
70 & 75 Series Aftermarket Suspension
70 Series Aftermarket Suspension
For shackles, see page 288. Bushings are not included with springs, be sure to order separately see page 289 for bushing listings. See page 286 for extended shock listings. Springs are sold each.
Buy |
Quantity |
Part Number |
Description
|
Price |
*In Stock |
---|---|---|---|---|---|
287-700-F |
70 SERIES FRONT HEAVY DUTY LEAF SPRING-
2 inches to 2 1/2 inches of lift over stock height-Fits 1985-1993 FJ70 & BJ70-7 multi tapered leafs per stack-Sold each Club Price with 15% Discount is $ 271.25 Click here for info about joining Club SOR (an Additional Handling Charge of 16.25 is already included in price) ![]() |
316.25 |
![]() |
||
287-700-R |
70 SERIES REAR HEAVY DUTY LEAF SPRING-
2 inches to 2 1/2 inches of lift over stock height-Fits 1985-1993 FJ70 & BJ70-7 multi tapered leafs per stack-Sold each (Discontinued - Not available at this time) ![]() |
0.00 |
![]() |
Cad plated U-Bolts come with installation hardware in the size you need for your application. Sold each.
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
287-32 |
UBOLT 9/16 INCH X 6 3/4 INCH -
Cad plated - Comes with nut and washer - Sold each On Sale - Everyone gets the Discounted Price on this part. ![]() |
22.00 |
![]() |
![]() |
||
287-33 |
UBOLT 9/16 INCH X 7 3/4 INCH -
Cad plated - Comes with nut and washer - Sold each On Sale - Everyone gets the Discounted Price on this part. ![]() |
19.99 |
![]() |
![]() |
||
287-34A |
UBOLT 9/16 INCH X 9 1/4 INCH -
Cad plated - Comes with nut and washer - Sold each On Sale - Everyone gets the Discounted Price on this part. ![]() |
12.99 |
![]() |
![]() |
||
287-34B |
UBOLT 9/16 INCH X 10 3/4 INCH -
Cad plated - Comes with nut and washer - Sold each Club Price with 15% Discount is $ 16.99 Click here for info about joining Club SOR ![]() |
19.99 |
![]() |
![]() |
When a vehicle is lifted using an extended shackles, the steering caster angle changes from the stock -1 deg. angle. This creates undue wear on steering components (Knuckle Bearings, Tie Rod Ends, Steering Box). You may also notice your vehicle wander or follow grooves in the road (under inflated tires and other worn steering components will also cause wandering). This problem can be corrected by using Caster Spring Shims. In vehicles with V-8 and or automatic transmission conversions that require the rear drive shaft to be shortened, Caster Spring Shims can help relieve stress on U-joints by rotating the rear pumpkin up. Sold in pairs. If your suspension modification requires the use of spring shims, be sure to purchase leaf centering pins with extended heads to compensate for the additional space added between the spring and spring perch on the axle housing. See part number #287-36.
Shackle |
Shim |
1" - 1 1/2" longer than stock |
2.5 degree |
2" - 2 1/2" longer than stock |
4.0 degree |
3" & longer |
6.0 degree |
![]() This image shows the stock position of the axle housing. |
![]() When you raise a vehicle by adding longer shackles, the axle housing rotates downward changing the angle of the differential and steering components. Using the proper shim rotates the axle and steering components back to the correct position. |
![]() In the rear of the vehicle, extended shackles increase the operating angle of universal joints of the driveshaft. Use spring shims on rear leaf springs to rotate the front of the differential up and alleviate u-joint binding.
