Specter Off-Road Land Cruiser Parts - Page 245 Land Cruiser Cage Kits

Page 245 — Land Cruiser Cage Kits


	SOR Family Cage Assembly

SOR Family Cage Assembly
Complete SOR
Family Cage Assmebly
(Click for a larger view)

SOR Family Cage
Assmebly with SOR Pad
Kit (Click for a larger view)

Specter is proud to offer a full length cage for your 40 Series Land Cruiser. Shown here in the picture is a combination of three different part numbers, SOR Sport Bar (#244-80), SOR Front Cage Kit (#245-80), and the SOR Rear Family Cage Kit (#245-86). All these cage components are made from 2 inch diameter .120 wall tubing. All these parts are UPS shippable. Tubes may require trimming to length. Drilling and welding required for installation. Remember to test fit cage components prior to final installation.

#244-80 SOR Sportbar The FJ40 Sportbar is designed with the ability to be UPS shippable. It comes in four pre-cut pieces ready to be welded into your FJ40. Hardware is included. Shipping weight 55 lbs. Welding, drilling and tube trimming required. Remember to test fit cage components prior to final installation. 1974-1984 does not use stock mounting holes. Made from 2 inch diameter .120 wall tubing.
#245-80 SOR Front Cage Kit This Front Cage Kit is designed with the ability to be UPS shippable. It comes in five pre-cut pieces ready to be welded into your FJ40. All hardware is included. Welding, drilling and tube trimming is required. Remember to test fit cage components prior to final installation. Shipping weight is 55 lbs. Made from 2 inch diameter .120 wall tubing.
#245-86 SOR Rear Family Cage Kit Specter now offers a kit to extend the full height roll bar to the rear of your 40 Series. This UPS shippable kit contains four pre-cut pieces ready to be welded together. Rear hoop is specially designed to fit inside softops. Comes with two spreader bars, mounting plates and mounting hardware. Requires drilling and welding to install. Remember to test fit cage components prior to final installation. Shipping weight is 55 lbs. Made from 2 inch diameter .120 wall tubing.
#245-81 SOR Front Cage Pad Kit & #245-87 SOR Rear Cage Pad Kit Specter makes padding kits for SOR’s Cage Kit! This is truly the best fitting padding kit on the market today. The pads fit like a glove, they are tailored for a nice fit over the curves of your SOR bars. Kits come complete with enough padding and a full set of pad covers to cover the entire bar. Made of durable Tuff Duck vinyl material. These kits are designed to fit a roll bar and cage kit installed in such a fashion as to fit under the original hardtop. Available in Tuff Duck material in Black vinyl (BL), Grey vinyl (GY), Tan vinyl (TN), and Olive Drab vinyl (OD).

[ UPS ]

Buy

Part Number

Description

Price

*In Stock

Installation Instructions
(click on icon)

244-80
SOR 40 Series Sportbar-
Fits 40 Series 1958-1984(1975-1984 does NOT use stock mounting holes)-4 pre-cut pieces-Welding, drilling, & tube trimming required-Comes with installation hardware-Remember to test fit cage components prior to final installation-UPSable-Shipping weight = 55 lbs. (approximate) If you have factory rear jump seats, please see seat bracket kits #246-10 for installation, order seperately if needed. - Club Price is $ 295.20 Click here for info about Club SOR (An Additional Handling Charge of $30.00 is already included in price)
$342.00

Yes

245-80
SOR Front 40 Series Cage Kit-
Fits 1958-1984 FJ40-5 pre-cut pieces-Welding, drilling, & tube trimming required-Comes with installation hardware-Remember to test fit cage components prior to final installation-UPSable-Shipping weight = 55 lbs. (approximate) - Club Price is $ 259.50 Click here for info about Club SOR (An Additional Handling Charge of $30.00 is already included in price)
$300.00

Yes

245-86
SOR Rear Family Cage Kit*Special Order NO Return-
Fits 40 Series-4 pre-cut pieces-Welding & drilling required-Comes with installation hardware-Remember to test fit cage components prior to final installation-UPSable-Shipping weight = 55 lbs. (approximate)-Availability subject to stock on hand - Club Price is $ 242.50 Click here for info about Club SOR (Special Order-not in stock-NO RETURN) (An Additional Handling Charge of $30.00 is already included in price)
$280.00

No


	SOR Front 40 Series Cage Kit

SOR Front 40 Series Cage Kit

This Front Cage Kit is designed with the ability to be UPS shippable. It comes in five pre-cut pieces ready to be welded into your FJ40. All hardware is included. Welding, drilling and tube trimming is required. Remember to test fit cage components prior to final installation. Shipping weight is 55 lbs. Made from 2 inch diameter .120 wall tubing.

