes with shims & gaskets-Does both sides.Purchase Locking Hub Kit separate. If you have Warn hubs order part #333-7309. If you have Aisin (OEM) Hubs order part #080-89.
Club Price with 15% Discount is $ 40.31 Click here for info about joining Club SOR
47.42
Birfield Seal Replacement Kit

Does your 1968-1998 front axles have deposits of gooey grease on the inside of the front knuckles? These deposits are generally caused by worn out Birfield Seals. If the seals are not replaced, the thin grease will migrate into the brake drum or onto the rotor, causing premature brake and possible wheel bearing failure. Specter now offers you the convenience of a kit with the minimum gaskets and seals necessary to replace both of the Birfield Seals on your front axle.

This kit contains Birfield Seals (qty 2), Spindle Gaskets (qty 2), Wheel Seals (qty 2), Loc Tabs (qty 2), retainer Gaskets (qty 2), and Hub Gaskets (qty 2). The wheel seals are included so you can inspect and repack the inner wheel bearings.

If you need new bearings order these separately #080-01 and #080-34.

For Warn Hub service kit #333-7309, or for Factory Hub gasket see #080-85.

To achieve proper torque specs, Specter also suggests the purchase of a Hub Socket part #200-12 and Front Axle Maintenance Manual #223-25.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
080-590A
BIRFIELD SEAL REPLACEMENT KIT-
Fits 1968-9/75 (1958-1975 Land Cruisers did not come with O.E.M. hubs)-Comes with birfield seal (qty 2), spindle gasket (qty 2), wheel seal (qty 2), star tab (qty 2), FAX retainer gasket (qty 2), & hub gasket (qty 2)-Does both sides-For Warn hub service kit see #333-7309
Club Price with 15% Discount is $ 22.58 Click here for info about joining Club SOR
26.56
080-590B
BIRFIELD SEAL REPLACEMENT KIT-
Fits 9/75-1/90-Comes with birfield seal (qty 2), spindle gasket (qty 2), wheel seal (qty 2), star tab (qty 2), FAX retainer gasket (qty 2), & hub gasket (qty 2)-Does both sides-For Warn hub service kit see #333-7309
Club Price with 15% Discount is $ 25.42 Click here for info about joining Club SOR
29.90

Top of Page
Aisin OEM Hub Service Kit

Kit includes gaskets and O-ring seals. One kit does both hubs. Remember to service your Aisin hubs when you repack your wheel bearings.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
080-89
AISIN HUB SERVICE KIT -
Fits 9/75-1/90 OEM Aisin locking Hubs - Comes with gaskets and hub rings - One kit does both hubs.
Club Price with 15% Discount is $ 15.77 Click here for info about joining Club SOR
18.55
Warb Hub Service Kit"
SOR Photo
(click for large picture)
SOR Photo
(click for large picture)

Warn Hub Service Kits come with everything you need to service your Warn Hubs. Kit includes gaskets, lock washers, and allen head bolts. One kit does both hubs. Remember to service your Warn hubs when you repack your wheel bearings. Early M47 Warn Hub Kits are not available, use hub gasket #080-05 (qty 4).

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
333-7309
HUB SERVICE KIT-
Fits #333-193 & #333-239 Warn Locking Hubs-Comes with gaskets, lock washers, & allen head bolts-One kit does both hubs
Club Price with 15% Discount is $ 20.40 Click here for info about joining Club SOR
24.00
333-7310
HUB SERVICE GASKET-
Fits #333-193 & #333-239 Warn Locking Hubs-Sold each
Club Price with 15% Discount is $ 1.50 Click here for info about joining Club SOR
1.76
080-05A
KEVLAR FRONT AXLE HUB GASKET -
Fits 1958-1/90
On Sale - Everyone gets the Discounted Price on this part.
2.00

Top of Page

Axle & Axle Housing

Click the NUMBERS for part listings
Click on the BLUE HIGHLIGHTED NUMBERS in the line drawings to display a COMPLETE part listing of that part number.

Front Axle Nut & Washer Kit

Next time you service your wheel bearings, replace those screwdriver chiseled retainer nuts and worn out tab washers with new ones. Specter sells a kit that SAVES YOU MONEY over buying individual parts. The kit contains parts for one wheel; 2 adjusting nuts, 1 star tab washer and 1 tab washer. Purchase quantity 2 kits for a complete axle. Here is a good idea, put the money you save towards a new hub socket. You'll be able to properly preload the bearings and not leave chisel marks.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
080-03AA-KIT
FRONT AXLE NUT & WASHER KIT -
Fits 1958-9/75 - Comes with nut (qty 2), star tab (qty 1), and washer (qty 1)
Club Price with 15% Discount is $ 20.83 Click here for info about joining Club SOR
24.50
080-03BB-KIT
FRONT AXLE NUT & WASHER KIT -
Fits 9/75-1/98 - Comes with nut (qty 2), star tab (qty 1), and washer (qty 1)
On Sale - Everyone gets the Discounted Price on this part.
8.00
Aisin OEM Hub Service Kit

Kit includes gaskets and O-ring seals. One kit does both hubs. Remember to service your Aisin hubs when you repack your wheel bearings.

