|
Page 288 Land Cruiser Shackles - Aftermarket:
|
|
|
These stock length Tri-Shackles (also called Anti-Inversion Shackles) are case hardened for higher resistance to wear. All surfaces are machined for superior performance. They use stock size bushings, and are greasable. The idea of the Anti-Inversion is to eliminate the risk of shackles locking up to the frame under extreme conditions. This also happens when the spring length is too short. Some aftermarket springs and rearched springs require these shackles. They are plated for a higher resistance to rust. Bushings sold separately.
See the chart below for shackle dimensions. See page 289 for a listing of bushings or see the chart on page 289 for bushings that fit the shackles found on this page. Bushings are sold individually.
Buy |
Part Number |
Description |
Price |
*In Stock |
Picture
(click to enlarge & close) |
|
|
288-70A-K
|
40 Series Tri Shackle Kit- Plated finish-Fits 1958-7/80 FJ40 & BJ40 front and rear - Greasable bolts-Stock bolt diameter - 4 piece set - Uses stock size bushings when used with stock leaf springs, sold separately see page 289 - Club Price is $ 149.60 Click here for info about Club SOR
|
$176.00
|
Yes
|
|
|
|
288-70B-K
|
40 Series Tri Shackle Kit- Plated finish- Fits 8/80-1984 FJ40, BJ40, FJ43, FJ45 front and rear - Greasable bolts-Stock bolt diameter - 4 piece set - Uses stock size bushings when used with stock leaf springs, sold separately see page 289 - Club Price is $ 149.60 Click here for info about Club SOR
|
$176.00
|
Yes
|
|
|
|
288-73A
|
40 & 45 Series Front Left Tri Shackle- Plated finish-Fits 1958-7/80 FJ40, BJ40 & FJ45 front left-Greasable bolts-Stock bolt diameter - Sold each - Uses stock size bushings when used with stock leaf springs, sold separately see page 289 - Club Price is $ 42.50 Click here for info about Club SOR
|
$50.00
|
Yes
|
|
|
|
288-73B
|
40, 43 & 45 Series Front Left Tri Shackle-Plated finish - Fits 8/80-1984 FJ40, BJ40, FJ43, FJ45 front left - Greasable bolts-Stock bolt diameter - Sold each - Uses stock size bushings when used with stock leaf springs, sold separately see page 289 - Club Price is $ 42.50 Click here for info about Club SOR
|
$50.00
|
Yes
|
|
|
|
288-74A
|
40 & 45 Series Front Right Tri Shackle - Plated finish-Fits 1958-7/80 FJ40, BJ40 & FJ45 front right - Greasable bolts - Stock bolt diameter - Sold each - Uses stock size bushings when used with stock leaf springs, sold separately see page 289 - Club Price is $ 42.50 Click here for info about Club SOR
|
$50.00
|
Yes
|
|
|
|
288-74B
|
40, 43 & 45 Series Front Right Tri Shackle - Plated finish - Fits 8/80-1984 FJ40, BJ40, FJ43, FJ45 front right - Greasable bolts-Stock bolt diameter - Sold each - Uses stock size bushings when used with stock leaf springs, sold separately see page 289 - Club Price is $ 42.50 Click here for info about Club SOR
|
$50.00
|
Yes
|
|
|
|
288-75A
|
40 Series Rear Right Tri Shackle- Plated finish-Fits 1958-7/80 FJ40, BJ40 rear left - Greasable bolts - Stock bolt diameter - Sold each - Uses stock size bushings, sold separately see page 289 - Club Price is $ 42.50 Click here for info about Club SOR
|
$50.00
|
Yes
|
|
|
|
288-75B
|
40, 43 & 45 Series Rear Left Tri Shackle-Plated finish - Fits 8/80-1984 FJ40, BJ40, FJ43, FJ45 rear left-Greasable bolts - Stock bolt diameter - Sold each - Uses stock size bushings, sold separately see page 289 - Club Price is $ 42.50 Click here for info about Club SOR
|
$50.00
|
Yes
|
|
|
|
288-76A
|
40 Series Rear Left Tri Shackle - Plated finish-Fits 1958-7/80 FJ40, BJ40 rear right - Greasable bolts-Stock bolt diameter - Sold each - Uses stock size bushings when used with stock leaf springs, sold separately see page 289 - Club Price is $ 42.50 Click here for info about Club SOR
|
$50.00
|
Yes
|
|
|
|
288-76B
|
40, 43 & 45 Series Rear Right Tri Shackle - Plated finish-Fits 8/80-1984 FJ40, BJ40, FJ43, FJ45 rear right - Greasable bolts - Stock bolt diameter - Sold each - Uses stock size bushings when used with stock leaf springs, sold separately see page 289 - Club Price is $ 42.50 Click here for info about Club SOR
|
$50.00
|
Yes
|
|
|
|
|
#288-80, 288-81 Installed
(click on picture for a larger view)
Made of 3/8 inch steel bar, 5/8 inch diameter bolts, these heavy duty Performance Shackles are available in two sizes: 1 1/2 inches longer than stock and 2 1/2 inches longer than stock. Bushings not included, see page 289. Sold in pairs.
