
1958-8/87 Manifolds
1958-1967


SOR has developed a superior Graphite Manifold Gasket for your Land Cruiser engine. We believe that SOR's Graphite Manifold Gasket is the highest quality graphite type gasket you can get for your Land Cruiser. Our exclusive material has metal reinforcement embedded into the graphite matrix to make the material more durable than other manufacturer's graphite gaskets. SOR Graphite Manifold Gaskets are made from a unique thick graphite material that is about 1/8" thick and is designed to be squeezed during installation. This squeeze helps seal manifolds and headers that are not perfectly flat. Resists leaks due to warping. This graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Suggested fastener torque of 20-25 ft lb.
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
044-01A-SOR |
SOR GRAPHITE MANIFOLD GASKET -
Fits 1958-1967 Siamese port gas engine. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb. On Sale - Everyone gets the Discounted Price on this part. ![]() |
12.00 |
![]() |
![]() |
1968-1974



Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
044-01B-SOR |
SOR GRAPHITE MANIFOLD GASKET -
Fits 1968-1974 F gas engine. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb. On Sale - Everyone gets the Discounted Price on this part. (an Additional Handling Charge of 16.25 is already included in price) ![]() |
71.25 |
![]() |
![]() |
||
044-01B-PAIR |
PAIR SOR GRAPHITE MANIFOLD GASKET SET -
Fits 1968-1974 F gas engine. SAVE $$ when you buy 2 gaskets. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb. On Sale - Everyone gets the Discounted Price on this part. (an Additional Handling Charge of 16.25 is already included in price) ![]() |
96.25 |
![]() |
![]() |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
044-01BSORBLEM |
SOR GRAPHITE MANIFOLD GASKET -
Fits 1968-1974 F gas engine. This a clearance item - These gaskets are sale priced because there is a minor cosmetic flaw at one end of the gasket - SEE PHOTO - This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb. On Sale - Everyone gets the Discounted Price on this part. (a Refundable Core Charge of 16.25 is already included in price) ![]() |
46.25 |
![]() |
![]() |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
044-01B |
AFTERMARKET MANIFOLD GASKET -
Fits 1968-1974 F gas engine On Sale - Everyone gets the Discounted Price on this part. (an Additional Handling Charge of 16.25 is already included in price) ![]() |
39.75 |
![]() |
![]() |
||
044-01C |
MANIFOLD GASKET -
Fits 1/75-8/87 2F gas engine On Sale - Everyone gets the Discounted Price on this part. (an Additional Handling Charge of 16.25 is already included in price) ![]() |
57.99 |
![]() |
![]() |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
324-715 |
KEVLAR HEADER GASKET -
Fits 1968-8/87 Club Price with 15% Discount is $ 13.39 Click here for info about joining Club SOR ![]() |
15.75 |
![]() |
![]() |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
044-08B-SOR |
GRAPHITE HEATRISER GASKET -
Fits 1968-1974 F gas engine - Graphite gaskets are made from a unique thick graphite material that is about 1/8" thick and is designed to be squeezed during installation. This squeeze helps seal manifolds that are not perfectly flat. Resists leaks due to warping. This graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfgr suggested fastener torque of 20-25 ft lb. On Sale - Everyone gets the Discounted Price on this part. ![]() |
18.00 |
![]() |
![]() |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
044-02B-KIT |
MANIFOLD STUD KIT -
1968-1974 F gas engine - Kit has qty 6 manifold studs, qty 6 manifold nuts, and qty 6 manifold washers. On Sale - Everyone gets the Discounted Price on this part. ![]() |
29.90 |
![]() |
![]() |
||
044-02XA-KIT |
MANIFOLD STUD STEP–DOWN KIT -
Fits 12mm diameter at one end and 10mm at the other, 37mm long. Comes with nut and washer for 10mm end. Set of 6. Designed for later head with earlier manifold set. On Sale - Everyone gets the Discounted Price on this part. ![]() |
71.88 |
![]() |
![]() |
||
044-02XB-KIT |
MANIFOLD STUD STEP–UP KIT -
Fits 12mm diameter at one end and 10mm at the other, 37mm long. Comes with nuts and washers for larger 12mm ends. Set of 6. Designed for early type head with later model manifolds. On Sale - Everyone gets the Discounted Price on this part. ![]() |
71.88 |
![]() |
![]() |
1/75-8/76


Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
044-01C-SOR |
SOR GRAPHITE MANIFOLD GASKET -
Fits 1/75-8/87 2F gas engine. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb. On Sale - Everyone gets the Discounted Price on this part. (an Additional Handling Charge of 16.25 is already included in price) ![]() |
71.25 |
![]() |
![]() |
||
044-01C-PAIR |
PAIR SOR GRAPHITE MANIFOLD GASKET SET -
Fits 1975-1987 2F gas engine. SAVE $$ when you buy 2 gaskets. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb. On Sale - Everyone gets the Discounted Price on this part. (an Additional Handling Charge of 16.25 is already included in price) ![]() |
96.25 |
![]() |
![]() |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
044-01CSORBLEM |
SOR GRAPHITE MANIFOLD GASKET -
Fits 1/75-8/87 2F gas engine. This is a clearance item - These gaskets are sale priced because there is a minor cosmetic flaw at one end of the gasket - SEE PHOTO - This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb. On Sale - Everyone gets the Discounted Price on this part. (a Refundable Core Charge of 16.25 is already included in price) ![]() |
46.25 |
![]() |
![]() |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
044-01B |
AFTERMARKET MANIFOLD GASKET -
Fits 1968-1974 F gas engine On Sale - Everyone gets the Discounted Price on this part. (an Additional Handling Charge of 16.25 is already included in price) ![]() |
39.75 |
![]() |
![]() |
||
044-01C |
MANIFOLD GASKET -
Fits 1/75-8/87 2F gas engine On Sale - Everyone gets the Discounted Price on this part. (an Additional Handling Charge of 16.25 is already included in price) ![]() |
57.99 |
![]() |
![]() |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
324-715 |
KEVLAR HEADER GASKET -
Fits 1968-8/87 Club Price with 15% Discount is $ 13.39 Click here for info about joining Club SOR ![]() |
15.75 |
![]() |
![]() |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
044-12A |
HEAT RISER INSULATOR -
Fits 1/75-7/80 2F gas engine - Federal specification On Sale - Everyone gets the Discounted Price on this part. ![]() |
83.01 |
![]() |
![]() |

SOR now offers a replacement stainless steel heat riser for 1/75 to 8/87 intake and exhaust manifold assemblies. This insulator installs between the intake and exhaust manifold. This helps avoid overheating and possible cracking of the intake manifold, a common problem on 2F intake manifolds. This is an important consideration since most of these manifolds are no longer available. Since the insulator for the 1/76 to 7/80 California special is no longer available, we recommend using this insulator. Some heat riser flaps will need minor trimming to fit the Stainless Steel Insulator.
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
044-12C |
STAINLESS STEEL HEAT RISER INSULATOR -
Fits 1/75-8/87 2F gas engine manifold assemblies (updated part) NON-USA style - Only one gasket needed On Sale - Everyone gets the Discounted Price on this part. ![]() |
44.95 |
![]() |
![]() |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
044-08C |
HEAT RISER GASKET -
Fits 1/75-7/80 2F gas engine - (2 required) On Sale - Everyone gets the Discounted Price on this part. ![]() |
18.53 |
![]() |
![]() |
||
044-08C-SOR |
GRAPHITE HEATRISER GASKET -
Fits 1/75-7/87 - Requires insulator 044-12C for installation. Only one gasket required between insulator and exhaust manifold. Graphite gaskets are made from a unique thick graphite material that is about 1/8" thick and is designed to be squeezed during installation. This squeeze helps seal manifolds that are not perfectly flat. Resists leaks due to warping. This graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfgr suggested fastener torque of 20-25 ft lb. On Sale - Everyone gets the Discounted Price on this part. ![]() |
18.00 |
![]() |
![]() |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
044-02C-KIT |
MANIFOLD STUD KIT -
1/75-8/87 2F gas engine - Kit has qty 6 manifold studs, qty 6 manifold nuts, qty 6 manifold washers, and 2 end bolts. On Sale - Everyone gets the Discounted Price on this part. ![]() |
44.00 |
![]() |
![]() |
||
044-02XA-KIT |
MANIFOLD STUD STEP–DOWN KIT -
Fits 12mm diameter at one end and 10mm at the other, 37mm long. Comes with nut and washer for 10mm end. Set of 6. Designed for later head with earlier manifold set. On Sale - Everyone gets the Discounted Price on this part. ![]() |
71.88 |
![]() |
![]() |
||
044-02XB-KIT |
MANIFOLD STUD STEP–UP KIT -
Fits 12mm diameter at one end and 10mm at the other, 37mm long. Comes with nuts and washers for larger 12mm ends. Set of 6. Designed for early type head with later model manifolds. On Sale - Everyone gets the Discounted Price on this part. ![]() |
71.88 |
![]() |
![]() |
1/76-1/79 California Model


Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
044-01C-SOR |
SOR GRAPHITE MANIFOLD GASKET -
Fits 1/75-8/87 2F gas engine. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb. On Sale - Everyone gets the Discounted Price on this part. (an Additional Handling Charge of 16.25 is already included in price) ![]() |
71.25 |
![]() |
![]() |
||
044-01C-PAIR |
PAIR SOR GRAPHITE MANIFOLD GASKET SET -
Fits 1975-1987 2F gas engine. SAVE $$ when you buy 2 gaskets. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb. On Sale - Everyone gets the Discounted Price on this part. (an Additional Handling Charge of 16.25 is already included in price) ![]() |
96.25 |
![]() |
![]() |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
044-01B |
AFTERMARKET MANIFOLD GASKET -
Fits 1968-1974 F gas engine On Sale - Everyone gets the Discounted Price on this part. (an Additional Handling Charge of 16.25 is already included in price) ![]() |
39.75 |
![]() |
![]() |
||
044-01C |
MANIFOLD GASKET -
Fits 1/75-8/87 2F gas engine On Sale - Everyone gets the Discounted Price on this part. (an Additional Handling Charge of 16.25 is already included in price) ![]() |
57.99 |
![]() |
![]() |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
324-715 |
KEVLAR HEADER GASKET -
Fits 1968-8/87 Club Price with 15% Discount is $ 13.39 Click here for info about joining Club SOR ![]() |
15.75 |
![]() |
![]() |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
044-12A |
HEAT RISER INSULATOR -
Fits 1/75-7/80 2F gas engine - Federal specification On Sale - Everyone gets the Discounted Price on this part. ![]() |
83.01 |
![]() |
![]() |

SOR now offers a replacement stainless steel heat riser for 1/75 to 8/87 intake and exhaust manifold assemblies. This insulator installs between the intake and exhaust manifold. This helps avoid overheating and possible cracking of the intake manifold, a common problem on 2F intake manifolds. This is an important consideration since most of these manifolds are no longer available. Since the insulator for the 1/76 to 7/80 California special is no longer available, we recommend using this insulator. Some heat riser flaps will need minor trimming to fit the Stainless Steel Insulator.
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
044-12C |
STAINLESS STEEL HEAT RISER INSULATOR -
Fits 1/75-8/87 2F gas engine manifold assemblies (updated part) NON-USA style - Only one gasket needed On Sale - Everyone gets the Discounted Price on this part. ![]() |
44.95 |
![]() |
![]() |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
044-08C |
HEAT RISER GASKET -
Fits 1/75-7/80 2F gas engine - (2 required) On Sale - Everyone gets the Discounted Price on this part. ![]() |
18.53 |
![]() |
![]() |
||
044-08C-SOR |
GRAPHITE HEATRISER GASKET -
Fits 1/75-7/87 - Requires insulator 044-12C for installation. Only one gasket required between insulator and exhaust manifold. Graphite gaskets are made from a unique thick graphite material that is about 1/8" thick and is designed to be squeezed during installation. This squeeze helps seal manifolds that are not perfectly flat. Resists leaks due to warping. This graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfgr suggested fastener torque of 20-25 ft lb. On Sale - Everyone gets the Discounted Price on this part. ![]() |
18.00 |
![]() |
![]() |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
044-02C-KIT |
MANIFOLD STUD KIT -
1/75-8/87 2F gas engine - Kit has qty 6 manifold studs, qty 6 manifold nuts, qty 6 manifold washers, and 2 end bolts. On Sale - Everyone gets the Discounted Price on this part. ![]() |
44.00 |
![]() |
![]() |
||
044-02XA-KIT |
MANIFOLD STUD STEP–DOWN KIT -
Fits 12mm diameter at one end and 10mm at the other, 37mm long. Comes with nut and washer for 10mm end. Set of 6. Designed for later head with earlier manifold set. On Sale - Everyone gets the Discounted Price on this part. ![]() |
71.88 |
![]() |
![]() |
||
044-02XB-KIT |
MANIFOLD STUD STEP–UP KIT -
Fits 12mm diameter at one end and 10mm at the other, 37mm long. Comes with nuts and washers for larger 12mm ends. Set of 6. Designed for early type head with later model manifolds. On Sale - Everyone gets the Discounted Price on this part. ![]() |
71.88 |
![]() |
![]() |
8/76-8/87


Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
044-01C-SOR |
SOR GRAPHITE MANIFOLD GASKET -
Fits 1/75-8/87 2F gas engine. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb. On Sale - Everyone gets the Discounted Price on this part. (an Additional Handling Charge of 16.25 is already included in price) ![]() |
71.25 |
![]() |
![]() |
||
044-01C-PAIR |
PAIR SOR GRAPHITE MANIFOLD GASKET SET -
Fits 1975-1987 2F gas engine. SAVE $$ when you buy 2 gaskets. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb. On Sale - Everyone gets the Discounted Price on this part. (an Additional Handling Charge of 16.25 is already included in price) ![]() |
96.25 |
![]() |
![]() |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
044-01B |
AFTERMARKET MANIFOLD GASKET -
Fits 1968-1974 F gas engine On Sale - Everyone gets the Discounted Price on this part. (an Additional Handling Charge of 16.25 is already included in price) ![]() |
39.75 |
![]() |
![]() |
||
044-01C |
MANIFOLD GASKET -
Fits 1/75-8/87 2F gas engine On Sale - Everyone gets the Discounted Price on this part. (an Additional Handling Charge of 16.25 is already included in price) ![]() |
57.99 |
![]() |
![]() |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
324-715 |
KEVLAR HEADER GASKET -
Fits 1968-8/87 Club Price with 15% Discount is $ 13.39 Click here for info about joining Club SOR ![]() |
15.75 |
![]() |
![]() |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
044-12A |
HEAT RISER INSULATOR -
Fits 1/75-7/80 2F gas engine - Federal specification On Sale - Everyone gets the Discounted Price on this part. ![]() |
83.01 |
![]() |
![]() |
||
044-12D |
HEAT RISER INSULATOR -
Fits 8/80-8/87 2F gas engine On Sale - Everyone gets the Discounted Price on this part. ![]() |
83.01 |
![]() |
![]() |

SOR now offers a replacement stainless steel heat riser for 1/75 to 8/87 intake and exhaust manifold assemblies. This insulator installs between the intake and exhaust manifold. This helps avoid overheating and possible cracking of the intake manifold, a common problem on 2F intake manifolds. This is an important consideration since most of these manifolds are no longer available. Since the insulator for the 1/76 to 7/80 California special is no longer available, we recommend using this insulator. Some heat riser flaps will need minor trimming to fit the Stainless Steel Insulator.
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
044-12C |
STAINLESS STEEL HEAT RISER INSULATOR -
Fits 1/75-8/87 2F gas engine manifold assemblies (updated part) NON-USA style - Only one gasket needed On Sale - Everyone gets the Discounted Price on this part. ![]() |
44.95 |
![]() |
![]() |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
044-08C |
HEAT RISER GASKET -
Fits 1/75-7/80 2F gas engine - (2 required) On Sale - Everyone gets the Discounted Price on this part. ![]() |
18.53 |
![]() |
![]() |
||
044-08C-SOR |
GRAPHITE HEATRISER GASKET -
Fits 1/75-7/87 - Requires insulator 044-12C for installation. Only one gasket required between insulator and exhaust manifold. Graphite gaskets are made from a unique thick graphite material that is about 1/8" thick and is designed to be squeezed during installation. This squeeze helps seal manifolds that are not perfectly flat. Resists leaks due to warping. This graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfgr suggested fastener torque of 20-25 ft lb. On Sale - Everyone gets the Discounted Price on this part. ![]() |
18.00 |
![]() |
![]() |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
044-02C-KIT |
MANIFOLD STUD KIT -
1/75-8/87 2F gas engine - Kit has qty 6 manifold studs, qty 6 manifold nuts, qty 6 manifold washers, and 2 end bolts. On Sale - Everyone gets the Discounted Price on this part. ![]() |
44.00 |
![]() |
![]() |
||
044-02XA-KIT |
MANIFOLD STUD STEP–DOWN KIT -
Fits 12mm diameter at one end and 10mm at the other, 37mm long. Comes with nut and washer for 10mm end. Set of 6. Designed for later head with earlier manifold set. On Sale - Everyone gets the Discounted Price on this part. ![]() |
71.88 |
![]() |
![]() |
||
044-02XB-KIT |
MANIFOLD STUD STEP–UP KIT -
Fits 12mm diameter at one end and 10mm at the other, 37mm long. Comes with nuts and washers for larger 12mm ends. Set of 6. Designed for early type head with later model manifolds. On Sale - Everyone gets the Discounted Price on this part. ![]() |
71.88 |
![]() |
![]() |