Save yourself a headache, confirm your parts. Be sure the parts you are ordering will fit the Land Cruiser you drive. Ensure your production date falls within the timeframe noted on the “Fits” line in description for the parts you order. If you are not sure, give us a call, we’re here to help.
Fits 1963-9/73 - between January 1, 1963 and August 31, 1973 Fits 1963-1974 - between January 1, 1963 and December 31, 1974 |
Replacement Nut, Washer, Cone & Stud Kit for early 80 Series factory drive flange. This kit can be used on 80 Series Cruisers through 1998 but contains standard nut as opposed to cap or "acorn nut". For cap nut, order #080-69A separately (Qty 6 per side, sold each).
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture (Click to Enlarge & Close) |
080-67-KIT |
AISIN HUB CONE KIT-
Fits 9/75-1/98 Aisin Hub-Comes with cone (qty 1), washer (qty 1), nut (qty 1), & stud (qty 1) - Does Not have Acorn Nut as found on 8/80-1/90 front hubs purchase 080-69A separately if desired. On Sale - Everyone gets the Discounted Price on this part. ![]() |
7.00 |
![]() |
![]() |
||
080-08B |
FRONT AXLE HUB STUD -
Fits 9/75-1/98 - For kit see #080-67-KIT front axle cone kit Club Price with 15% Discount is $ 1.17 Click here for info about joining Club SOR ![]() |
1.38 |
![]() |
![]() |
||
080-67 |
FAX CONE-
Fits 9/75-1/98 AISIN HUB On Sale - Everyone gets the Discounted Price on this part. ![]() |
4.94 |
![]() |
![]() |
||
080-68 |
0.88 |
![]() |
![]() |
|||
080-69A |
OEM CAP (ACORN) NUT -**Special Order - NO Return
Fits 8/80-1/90 with free wheeling hubs - (6 required per side) Club Price with 15% Discount is $ 1.85 Click here for info about joining Club SOR Special Order - NO Return ![]() |
2.18 |
![]() |
![]() |
||
080-69B |
OEM FRONT AXLE HUB HEX NUT -
Fits 8/80-1/98 Club Price with 15% Discount is $ 2.65 Click here for info about joining Club SOR ![]() |
3.12 |
![]() |
![]() |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture (Click to Enlarge & Close) |
102-909 |
AFTERMARKET UPPER AND LOWER BALL JOINT KIT -
Fits 1/98-2007 100 Series Aftermarket Ball Joint Kit. Toyota does not sell the Ball Joints separately. Toyota sells the entire A Arm assembly only. Save money and change just the Ball Joints. On Sale - Everyone gets the Discounted Price on this part. ![]() |
120.00 |
![]() |
![]() |
![]() |
Bearing Brands in Bearing Kits from SOR
Specter Off-Road only uses top quality automotive bearings in our kits that meet or exceed the original factory manufacturing specifications. You will find only quality bearings from American, Japanese or European manufacturers at Specter Off-Road. We here at SOR have noticed a number of less expensive bearings showing up in the Land Cruiser marketplace. Several bearings we have inspected are much lower quality than the original equipment Toyota bearing. Insist on high quality replacement bearings for your Cruiser. |
Up until 1998 the Land Cruiser used a straight axle(or live axle) closed knuckle. The knuckle pivots left to right, using knuckle bearings, one top and one bottom per side. With the use of larger tires and rims the knuckle bearing (AKA trunnion bearing, king pin bearing) takes a lot of pounding abuse. Most of the wear to the bearing occurs in the straight line position. Rotating knuckle left to right and the knuckle wants to return to center every time is a sign of bearing wear. For 80 Series, the kits do not come with shims, you must reuse your old ones.
Always refer to your factory Chassis Body Manual for procedures see page 221. Part #200-12 hub socket is a great tool to have to achieve proper torque specs.
