Save yourself a headache, confirm your parts. Be sure the parts you are ordering will fit the Land Cruiser you drive. Ensure your production date falls within the timeframe noted on the “Fits” line in description for the parts you order. If you are not sure, give us a call, we’re here to help.
Fits 1963-9/73 - between January 1, 1963 and August 31, 1973 Fits 1963-1974 - between January 1, 1963 and December 31, 1974 |
All Tie Rod Ends come complete with boots, clamp rings, zerk fittings, cotter pins and nuts. All tie rod ends are heat treated. LH threads are #2, #26, and #35. RH threads are #1 and #25.
FJ60, FJ62 & FJ80 have two tie rod assemblies. The FJ60 and FJ62 have two tie rod ends and two rebuildable or replaceable drag link assemblies.
The use of lift kits, larger and wider (than stock) rims and tires cause tie rod ends wear quicker. The construction of the tie rod ends/drag link as shown in diagrams on tab one, shows a spring loaded ball and socket. As the spring loses its tension, the ball becomes loose in the socket, thus accelerating the wear factor. Bad dust boots, let dirt and grime in and the grease out, further shortening the life of the tie rod end and replacement of the tie rod end becomes necessary. Specter Off-Road's replacement tie rod ends are heat treated and come complete with OEM style boots, rings, nut zerk fitting and cotter pin. For individual listings, see part #094-01, #094-02, #094-25, #094-26 and #094-35.
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture (Click to Enlarge & Close) |
094-01-K-KIT |
60 SERIES TIE ROD END KIT -
Fits 8/80-1/90 FJ60/FJ62/HJ61/BJ/HJ Left Hand Drive (LHD). Comes with #094-01 tie rod end, #094-02 tie rod end, #094-25 tie rod end, and #094-26 tie rod end - Tie rod ends come complete with O.E.M. style boots, rings, nut, grease zerk fitting, and cotter pins - 4 piece set. Made in Japan. On Sale - Everyone gets the Discounted Price on this part. ![]() |
125.88 |
![]() |
![]() |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture (Click to Enlarge & Close) |
094-01-KRH-KIT |
RHD 60 SERIES TIE ROD END KIT -
Fits 8/80-1/90 FJ60/FJ62/HJ61/BJ/HJ RIGHT hand drive NON-USA Vehicles. Comes with #094-01 tie rod end, #094-02 tie rod end, #094-25 tie rod end, and #094-26 tie rod end - Tie rod ends come complete with O.E.M. style boots, rings, and cotter pins - 4 piece set. Made in Japan. On Sale - Everyone gets the Discounted Price on this part. ![]() |
125.88 |
![]() |
![]() |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture (Click to Enlarge & Close) |
094-09B |
STEERING ROD ROD CLAMP -
8/80-8/87 FJ60 - comes with bolt, nut & washer. Club Price with 15% Discount is $ 14.45 Click here for info about joining Club SOR ![]() |
17.00 |
![]() |
![]() |
||
094-09B-U |
USED OEM TIE ROD CLAMP -
Fits 8/80-8/87 60 Series. Does not come with hardware - purchase 094-10 & 094-11 separately if needed. (Not available at this time-Please call for availability) ![]() |
15.00 |
![]() |
![]() |
||
094-09B-U-KIT |
USED TIE ROD, RELAY ROD, AND DRAG LINK ROD CLAMP KIT -
Fits 8/80-8/87 FJ60 -Kit comes with total of 4 used OEM clamps with hardware - enough to do both front steering rods #12, & #29. On Sale - Everyone gets the Discounted Price on this part. PLEASE ALLOW 24 TO 72 HOURS TO PULL AND INSPECT ALL USED PARTS BEFORE SHIPMENT
|
49.00 |
![]() |
![]() |
||
094-09C |
STEERING ROD ROD CLAMP -