[ UPS ]

Buy

Part Number

Description

Price

*In Stock

Installation Instructions
(click on icon)

245-80
SOR Front 40 Series Cage Kit-
Fits 1958-1984 FJ40-5 pre-cut pieces-Welding, drilling, & tube trimming required-Comes with installation hardware-Remember to test fit cage components prior to final installation-UPSable-Shipping weight = 55 lbs. (approximate) - Club Price is $ 259.50 Click here for info about Club SOR (An Additional Handling Charge of $30.00 is already included in price)
$300.00

Yes

Buy

Part Number

Description

Price

*In Stock

Picture
(click to enlarge & close)

245-80-HW
Hardware Kit -
fits #245-80 40 Series Front Cage Kit - Replacement hardware. - Club Price is $ 10.20 Click here for info about Club SOR

$12.00

Yes

SOR Front 40 Series Cage Kit

SOR Front Cage Pad Kit

SOR Front Cage Pad Kit
Shown here with #244-82-T
(click for large picture)

#245-81-T Is Highlighted
(click for large picture)

#245-81-TOD
(click for large picture)

#245-81-TOD
(click for large picture)

#245-81-TOD
(click for large picture)

SOR Front Cage Pad Kit
#245-81-TOD
(click for large picture)

Joint
(click for large picture)

Joint
(click for large picture)

Specter makes padding kits for SOR’s Front Cage Kit! This is truly the best fitting padding kit on the market today. The pads fit like a glove, they are tailored for a nice fit over the curves of your SOR bars. Kits come complete with enough padding and a full set of pad covers to cover the entire bar. Made of durable Tuff Duck vinyl material. These kits are designed to fit a roll bar and cage kit installed in such a fashion as to fit under the original hardtop.

Available in Tuff Duck material in Black vinyl (BL), Grey vinyl (GY), Tan vinyl (TN), and Olive Drab vinyl (OD).

Exclusive Part Made In USA [ Pit Bull Tested ]

Buy

Part Number

Description

Price

*In Stock

Picture
(click for large picture)

Installation Instructions
(click on icon)

245-81-TBL
SOR Front Cage Pad Kit-
Black Tuff Duck Vinyl-Fits 1958-1984 FJ40 & BJ40 SOR Front Cage Kit-Comes with Tube Bar Padding and a full set of S-O-R Tube Bar Pad Covers to cover the entire bar - Club Price is $ 120.70 Click here for info about Club SOR
$142.00

Yes

SOR Front Cage Pad Kit

245-81-TGY
SOR Front Cage Roll Bar Pad Kit-
Grey Tuff Duck Vinyl-Fits 1958-1984 FJ40 & BJ40 SOR Front Cage Kit-Comes with Tube Bar Padding and a full set of S-O-R Tube Bar Pad Covers to cover the entire bar - Club Price is $ 120.70 Click here for info about Club SOR
$142.00

Yes

SOR Front Cage Pad Kit

245-81-TOD
SOR Front Cage Roll Bar Pad Kit-
Olive Drab Tuff Duck Vinyl-Fits 1958-1984 FJ40 & BJ40 SOR Front Cage Kit-Comes with Tube Bar Padding and a full set of S-O-R Tube Bar Pad Covers to cover the entire bar - Club Price is $ 102.00 Click here for info about Club SOR
$120.00

Yes

SOR Front Cage Pad Kit

245-81-TTN
SOR Front Cage Roll Bar Pad Kit-
Tan Tuff Duck Vinyl-Fits 1958-1984 FJ40 & BJ40 SOR Front Cage Kit-Comes with Tube Bar Padding and a full set of S-O-R Tube Bar Pad Covers to cover the entire bar - Club Price is $ 110.50 Click here for info about Club SOR
$130.00

Yes

SOR Front Cage Pad Kit


	Spreader Bar

Spreader Bar

Spreader Bar is 40 inches long with one mitered end.

Buy

Part Number

Description

Price

*In Stock

245-85
Spreader Bar-
40 inches long with one mitered end - Club Price is $ 20.66 Click here for info about Club SOR
$24.30

Yes


	SOR 40 Series Rear Family Cage Kit

SOR 40 Series Rear Family Cage Kit

Joint Fit
(click for large picture)

Specter now offers a kit to extend the full height roll bar to the rear of your 40 Series. This UPS shippable kit contains four pre-cut pieces ready to be welded together. Rear hoop is specially designed to fit inside softops. Comes with two spreader bars, mounting plates and mounting hardware. Requires drilling and welding to install. Remember to test fit cage components prior to final installation. Shipping weight is 55 lbs. Made from 2 inch diameter .120 wall tubing.

