Back to page 288-Shackles-Aftermarket
Click
to
browse
Forward to page 289-Poly Bushings

Page 288
Shackles - Aftermarket

Page 288 Shackles - Aftermarket:
Previous || 40, 45 & 55 Series | 60, 62, 70 & 75 Series

Tri-Shackles

These stock length Tri-Shackles (also called Anti-Inversion Shackles) are case hardened for higher resistance to wear. All surfaces are machined for superior performance. They use stock size bushings, and are greasable. The idea of the Anti-Inversion is to eliminate the risk of shackles locking up to the frame under extreme conditions. This also happens when the spring length is too short. Some aftermarket springs and rearched springs require these shackles. They are cad plated for a higher resistance to rust. Bushings sold separately.

See the chart below for shackle dimensions. See page 289 for a listing of bushings or see the chart on page 289 for bushings that fit the shackles found on this page. Bushings are sold individually.

Buy
Part Number
Description
Price
*In Stock
Picture
(click to enlarge)
Add to Cart
60 & 62 Series Tri Shackle Kit-
Cad plated finish-Fits 8/80-1/90 FJ60 & FJ62,BJ,HJ,BJ70,75 Series front and rear - 4 piece set - Greasable bolts-Stock bolt diameter-Uses stock size bushings, sold separately see page 289- Club SOR Price is $ 149.60 Click here for info about Joining Club SOR or Click here if you are already a Club SOR Member
$176.00
Yes
Add to Cart
60, 62 & 75 Series Front Left Tri Shackle-
Cad plated finish-Fits 8/80-1/90 FJ60 & FJ62,BJ,HJ,BJ70,75 Series front left-Greasable bolts - Stock bolt diameter - Sold each - Uses stock size bushings, sold separately see page 289- Club SOR Price is $ 42.50 Click here for info about Joining Club SOR or Click here if you are already a Club SOR Member
$50.00
Yes
Add to Cart
60, 62 & 75 Series Front Right Tri Shackle-
Cad plated finish-Fits 8/80-1/90 FJ60 & FJ62,BJ,HJ,BJ70,75 Series front right-Greasable bolts-Stock bolt diameter - Sold each - Uses stock size bushings, sold separately see page 289- Club SOR Price is $ 42.50 Click here for info about Joining Club SOR or Click here if you are already a Club SOR Member
$50.00
Yes
Add to Cart
60, 62 & 75 Series Rear Left Tri Shackle-
Cad plated finish-Fits 8/80-1/90 FJ60 & FJ62,BJ,HJ,BJ70,75 Series rear left-Greasable bolts-Stock bolt diameter - Sold each - Uses stock size bushings, sold separately see page 289- Club SOR Price is $ 42.50 Click here for info about Joining Club SOR or Click here if you are already a Club SOR Member
$50.00
Yes
Add to Cart
60, 62 & 75 Series Rear Right Tri Shackle-
Cad plated finish-Fits 8/80-1/90 FJ60 & FJ62,BJ,HJ,BJ70,75 Series rear right - Greasable bolts - Stock bolt diameter - Sold each-Uses stock size bushings, sold separately see page 289- Club SOR Price is $ 42.50 Click here for info about Joining Club SOR or Click here if you are already a Club SOR Member
$50.00
Yes


Performance Shackles


#288-80, 288-81 Installed
(click on picture for a larger view)

Made of 3/8 inch steel bar, 5/8 inch diameter bolts, these heavy duty Performance Shackles are available in two sizes: 1 1/2 inches longer than stock and 2 1/2 inches longer than stock. Cad Plated. Bushings not included, see page 289. Sold in pairs.

Buy
Part Number
Description
Price
*In Stock
Picture
(click to enlarge)
Add to Cart
1 1/2 Inch Performance Shackles-
Fits 1958-1/90 40, 45, 55, 60 & 62 Series front and rear-5/8 inch bolt diameter - 4 1/2 inches pin to pin. Sold in pairs -Does NOT come with bushings, see page 289- Club SOR Price is $ 54.36 Click here for info about Joining Club SOR or Click here if you are already a Club SOR Member
$63.95
Yes
Add to Cart
2 1/2 Inch Performance Shackles -
Fits 1958-1/90 40, 45, 55, 60 & 62 Series front and rear-5/8 inch bolt diameter - 5 1/4 inches pin to pin. Sold in pairs-2 1/2 inches longer than stock shackles-Does NOT come with bushings, see page 289- Club SOR Price is $ 56.91 Click here for info about Joining Club SOR or Click here if you are already a Club SOR Member
$66.95
Yes


Greasable Shackle Bolts

For those of you who want to update your Performance or Con-Ferr standard shackle bolts to new Greasable Shackle Bolts. 5/8 inch bolt diameter. Sold in pairs.