8/87-1/90 FJ62 - comes with bolt, nut & washer. Club Price with 15% Discount is $ 14.45 Click here for info about joining Club SOR ![]() |
17.00 |
![]() |
![]() |
||
094-09C-U |
U T/ROD CLAMP-
Fits 8/87-1/90 FJ62 USED (Not available at this time-Please call for availability) ![]() |
15.00 |
![]() |
![]() |
||
094-09C-U-KIT |
USED TIE ROD, RELAY ROD, AND DRAG LINK ROD CLAMP KIT -
Fits 8/87-1/90 FJ62 -Kit comes with total of 4 used OEM clamps with hardware - enough to do both front steering rods #12, & #29. On Sale - Everyone gets the Discounted Price on this part. PLEASE ALLOW 24 TO 72 HOURS TO PULL AND INSPECT ALL USED PARTS BEFORE SHIPMENT
|
49.00 |
![]() |
![]() |
Specter now offers 60 series relay rod end rebuild kits. For those of you with oversize tires and lots of off road miles that have helped wear your relay rods ends, now you can rebuild them for half the price of replacement ends. Kit comes complete with all the internal components
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture (Click to Enlarge & Close) |
094-61 |
RELAY ROD END KIT-
Fits 8/80-1/90 60 & 62 Series-Comes with all the internal components to rebuild #094-25K or #094-26K-Does NOT come with the tie rod end-Does one end. Adjustment & cotter pin installation required. Club Price with 15% Discount is $ 24.65 Click here for info about joining Club SOR ![]() |
29.00 |
![]() |
![]() |
||
094-27K |
60 RELY R/CLMP-**Special Order - NO Return
Fits 8/80-1/90 FJ60/FJ62 Club Price with 15% Discount is $ 14.45 Click here for info about joining Club SOR Special Order - NO Return ![]() |
17.00 |
![]() |
![]() |
||
094-27K-A |
A*T/R CLMPW/HW-
Fits 8/80-1/90 60/62 W/HARDW Club Price with 15% Discount is $ 14.45 Click here for info about joining Club SOR ![]() |
17.00 |
![]() |
![]() |
||
094-27K-U |
U RELAY CLAMP-
Fits 8/80-1/90 FJ60/62 USED On Sale - Everyone gets the Discounted Price on this part. PLEASE ALLOW 24 TO 72 HOURS TO PULL AND INSPECT ALL USED PARTS BEFORE SHIPMENT
|
10.00 |
![]() |
![]() |
||
094-27K-U-KIT |
USED TIE ROD, RELAY ROD, AND DRAG LINK ROD CLAMP KIT -
Fits 8/80-1/90 FJ60/FJ62 -Kit comes with total of 4 used OEM clamps with hardware - enough to do both front steering rods #12, & #29. On Sale - Everyone gets the Discounted Price on this part. PLEASE ALLOW 24 TO 72 HOURS TO PULL AND INSPECT ALL USED PARTS BEFORE SHIPMENT
|
49.00 |
![]() |
![]() |
SOR has heavy duty knuckle arms suitable for 60 and 62 Series vehicles. These arms are larger and stronger than those offered on vehicles sold in the USA. Great news for lifted vehicles with larger tires, rock crawlers and extreme off road use.
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture (Click to Enlarge & Close) |
094-23KHD-PR |
HEAVY DUTY 60/62 SERIES KNUCKLE ARM PAIR -
Fits 8/80 to 1/90 60 & 62 Series knuckle housings. Sold as a pair, right and left. On Sale - Everyone gets the Discounted Price on this part. ![]() |
160.00 |
![]() |
![]() |
How much is your time worth? A Pickle Fork is an essential tool for Tie Rod End replacement. It will save you time.
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture (Click to Enlarge & Close) |
200-15 |
PICKLE FORK -
TIE ROD END SEPERATOR On Sale - Everyone gets the Discounted Price on this part. ![]() |
22.00 |
![]() |
![]() |
Specter now offers you a variety of tie rod end boots. For those out there who do not need to replace your tie rod ends, but do find the boots to be destroyed you now have the choice of colors, styles and price.