[ UPS ]

Buy

Part Number

Description

Price

*In Stock

Installation Instructions
(click on icon)

245-86
SOR Rear Family Cage Kit*Special Order NO Return-
Fits 40 Series-4 pre-cut pieces-Welding & drilling required-Comes with installation hardware-Remember to test fit cage components prior to final installation-UPSable-Shipping weight = 55 lbs. (approximate)-Availability subject to stock on hand - Club Price is $ 242.50 Click here for info about Club SOR (Special Order-not in stock-NO RETURN) (An Additional Handling Charge of $30.00 is already included in price)
$280.00

No

Buy

Part Number

Description

Price

*In Stock

Picture
(click to enlarge & close)

245-86-HW
HARDWARE KIT-
FITS #245-86RRFAMILYCAGE - Club Price is $ 10.20 Click here for info about Club SOR

$12.00

Yes

SOR 40 Series Rear Family Cage Kit

SOR Rear Cage Pad Kit

SOR Rear Cage Pad Kit
#245-87-T Is Highlighted
(click for large picture)

#245-87-T
(click for large picture)

#245-87-T
(click for large picture)

Joint
(click for large picture)

Joint
(click for large picture)

SOR Rear Cage Pad Kit
Joint
(click for large picture)

Specter makes padding kits for SOR’s Rear Cage Kit! This is truly the best fitting padding kit on the market today. The pads fit like a glove, they are tailored for a nice fit over the curves of your SOR bars. Kits come complete with enough padding and a full set of pad covers to cover the entire bar. Made of durable Tuff Duck vinyl material. These kits are designed to fit a roll bar and cage kit installed in such a fashion as to fit under the original hardtop.

Available in Tuff Duck material in Black vinyl (BL), Grey vinyl (GY), Tan vinyl (TN), and Olive Drab vinyl (OD).

Exclusive Part Made In USA [ Pit Bull Tested ]

Buy

Part Number

Description

Price

*In Stock

Picture
(click for large picture)

Installation Instructions
(click on icon)

245-87-TBL
SOR Rear Cage Pad Kit-
Black Tuff Duck Vinyl-Fits 1958-1984 FJ40 & BJ40 SOR Rear Cage Kit-Comes with Tube Bar Padding and a full set of S-O-R Tube Bar Pad Covers to cover the entire bar - Club Price is $ 102.00 Click here for info about Club SOR
$120.00

Yes

SOR Rear Cage Pad Kit

245-87-TGY
SOR Rear Cage Roll Bar Pad Kit-
Grey Tuff Duck Vinyl-Fits 1958-1984 FJ40 & BJ40 SOR Rear Cage Kit-Comes with Tube Bar Padding and a full set of S-O-R Tube Bar Pad Covers to cover the entire bar - Club Price is $ 110.50 Click here for info about Club SOR
$130.00

Yes

SOR Rear Cage Pad Kit

245-87-TOD
SOR Rear Cage Roll Bar Pad Kit-
Olive Drab Tuff Duck Vinyl-Fits 1958-1984 FJ40 & BJ40 SOR Rear Cage Kit-Comes with Tube Bar Padding and a full set of S-O-R Tube Bar Pad Covers to cover the entire bar - Club Price is $ 102.00 Click here for info about Club SOR
$120.00

Yes

SOR Rear Cage Pad Kit

245-87-TTN
SOR Rear Cage Roll Bar Pad Kit-
Tan Tuff Duck Vinyl-Fits 1958-1984 FJ40 & BJ40 SOR Rear Cage Kit-Comes with Tube Bar Padding and a full set of S-O-R Tube Bar Pad Covers to cover the entire bar - Club Price is $ 102.00 Click here for info about Club SOR
$120.00

Yes

SOR Rear Cage Pad Kit

Service Tip: Safety Sense

TUBE BAR SAFETY SENSE: Safety sense: Remember, no tube bar device of any kind has ever, or will ever be a guarantee against injury or death & should certainly not be considered the sole means of protection in case of roll over. Remember, there are limitations to the severity of impact that any bar or cage can withstand, & they are not a substitute for a safe & careful driver. Therefore all tube bars are sold for decorative purpose only.

Related Accessories

See page 272 for Bikini Tops & SOR Summer Tops®.

Specter Off-Road, Inc. 21600 Nordhoff St. Chatsworth, Ca. 91311 USA Ph:(818) 882-1238 Fax:(818)882-7144 email: sor@sor.com Technical Assistance: tech@sor.com

Efficiency: 0.28