2 Complete Knuckle Assemblies

Outer Birfield Axles

Surfaced Used Rotors

 

Caliper Cup Kit

Locking Hubs

Backing Plate Eliminator Kit

(click for large picture)

Specter has the answer for 7/70-9/75 FJ40 & FJ55 Models who are tired of not stopping straight. Front Disc Brake Changeover Kit. All parts are from later year Toyota Land Cruisers, not modified GM components, Toyota mini Pickup trucks or aftermarket manufactures who's service parts can be hard to find in a small town on a late Saturday afternoon. Later year Land Cruiser components give you the best of what the Land Cruiser Front Disc Brake Changeover Kit can offer:large wheel bearings, large heat treated CV axle assembly, large spindles, and large knuckles and vented rotors.

On early Land Cruisers 1958-7/70 it takes major significant modifications to fit disc brakes on these Cruisers. Firewall changes, pedal bucket modifications, differences in hard line fittings all add up to changes beyond just bolting on other year parts. On these models you will need to be your own engineer and fabricator. 1958-9/73 Cruisers with stock riveted wheels, the hub of the wheel is riveted to the outer rim and will not fit the calipers. These will need to updated to the non riveted, later style, welded type wheel. All SOR Front Disc Changeover Kits parts are from Land Cruiser axles only, not mini truck or some other vehicle.There are different kits offered for customers with different needs. Read the contents of the kits carefully. Used parts have been disassembled and inspected to be in good condition. Installing disc brakes on a vehicle that was not originally equipped with them does require modifications. The installer assumes the responsibility to determine the suitability of these components for the intended application.

Depending on which kit you choose, you may also need to order: Seal #080-35B (qty 2), seals #080-59 (qty 2), shim & gasket set #080-40C (qty 1), lock tabs #080-04B (qty 2), and a hub socket #200-12B. Specter Off Road also suggests a new disc brake master cylinder #014-01D. Or if complete new bearings are desired order Disc Brake Bearing Kit #084-101A.

Buy	Quantity	Part Number	Description	Price	In Stock	Picture Click to Enlarge
		084-108-KIT	FRONT DISC BRAKE CHANGE OVER KIT - Fits 7/70-9/75 FJ40 and FJ55 - This kit consists of USED Land Cruiser axle parts from the knuckles out board. These are not Aftermarket or Chevrolet parts. SOR offers only front disc conversions utilizing original Toyota Land Cruiser major components. USED parts include wheel hubs, spindles, knuckles, calipers and outer Birfield axles. The USED parts are straight take outs that are cleaned and inspected. Calipers are considered cores that need rebuilding, or be exchanged for rebuilt calipers. NEW parts include OEM Locking Hubs, SOR Backing Plate Eliminator Kit 084-19A-KIT, NEW aftermarket Rotors 084-02B-A and Caliper Rebuild Kit 084-04A. The USED calipers need rebuilding or use as cores for replacement calipers 084-02. Brake pads are not included, order 084-03 separately. For a complete bearing and seal kit, order our Disc Brake Bearing Kit 084-101A. Depending on the intended application you may need a new Brake Master Cylinder and an aftermarket Adjustable Proportioning Valve. Installing disc brakes on a vehicle that was not originally equipped with them does require modification. The installer assumes the responsibility to determine the suitability of these components for the intended application. For Rear Disc Brake Kit see page 292. On Sale - Everyone gets the Discounted Price on this part. (a Refundable Core Charge of 50.00 is already included in price)  WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov	2185.00
		084-02B-A	AFTERMARKET FRONT DISC BRAKE ROTOR - Fits 8/80-1/90 Aftermarket On Sale - Everyone gets the Discounted Price on this part. (an Additional Handling Charge of 16.25 is already included in price)  WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov	111.25
		084-02B-OEM	OEM FRONT DISC BRAKE ROTOR - Fits 8/80-1/90 OEM On Sale - Everyone gets the Discounted Price on this part.  WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov	129.95
		084-03A-O	AFTERMARKET DISC BRAKE PADS (ORGANIC) - Fits 9/75-1/90 40, 45, 55, 60 & 62 Series - Does both sides (Discontinued - Not available at this time)  WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov	0.00
		084-03A-OEM	OEM DISC BRAKE PADS (SEMI METALLIC) - Fits 9/75-1/90 40, 45, 55, 60 & 62 Series - Does both sides On Sale - Everyone gets the Discounted Price on this part.  WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov	88.16
		084-03A-SM	AFTERMARKET DISC BRAKE PADS (SEMI METALLIC) - Fits 9/75-1/90 40, 45, 55, 60 & 62 Series - Does both sides On Sale - Everyone gets the Discounted Price on this part.  WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov	39.00
		084-101A	DISC BRAKE BEARING KIT - Fits 7/70-9/75 FJ40/55 with the SOR disc brake conversion - Includes gaskets, shims, Birfield seals, spindle bushings, nuts and washers, lock tabs, hub gaskets, knuckle bearings, inner and outer wheel bearings and wheel seals - Does both sides. Purchase Locking Hub Kit separate. If you have Warn hubs order part #333-7309 Service Kit - No service kit available for WARN "barrel" style hubs 1958-9/75. Use (qty 2) 080-05 gaskets per hub instead On Sale - Everyone gets the Discounted Price on this part.  WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov	240.00