#094-60 - Original equipment manufacture by TOYOTA. #094-60-A - Aftermarket tie rod dust boot is the same fit as OEM at a reduced price.#094-60-AP - Polyurethane boots do not use factory tie rod boot ring as in O.E.M. They are press fit and long lasting at an attractive price. Available in Black (B), and Red (R).
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture (Click to Enlarge & Close) |
094-60-OEM |
60 TIE RODBOOT-
Fits 8/80-1/90 FJ60/FJ62 Club Price with 15% Discount is $ 13.91 Click here for info about joining Club SOR ![]() |
16.37 |
![]() |
![]() |
||
094-60-A |
AFTERMARKET TIE ROD END DUST BOOT -
Fits 8/80-1/90 60 and 62 Series - Sold each On Sale - Everyone gets the Discounted Price on this part. ![]() |
3.50 |
![]() |
![]() |
||
094-60-APB |
AFTERMARKET BLACK POLYURETHANE TIE ROD END DUST BOOT -
Fits 8/80-1/90 60 and 62 Series - Press fit - NO tie rod dust ring required - Sold each Club Price with 15% Discount is $ 2.71 Click here for info about joining Club SOR ![]() |
3.19 |
![]() |
![]() |
||
094-60-APR |
AFTERMARKET RED POLYURETHANE TIE ROD END DUST BOOT -
Fits 8/80-1/90 60 and 62 Series - Press fit - NO tie rod dust ring required - Sold each Club Price with 15% Discount is $ 2.71 Click here for info about joining Club SOR ![]() |
3.19 |
![]() |
![]() |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture (Click to Enlarge & Close) |
094-23H-SPR |
HY STEER KNUCKLE ARM SPACER -
Fits 1/79-1984 FJ40/55 Hy Steer Knuckle Arms - Sold each. Also can be used with disc brake conversions using Toyota mini truck knuckle arms. Club Price with 15% Discount is $ 11.73 Click here for info about joining Club SOR ![]() |
13.80 |
![]() |
![]() |
Old Man Emu Steering Stabilizer is a direct replacement for the original equipment stabilizer. Bolts to the stock brackets. The OME unit is a twin tube design with a large diameter piston rod for more durability. Incorporates 9 stage valving for optimum performance in any terrain.
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture (Click to Enlarge & Close) |
284-26 |
OLD MAN EMU STEERING STABILIZER -
fits 8/80-1/90 60, 61, 62 Series On Sale - Everyone gets the Discounted Price on this part. ![]() |
120.00 |
![]() |
![]() |
This Explorer Pro-Comp Steering Stabilizer is designed to help control wandering. It protects your steering box and center arm assembly from wear by cushioning the impact of ruts, rocks and washboards. Use it in conjunction with the stock steering stabilizer on OEM steering systems, and alone on Saginaw Power Steering Conversions. This Explorer Pro-Comp Steering Stabilizer attaches to the steering tie rod and the axle housing. Easy to install, comes with mounting brackets, hardware and instructions. Fits: 1958 to 8/87 40, 45, 55 and 60 series. Order shock boot separately.
Buy |
Quantity |
Part Number |
Description |
Price |
In Stock |
Picture (Click to Enlarge & Close) |
Installation Instructions |
284-30 |
EXPLORER PRO COMP STEERING STABILIZER - Fits 1958 to 8/87 40/45/55 and 60 Series. Order shock boot separately see page 286 On Sale - Everyone gets the Discounted Price on this part. ![]() |
120.00 |
![]() |
![]() |
![]() |
These days most shock manufacturers sell the boots separately. Boots are optional, but highly recommended by SOR. Installing boots with your new shocks you will prolong the life of your shock by preventing rust build up on the chrome piston shaft which will damage or destroy the seal prematurely. Hot ticket...buy the boots. Sold each. Available in Black, Blue, Red, and Yellow.
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture (Click to Enlarge & Close) |
286-399-BLK |
6.50 |
![]() |
![]() |
|||
286-399-BLUE |
7.95 |
![]() |
![]() |
|||
286-399-RED |
6.50 |
![]() |
![]() |
|||
286-399-YEL |
7.95 |
![]() |
![]() |