Buy |
Part Number |
Description |
Price |
*In Stock |
Picture
(click to enlarge & close) |
|
|
288-80
|
1 1/2 Inch Performance Shackles- Fits 1958-1/90 40, 45, 55, 60 & 62 Series front and rear-5/8 inch bolt diameter - 4 1/2 inches pin to pin. Sold in pairs -Does NOT come with bushings, see page 289 - For greaseable bolts see part #288-89. - Club Price is $ 69.70 Click here for info about Club SOR
|
$82.00
|
Yes
|
|
|
|
288-81
|
2 1/2 Inch Performance Shackles - Fits 1958-1/90 40, 45, 55, 60 & 62 Series front and rear-5/8 inch bolt diameter - 5 1/4 inches pin to pin. Sold in pairs-2 1/2 inches longer than stock shackles-Does NOT come with bushings, see page 289 -For greaseable bolts see part #288-89. - Club Price is $ 71.40 Click here for info about Club SOR
|
$84.00
|
Yes
|
|
|
|
288-83
|
3 Inch Performance Shackles*Special Order NO Return- Fits 1958-1/90 40, 45, 55, 60 & 62 Series front and rear-5/8 inch bolt diameter - 6 inches pin to pin. Sold in pairs -Does NOT come with bushings, see page 289 - For greaseable bolts see part #288-89. - Club Price is $ 73.95 Click here for info about Club SOR (Special Order-not in stock-NO RETURN)
|
$87.00
|
No
|
|
|
|
|
For those of you who want to update your Performance or Con-Ferr standard shackle bolts to new Greasable Shackle Bolts. 5/8 inch bolt diameter. Sold in pairs.
|
|
|
Cad plated Greasable Shackle Pins allow you to grease the pins through a grease fitting without disassembly. Uses stock size bushings, see page 289. Sold each.
|
|
|
Update your factory O.E.M. shackles to new Greasable Shackles. These greasable shackles are available in stock length. Uses stock size bushings, see page 289. Sold each.
Buy |
Part Number |
Description |
Price |
*In Stock |
Picture
(click to enlarge & close) |
|
|
102-04A-G
|
Front & Rear Greasable Shackle- Fits 1958-7/80 40 Series front & rear-Stock length - Sold each - Uses stock size bushings (sold separately see page 289) - Club Price is $ 20.39 Click here for info about Club SOR
|
$23.99
|
Yes
|
|
|
|
102-04B-G
|
Front & Rear Greasable Shackle- Fits 8/80-1984 40 Series front & rear-Stock length - Sold each - Uses stock size bushings (sold separately see page 289) - Club Price is $ 20.40 Click here for info about Club SOR
|
$24.00
|
Yes
|
|
|
|
102-04P-F-G
|
Front Greasable Shackle- Fits 1963-8/80 45 Series front-Stock length sold each - Uses stock size bushings (sold separately see page 289) - Club Price is $ 20.39 Click here for info about Club SOR
|
$23.99
|
Yes
|
|
|
|
102-04P-R-G
|
Rear Greasable Shackle-
Fits 1963-8/80 45 Series Pick Up rear - Sold each - Stock length-Uses stock size bushings (sold separately see page 289) -Special Promotion - Everyone gets the Discounted Price on this part.
|
$38.00
|
Yes
|
|
|
|
102-04G-G
|
Front & Rear Greasable Shackle- Fits 1968-7/80 55 Series front & rear - Sold each - Stock length-Uses stock size bushings (sold separately see page 289) - Club Price is $ 31.44 Click here for info about Club SOR
|
$36.99
|
Yes
|
|
|
|
|
Service Tip: Shackle Length And Width Specifications
See page 289 for a listing of bushings or see the chart on page 289 for bushings for the shackles found on this page. |
Part #
(Click to Purchase) |
Shackle |
Fits |
Length
(Pin To Pin) |
Diagram |
Width |
Diagram |
|
Stock Shackle |
1958-7/80 FJ40 Front & Rear |
2 3/4" |
|
3 3/16" |
|
|
Stock Shackle |
8/80-1984 FJ40 Front & Rear |
3" |
#102-04F-F |
Stock Shackle |
1968-7/80 FJ55 Front |
2 1/2" |
3 1/8" |
#102-04F-R |
Stock Shackle |
1968-7/80 FJ55 Rear |
3 1/2" |
| |
|
Tri-Shackle Kit |
1958-7/80 FJ40 Front & Rear |
2 3/4" |
|
3 3/16" |
|
|
Tri-Shackle Kit |
1958-7/80 FJ40 Front & Rear |
3" |
|
Tri-Shackle |
1958-7/80 FJ40 Front Left |
2 3/4" |
|
Tri-Shackle |
8/80 1984 FJ40 Front Left |
3" |
|
Tri-Shackle |
1958-7/80 FJ40 Front Right |
2 3/4" |
|
Tri-Shackle |
8/80 1984 FJ40 Front Right |
3" |
|
Tri-Shackle |
1958-7/80 FJ40 Rear Left |
2 3/4" |
|
Tri-Shackle |
8/80 1984 FJ40 Rear Left |
3" |
|
Tri-Shackle |
1958-7/80 FJ40 Rear Right |
2 3/4" |
|
Tri-Shackle |
8/80 1984 FJ40 Rear Right |
3" |
| |
|
1" Performance
Shackle |
60 & 62 Series Front & Rear |
5 1/4" |
|
3 1/4" |
|
|
1 1/2" Performance
Shackle |
1958-1/90 40, 45, 55, 60
& 62 Series Front & Rear |
4 1/4" |
3" |
|
2 1/2" Performance
Shackle |
1958-1/90 40, 45, 55, 60
& 62 Series Front & Rear |
5 1/4" |
|
3" Performance Shackle |
40, 45 & 55 Series Front & Rear |
6" |
|
|
|
|
Page 288 Land Cruiser Shackles - Aftermarket:
|
|