Buy
Part Number
Description
Price
*In Stock
Picture
(click to enlarge)
Add to Cart
Greasable Shackle Bolts-
Fits #288-80 & #288-81 Performance Shackles-Sold in pairs- Club SOR Price is $ 16.58 Click here for info about Joining Club SOR or Click here if you are already a Club SOR Member
$19.50
Yes


Extreme Shackles

Taking your 60 & 62 Series seriously, or seriously taking your 60 & 62 Series off-road? Then these Extreme Heavy Duty Shackles are for you. Constructed of 3/8 inch plate steel, they feature a completely boxed in gusset for added strength and durability. Grade 5 hardened bolts are cross-drilled and grease fittings on the heads allow you to 'grease-up' just before hitting the trail. Even if you aren't a hard core four wheeler, these shackles are perfect to get that extra little lift, and the greasable bolts help soften the ride of your cruiser. Either case, these Extreme Shackles are 1 inch over stock in the rear and 2 inches over stock in the front. Bushings sold separately, see page 289. They are cad plated for a higher resistance to rust. Sold in pairs.

Buy
Part Number
Description
Price
*In Stock
Picture
(click to enlarge)
Add to Cart
3 Inch Extreme Shackles-
Cad plated finish-Fits 40, 45, 55, 60 & 62 Series front and rear-Greasable bolts - 5/8 inch bolt diameter - 6 inches pin to pin. Sold in pairs. Does NOT come with bushings, see page 289.- Club SOR Price is $ 82.45 Click here for info about Joining Club SOR or Click here if you are already a Club SOR Member
$97.00
Yes
Add to Cart
2 1/2 Inch Extreme Shackles-
Cad plated finish-Fits 40, 45 & 55, 60 & 62 Series front and rear-Greasable bolts-5/8 inch bolt diameter - 5 1/4 inches pin to pin. Sold in pairs-Sold in pairs. Does NOT come with bushings, see page 289.- Club SOR Price is $ 82.45 Click here for info about Joining Club SOR or Click here if you are already a Club SOR Member
$97.00
Yes
Add to Cart
1 Inch Extreme Shackles-
Cad plated finish-Fits 60 & 62 Series front and rear-Greasable bolts-11/16 inch (18mm) bolt diameter - 4 15/16 inches pin to pin. Sold in pairs - Does NOT come with bushings, see page 289.- Club SOR Price is $ 82.45 Click here for info about Joining Club SOR or Click here if you are already a Club SOR Member
$97.00
Yes


Greasable Shackle Pins

Cad plated Greasable Shackle Pins allow you to grease the pins through a grease fitting without disassembly. Uses stock size bushings, see page 289. Sold each.

Buy
Part Number
Description
Price
*In Stock
Picture
(click to enlarge)
Add to Cart
Front & Rear Greasable Shackle Pin-
Fits 8/80-1/90 60 & 62 Series front & rear - Sold each - Uses stock size bushings (sold separately see page 289)- Club SOR Price is $ 20.40 Click here for info about Joining Club SOR or Click here if you are already a Club SOR Member
$24.00
Yes
Add to Cart
Front Greasable Shackle Pin-
Fits 11/84-1/90 BJ70 front - Sold each - Uses stock size bushings (sold separately see page 289) - Club SOR Price is $ 20.40 Click here for info about Joining Club SOR or Click here if you are already a Club SOR Member
$24.00
Yes


Greasable Shackles

Update your factory O.E.M. shackles to new Greasable Shackles. These greasable shackles are available in stock length. Uses stock size bushings, see page 289. Sold each.