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture (Click to Enlarge & Close) |
080-400M |
KNUCKLE BEARING KIT -
Fits 1/98 and later NON-USA HDJ 78/79 and 100. Comes with knuckle bearings (qty 4), birfield seals (qty 2), lock tab washers (qty 2), needle bearings for spindle (qty 2), spindle bushings (qty 2), gaskets, shims, felts and retainers - Does both sides On Sale - Everyone gets the Discounted Price on this part. ![]() |
115.00 |
![]() |
![]() |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture (Click to Enlarge & Close) |
080-40L |
MINOR SHIM AND GASKET SET -
Fits 11/84-1/90 FJ/BJ70 series - Comes with shims and gaskets - Does both sides. Purchase locking hub kit separately. If you have Warn hubs order part #333-7309. If you have Aisin (OEM) hubs order part #080-89. Club Price with 15% Discount is $ 25.50 Click here for info about joining Club SOR ![]() |
30.00 |
![]() |
![]() |
||
080-40M |
FRONT AXLE SHIM AND GASKET KIT -
Fits 1/90-- FJ7#/LJ#/RJ# - Comes with gaskets, felts, wipers and shims - does both sides. Club Price with 15% Discount is $ 51.00 Click here for info about joining Club SOR ![]() |
60.00 |
![]() |
![]() |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture (Click to Enlarge & Close) |
080-14Z-2 |
OEM FRONT 5 LUG HUB -**Special Order - NO Return
Fits 8/99-11/16 FZJ/HDJ/HZJ/VDJ7# series and FZJ/HZJ105 series On Sale - Everyone gets the Discounted Price on this part. Special Order - NO Return ![]() |
360.54 |
![]() |
![]() |
||
080-14Z-2-A |
AFTERMARKET FRONT 5 LUG HUB -
Fits 8/99-11/16 FZJ/HDJ/HZJ/VDJ7# series and FZJ/HZJ105 series Club Price with 15% Discount is $ 187.00 Click here for info about joining Club SOR ![]() |
220.00 |
![]() |
![]() |
Kit includes quantity 2 each of the outer knuckle seals, #080-61 and 2 each of the inner knuckle felts, #080-62. Does not include metal flange. If your metal flange is damaged you will need to order part number 080-80A, Oil Seal Kit.
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture (Click to Enlarge & Close) |
080-80C |
FAX OIL SEAL SET -
Fits 1/90- 70 SERIES 1 SIDE Purchase locking hub kit separately. If you have Warn hubs order part #333-7309. If you have Aisin (OEM) Hubs order part #080-89 Club Price with 15% Discount is $ 17.75 Click here for info about joining Club SOR ![]() |
20.88 |
![]() |
![]() |
If you are replacing your front wheel bearings, you can now order inner and outer wheel bearings, wheel seals, lock tabs, and hub gaskets using one part number only. One kit does both sides.
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture (Click to Enlarge & Close) |
080-01P-KIT |
FRONT AXLE OUTER WHEEL BEARING KIT -
Fits 1/98-2007 UZJ100 - Comes with inner and outer wheel bearings, wheel seals, lock tabs, and hub gaskets - Does both sides. Club Price with 15% Discount is $ 204.26 Click here for info about joining Club SOR ![]() |
240.30 |
![]() |
![]() |
Replacement Nut, Washer, Cone & Stud Kit for early 80 Series factory drive flange. This kit can be used on 80 Series Cruisers through 1998 but contains standard nut as opposed to cap or "acorn nut". For cap nut, order #080-69A separately (Qty 6 per side, sold each).
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture (Click to Enlarge & Close) |
080-67P-KIT |
FRONT HUB CONE KIT -
Fits 1/98-2007 UZJ100 Aisin Hub-Comes with cone (qty 1), washer (qty 1), nut (qty 1), & stud (qty 1) On Sale - Everyone gets the Discounted Price on this part. ![]() |
7.00 |
![]() |
![]() |
||
080-67Z-KIT |
FRONT HUB CONE KIT -
Fits 1/90--70 SERIES Aisin Hub-Comes with cone (qty 1), washer (qty 1), nut (qty 1), & stud (qty 1) On Sale - Everyone gets the Discounted Price on this part. ![]() |
7.00 |
![]() |
![]() |