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
080-89
AISIN HUB SERVICE KIT -
Fits 9/75-1/90 OEM Aisin locking Hubs - Comes with gaskets and hub rings - One kit does both hubs.
Club Price with 15% Discount is $ 15.77 Click here for info about joining Club SOR
18.55
Warb Hub Service Kit"
SOR Photo
(click for large picture)
SOR Photo
(click for large picture)

Warn Hub Service Kits come with everything you need to service your Warn Hubs. Kit includes gaskets, lock washers, and allen head bolts. One kit does both hubs. Remember to service your Warn hubs when you repack your wheel bearings. Early M47 Warn Hub Kits are not available, use hub gasket #080-05 (qty 4).

Buy
Quantity
Part Number
Description
Price
In Stock
Picture
(Click to Enlarge & Close)
333-7309
HUB SERVICE KIT-
Fits #333-193 & #333-239 Warn Locking Hubs-Comes with gaskets, lock washers, & allen head bolts-One kit does both hubs
Club Price with 15% Discount is $ 20.40 Click here for info about joining Club SOR
24.00
333-7310
HUB SERVICE GASKET-
Fits #333-193 & #333-239 Warn Locking Hubs-Sold each
Club Price with 15% Discount is $ 1.50 Click here for info about joining Club SOR
1.76
080-05A
KEVLAR FRONT AXLE HUB GASKET -
Fits 1958-1/90
On Sale - Everyone gets the Discounted Price on this part.
2.00

Top of Page
Tech Note
Tech Note: Worn Knuckle Bearings
SOR Photo
New Knuckle Bearing Race
(click for large picture)
SOR Photo
Worn Knuckle Bearing Race
(click for large picture)

Up until 1998 the Land Cruiser used a straight front axle (or live axle) with closed steering knuckles. Each knuckle pivots side to side on knuckle bearings, also known as trunnion or king pin bearings. One top and one bottom of each steering knuckle. Knuckle bearings carry a large percent of the vehicle load - the bearings take a lot of abuse. Bearing wear occurs in the straight line position (see photo). Grooves wear into the bearing race and steering is no longer precise. To check for wear, put the front of the vehicle on jack stands and slowly turn the steering wheel side to side. If the wheels want to return to center or feel like they're clicking into detents, it is likely your bearings are worn. Another sign of wear would be loose knuckle arms.

Specter Off-Road sells a complete kit to correct this problem. The kit contains seals, knuckle bearings, gaskets and shims depending on model. The kit contains parts to do both steering knuckles. See part listing #080-400 If your bearings are in good shape but you are just servicing your knuckle and wheels bearings, SOR sells seal kits. The kits contain seals, shims and gaskets in one package to ensure you get what you need to complete the job. See part numbers #080-40 and #080-41. We also recommend consulting your service manual for procedures, torque settings and bearing load settings. To purchase a service manual, see pages 220, 221 and 223 The knuckle bearing kits do not contain wheel bearings.

While you're in there: If you are overhauling your steering knuckles, you will be disassembling the entire hub and knuckle and breaking free the tie rod ends. You may want to consider replacing your wheel bearings and brake pads. See part number 080-34 and 080-01 for inner and outer wheel bearings and page 081 for pads and shoes. You will run the risk of damaging tie rod boots so you may want purchase replacement boots (see page 094).

Bearing Brands in Bearing Kits from SOR

Specter Off-Road only uses top quality automotive bearings in our kits that meet or exceed the original factory manufacturing specifications. You will find only quality bearings from American, Japanese or European manufacturers at Specter Off-Road.

We here at SOR have noticed a number of less expensive bearings showing up in the Land Cruiser marketplace. Several bearings we have inspected are much lower quality than the original equipment Toyota bearing. Insist on high quality replacement bearings for your Cruiser.

<< Top of Page >>

Specter Off-Road, Inc.

World's Largest Supplier of Land Cruiser Parts & Accessories. Providing Quality Parts Since 1983
© Copyright 1996 - Specter Off-Road, Inc. All rights reserved. Specter Off-Road, Inc. is not affiliated with Toyota Motor Sales or Toyota Motor Corporation.
TT=00:00:07 1974 54.162.154.91

Contact SOR
Mailing Address: 21600 Nordhoff St. Chatsworth, California 91311 USA
Customer Entrance: 21601 Osborne St. (We're a city block long)
Phone: (818) 882-1238, Fax: (818) 882-7144, Email: sor@sor.com
Hours: Monday-Friday 8:00AM-6PM PST,
Closed Saturday & Sunday