Specter is making ordering parts easy again with the Brake Spring Kit. By simply using one part number you can order all the brake springs and retainer clips for an entire axle. This kit includes four of each of the following part numbers: 081-16 Brake Spring, 081-17 Retainer Pin, 081-18 Retainer Clip, 081-19 Backing Plate Plugs, 018-20 Adjuster Plugs. Kit does both drums on one axle. FJ40/60/62/80 Series with rear brake drum parking brake, see #081-105

Buy	Quantity	Part Number	Description	Price	In Stock	Picture Click to Enlarge
		081-16-A-KIT	BRAKE SPRING KIT - Fits 1963-7/80 40, 45 and 55 Series with 2 1/2 inch wide shoes - Kit contains 4 brake springs, 4 brake shoe pins, 4 brake shoe hold down clips, 4 adjustment plugs, and 4 backing plate plugs. Kit does 1 axle. FJ40/60/62/80 Series with rear brake drum parking brake, see #081-105 On Sale - Everyone gets the Discounted Price on this part.  WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov	70.15
		081-16-B-KIT	BRAKE SPRING KIT - Fits 9/75-4/86 40 & 45 Series NON-USA VEHICLES WITH 3 INCH BRAKE DRUMS. Kit contains 4 brake springs, 4 brake shoe pins, 4 brake shoe hold down clips, 4 adjustment plugs, and 4 backing plate plugs. Kit does 1 axle. On Sale - Everyone gets the Discounted Price on this part.  WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov	140.00

Original Equipment Brake Adjusting Tool specially designed for adjusting the wheel cylinders on your Toyota Land Cruiser. This tools takes the pain out of adjusting your brakes and gets rid of those awkward screwdrivers that never really do the job right.

Buy	Quantity	Part Number	Description	Price	In Stock	Picture Click to Enlarge
		200-14	OEM BRAKE ADJUSTING TOOL - Fits all On Sale - Everyone gets the Discounted Price on this part.  WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov	17.20

Specter is making ordering parts easy again with the Brake Spring Kit. By simply using one part number you can order all the brake springs and retainer clips for an entire axle. This kit includes four of each of the following part numbers: 081-16 Brake Spring, 081-17 Retainer Pin, 081-18 Retainer Clip, 081-19 Backing Plate Plugs, 018-20 Adjuster Plugs. Kit does both drums on one axle.

Buy	Quantity	Part Number	Description	Price	In Stock	Picture Click to Enlarge
		081-16-B-KIT	BRAKE SPRING KIT - Fits 9/75-4/86 40 & 45 Series NON-USA VEHICLES WITH 3 INCH BRAKE DRUMS. Kit contains 4 brake springs, 4 brake shoe pins, 4 brake shoe hold down clips, 4 adjustment plugs, and 4 backing plate plugs. Kit does 1 axle. On Sale - Everyone gets the Discounted Price on this part.  WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov	140.00
		081-16-C-KIT	BRAKE SPRING KIT - Fits 8/80-11/84 60 SERIES NON-USA VEHICLES WITH 3 INCH BRAKE DRUMS. Kit contains 4 brake springs, 4 hold down pins, 8 brake shoe hold down cups, 4 brake shoe pins, 4 adjustment plugs, and 4 backing plate plugs. Kit does 1 axle. On Sale - Everyone gets the Discounted Price on this part.  WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov	140.00
		081-16-D-KIT	BRAKE SPRING KIT - Fits 11/84-8/87 60 SERIES NON-USA VEHICLES WITH 3 INCH BRAKE DRUMS. Kit contains 4 brake springs, 4 hold down springs, 8 spring hold down cups, 4 brake shoe pins, 4 adjustment plugs, 4 backing plate plugs. Kit does 1 axle. On Sale - Everyone gets the Discounted Price on this part.  WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov	140.00

Original Equipment Brake Adjusting Tool specially designed for adjusting the wheel cylinders on your Toyota Land Cruiser. This tools takes the pain out of adjusting your brakes and gets rid of those awkward screwdrivers that never really do the job right.

Buy	Quantity	Part Number	Description	Price	In Stock	Picture Click to Enlarge
		200-14	OEM BRAKE ADJUSTING TOOL - Fits all On Sale - Everyone gets the Discounted Price on this part.  WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov	17.20