Save yourself a headache, confirm your parts. Be sure the parts you are ordering will fit the Land Cruiser you drive. Ensure your production date falls within the timeframe noted on the “Fits” line in description for the parts you order. If you are not sure, give us a call, we’re here to help.
Fits 1963-9/73 - between January 1, 1963 and August 31, 1973 Fits 1963-1974 - between January 1, 1963 and December 31, 1974 |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture (Click to Enlarge & Close) |
113-100 |
SOR FACTORY REPRODUCTION HEADLINER-
Fits 1968-7/80 55 Series. Club Price with 15% Discount is $ 207.50 Click here for info about joining Club SOR (an Additional Handling Charge of 16.25 is already included in price) ![]() |
241.25 |
![]() |
![]() |
![]() |
![]() |
Headlight Assembly
![]() |
Hella Halogen Headlights produce more light than conventional Halogen sealed beams. Most Halogen sealed beams have an effective lighting range of 375 feet for the low beam and 550 feet for the high beams. The Hella European Headlights have an effective lighting range of over 650 feet for the low beam and a outrageous 1200 feet for the high beams! Now that’s bright!
#262-9700 - This Hella Halogen replacement headlight is highway legal and is D.O.T. approved. This headlight gives you all the advantages of halogen in a street legal housing with a replacable H4 bulb. Lamp is supplied with a 12 volt with a 55 watt low / 60 watt high beam H4 bulb. Sold each.
#262-9800* - Each Headlight contains the lamp unit, a 12 volt 55 watt low / 60 watt high light that uses an H4 Bulb and a Silicon Dustcover. Sold each.
High Performance Xenon Blue HB2 / 9003 / H4 12V 60/55W (parts #262-9733)
*WARNING: #262-9800 - This headlight is NOT certified as meeting any Federal Motor Vehicle Safety Standard. It may not lawfully be sold for use as headlamp on any motor vehicle used on the highway. It may be sold for use on off-road vehicles only. See #262-9700 for D.O.T style.
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture (Click to Enlarge & Close) |
262-9700 |
7 INCH HELLA D.O.T. LEGAL EUROPEAN HEADLIGHT-
7 inches in diameter-Fits 1958-8/87 with 12 volt-Light is 12 volts, with 55 watt low & 60 watt high H4 clear bulb-These headlights are D.O.T. legal for highway use-Sold each Club Price with 15% Discount is $ 66.85 Click here for info about joining Club SOR ![]() |
78.65 |
![]() |
![]() |
||
262-9733 |
HELLA HIGH PERFORMANCE XENON BLUE REPLACEMENT BULB -
Sold each (Discontinued - Not available at this time) ![]() |
0.00 |
![]() |
![]() |
||
262-9800 |
7 INCH HELLA EUROPEAN HEADLIGHT-
7 inches in diameter-Fits 1958-8/87 with 12 volt-Light is 12 volts, with 55 watt low & 60 watt high H4 blub-WARNING: This headlight is illegal for street or highway use because of the intensity of the light pattern, they are TOO bright. This headlight is NOT certified as meeting any Federal Motor Vehicle Safety Standard. It may NOT lawfully be sold for use as headlamp on any motor vehicle USED on the highway. It may be sold for use on off-road vehicles ONLY (see #262-9700 for D.O.T approved)-Sold each Club Price with 15% Discount is $ 63.75 Click here for info about joining Club SOR ![]() |
75.00 |
![]() |
![]() |
||
262-9733 |
HELLA HIGH PERFORMANCE XENON BLUE REPLACEMENT BULB -
Sold each (Discontinued - Not available at this time) ![]() |
0.00 |
![]() |
![]() |
![]() |
Body Parts Notice, Please Read
New sheet metal and fiberglass parts such as fenders, hoods and other body sections need to be test fit to the vehicle prior to sending the parts for paint and body work. It is industry standard that new parts such as these be fitted to the vehicle first before the finish is applied. Metal parts come painted with a rust prohibiter and require proper preparation before final paint is applied. Fiberglass parts come finished with a final gel coat and require proper preparation before final paint is applied. Proper preparation may include several coats of primer, sanding between coats and body filler before final paint is applied. SOR will not be responsible for paint and body work. |
![]() Reinforced Mounts
(click for large picture) |
![]() Detailed Panel Joints
(click for large picture) |
![]() More Mount Points
(click for large picture) |
![]() Integrated Vertical Support
(click for large picture) |
SOR has recently upgraded our Fiberglass Front Upper & Lower Fenders. Our Reproduction Fiberglass fenders now have the original chassis mounting tabs and brackets built into them. This makes installing these fenders much easier than other manufacturer’s aftermarket fenders that do not have these mounts.
These upper and lower Fiberglass Front Fenders and Fiberglass Front Lower Valance will never rot out again. As all 55 Series wagon owners know, new and good used parts are hard to find, so these are a great addition to our fiberglass product line. Drilling and minor trimming is required for side lights and emblems. Hardware must be purchased separately. All items come in a white gelcoat outer finish, ready for prep and paint. All items are UPSable.
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture (Click to Enlarge & Close) |
115-455-L |
LEFT UPPER FIBERGLASS FENDER-
Fits 1968-7/80 55 Series drivers side-New style now has original chassis mounting tabs and brackets. White gloss outer finish ready for prep and paint-Minor drilling & trimming are required-Accepts factory/stock components-Does NOT come with hardware On Sale - Everyone gets the Discounted Price on this part. (an Additional Handling Charge of 16.25 is already included in price) ![]() |
266.25 |
![]() |
![]() |
||
115-455-R |
RIGHT UPPER FIBERGLASS FENDER-
Fits 1968-7/80 55 Series passenger side-New style now has original chassis mounting tabs and brackets. White gloss outer finish ready for prep and paint-Minor drilling & trimming are required-Accepts factory/stock components-Does NOT come with hardware On Sale - Everyone gets the Discounted Price on this part. (an Additional Handling Charge of 16.25 is already included in price) ![]() |
266.25 |
![]() |
![]() |
![]() |
![]() |
The body molding that was originally installed on the pinchweld in the passenger doorway openings, is no longer available from Toyota. This aftermarket product is a metal reinforced welting with an attached tubular weatherstrip. Sold individually for one door. May require trimming to fit.
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture (Click to Enlarge & Close) |
113-95G-A |
FRONT DOOR BODY MOLDING-
AFTERMARKET-Fits 1968-7/80 FJ55 front door-Metal reinforced welting with attached tubular weatherstrip-May require trimming-Sold each for one door On Sale - Everyone gets the Discounted Price on this part. ![]() |
35.00 |
![]() |
![]() |
||
113-96G-A |
MID PASSENGER DOOR BODY MOLDING-
AFTERMARKET-Fits 1968-7/80 FJ55 mid passenger door-Metal reinforced welting with attached tubular weatherstrip-May require trimming-Sold each for one door On Sale - Everyone gets the Discounted Price on this part. ![]() |
35.00 |
![]() |
![]() |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture (Click to Enlarge & Close) |
113-80-A |
AFTERMARKET RIGHT CARGO WINDOW WEATHERSTRIP -
Fits 1968-7/80 FJ55. Does not have groove for chrome strip. (Discontinued - Not available at this time) ![]() |
0.00 |
![]() |
![]() |
||
113-81-A |
AFTERMARKET LEFT CARGO WINDOW WEATHERSTRIP -
Fits 1968-7/80 FJ55. Does not have groove for chrome strip. (Discontinued - Not available at this time) ![]() |
0.00 |
![]() |
![]() |