Buy
Part Number
Description
Price
*In Stock
Picture
(click to enlarge)
Add to Cart
Front Greasable Shackle-
Fits 8/80-8/87 60 Series front-Stock length - Sold each - Uses stock size bushings (sold separately see page 289)- Club SOR Price is $ 20.40 Click here for info about Joining Club SOR or Click here if you are already a Club SOR Member
$24.00
Yes
Add to Cart
Front Greasable Shackle-
Fits 8/87-1/90 62 Series front-Stock length - Sold each - Uses stock size bushings (sold separately see page 289) - Club SOR Price is $ 20.40 Click here for info about Joining Club SOR or Click here if you are already a Club SOR Member
$24.00
Yes
Add to Cart
Rear Greasable Shackle-
Fits 8/80-1/90 60 & 62 Series rear-Stock length - Sold each - Uses stock size bushings (sold separately see page 289) - Club SOR Price is $ 26.34 Click here for info about Joining Club SOR or Click here if you are already a Club SOR Member
$30.99
Yes
Add to Cart
Front Greasable Shackle-
Fits 11/84-8/86 BJ70 front-Stock length - Sold each -Uses stock size bushings (sold separately see page 289)- Club SOR Price is $ 20.40 Click here for info about Joining Club SOR or Click here if you are already a Club SOR Member
$24.00
Yes
Add to Cart
Rear Greasable Shackle-
Fits 11/84-1/90 BJ70 rear-Stock length - Sold each - Uses stock size bushings (sold separately see page 289) - Club SOR Price is $ 26.34 Click here for info about Joining Club SOR or Click here if you are already a Club SOR Member
$30.99
Yes
Add to Cart
Front Greasable Shackle-
Fits 11/84-1/90 FJ75 & HJ75 front - Stock length - Sold each - Uses stock size bushings (sold separately see page 289) - Club SOR Price is $ 20.40 Click here for info about Joining Club SOR or Click here if you are already a Club SOR Member
$24.00
Yes
Add to Cart
Rear Greasable Shackle-
Fits 11/84-1/90 FJ75 & HJ75 rear - Stock length - Sold each - Uses stock size bushings (sold separately see page 289) - Club SOR Price is $ 33.14 Click here for info about Joining Club SOR or Click here if you are already a Club SOR Member
$38.99
Yes
Add to Cart
GREASE SHACKLE-
1/90-- FZJ/HZJ75 REAR- Club SOR Price is $ 33.14 Click here for info about Joining Club SOR or Click here if you are already a Club SOR Member
$38.99
Yes


Service Tip: Shackle Length And Width Specifications

See page 289 for a listing of bushings or see the chart on page 289 for bushings for the shackles found on this page.

Part #
(Click to purchase)
Shackle
Fits
Length
(Pin To Pin)
Diagram
Width
Diagram
Stock Shackle
8/80-8/87 FJ60 Front
3"
3 3/16"
Stock Shackle
8/87-1/90 FJ62 Front
3"
3 3/16"
Stock Shackle
8/80-1/90 FJ60 & FJ62 Rear
3 1/2"
3 1/4"
 
Tri-Shackle Kit
8/80 - 1/90 60 & 62 Series Front and Rear
3" Front
3 1/2" Rear
3 3/16" Front
3 1/4" Rear
Tri-Shackle
8/80 - 1/90 60 & 62 Series Front Left
3"
3 3/16"
Tri-Shackle
8/80 - 1/90 60 & 62 Series Front Right
Tri-Shackle
8/80 - 1/90 60 & 62 Series Rear Left
3 1/2"
3 1/4"
Tri-Shackle
8/80 - 1/90 60 & 62 Series Rear Right
 
1 1/2" Performance Shackle
1958-1/90 40, 45, 55, 60 & 62 Series Front & Rear
4 1/4"
3
2 1/2" Performance Shackle
1958-1/90 40, 45, 55, 60 & 62 Series Front & Rear
5 1/4"
3"
1" Extreme Shackle
60 & 62 Series Front & Rear
4 15/16"
3 1/4"

Page 288 Shackles - Aftermarket:
Previous || 40, 45 & 55 Series | 60, 62, 70 & 75 Series

Back to page 288-Shackles-Aftermarket
   Use arrows to browse catalog   
Forward to page 289-Poly Bushings


Specter Off-Road, Inc.
21600 Nordhoff St.
Chatsworth, Ca. 91311 USA
Ph:(818) 882-1238 Fax:(818)882-7144
email: sor@sor.com
Technical Assistance: tech@sor.com

Efficiency: 0.80

Copyright © 2010, Specter Off-Road, Inc. All rights reserved.
Specter Off-Road, Inc. is not affiliated with Toyota Motor Sales or Toyota Motor Corporation