|
If your suspension modification requires the use of spring shims, be sure to purchase leaf centering pins with extended heads to compensate for the additional space added between the spring and spring perch on the axle housing. See part number #287-36. |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
287-82 |
2.5 DEGREE CASTER SPRING SHIM-
Sold in pairs. Does not fit with stock length center pins. See part number 287-36, order seperately if needed. On Sale - Everyone gets the Discounted Price on this part. ![]() |
21.59 |
![]() |
![]() |
||
287-84 |
4.0 DEGREE CASTER SPRING SHIM-
Sold in pairs. Does not fit with stock length center pins. See part number 287-36, order seperately if needed.. On Sale - Everyone gets the Discounted Price on this part. ![]() |
35.00 |
![]() |
![]() |
||
287-85 |
6.0 DEGREE CASTER SPRING SHIM-
Sold in pairs. Does not fit with stock length center pins. See part number 287-36, order seperately if needed. On Sale - Everyone gets the Discounted Price on this part. ![]() |
36.65 |
![]() |
![]() |

When using stock leaf springs, it's important and recommended that you change the Leaf Spring Centering Pin to one that has a longer head. Doing this will compensate for the additional thickness of the shim and limit the possibility of slippage. Sold in pairs.
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
287-36A |
FJ40 LEAF SPRING CENTERING PIN-
Fits 1958-8/78 FJ40 Front & Rear-Sold in pairs - See page 287-82,84 & 85 for Caster Spring shims On Sale - Everyone gets the Discounted Price on this part. ![]() |
21.00 |
![]() |
![]() |
||
287-36B |
FJ40 LEAF SPRING CENTERING PIN-
Fits 8/78-1984 FJ40 Front & Rear-Sold in pairs - See page 287-82,84 & 85 for Caster Spring shims On Sale - Everyone gets the Discounted Price on this part. ![]() |
15.00 |
![]() |
![]() |
For those of you that have lifted vehicles or spring over vehicles with the need for longer axle bumpstops, Specter has them for you. We also know many of you out there build custom creations, so we carry an assortment of different sized bumpstops for all your needs. We even carry an adjustable bumpstop that adjusts from 1 inch - 2 1/2 inches, see #287-17. Available in black. Sold in pairs.
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
287-15 |
4 1/2 INCH BUMP STOPS -**Special Order - NO Return
Black Urethane-4 1/2 inches tall-Sold in pairs. Club Price with 15% Discount is $ 91.80 Click here for info about joining Club SOR Special Order - NO Return ![]() |
108.00 |
![]() |
![]() |
||
287-16 |
2 1/2 INCH BUMP STOPS -**Special Order - NO Return
Black Urethane-2 1/2 inches tall-Sold in pairs. On Sale - Everyone gets the Discounted Price on this part. Special Order - NO Return ![]() |
65.00 |
![]() |
![]() |
||
287-17 |
ADJUSTABLE BUMP STOPS -**Special Order - NO Return
Black Urethane-Adjusts from 1 inch to 2 1/2 inches tall-Sold in pairs. On Sale - Everyone gets the Discounted Price on this part. Special Order - NO Return ![]() |
25.00 |
![]() |
![]() |
||
287-18 |
BULLET BUMP STOPS -**Special Order - NO Return
Black Urethane-1 9/16 inches tall-Sold in pairs. Club Price with 15% Discount is $ 11.90 Click here for info about joining Club SOR Special Order - NO Return ![]() |
14.00 |
![]() |
![]() |
||
287-19 |
FLAT BUMP STOPS -**Special Order - NO Return
Black Urethane-11/16 inches tall-Sold in pairs. Club Price with 15% Discount is $ 12.75 Click here for info about joining Club SOR Special Order - NO Return ![]() |
15.00 |
![]() |
![]() |
Heavy Duty Spring Perches are made from 1/4 inch thick steel.
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
287-14 |
HEAVY DUTY SPRING PERCH-**Special Order - NO Return
3 inches x 5 inches long-Sold in pairs On Sale - Everyone gets the Discounted Price on this part. Special Order - NO Return ![]() |
50.00 |
![]() |
![]() |
75 Series Aftermarket Suspension
Specter now offers a Lift Kit for 75 Series Land Cruisers. The kits offer approximately 2 inch - 2 1/2 inch of lift over stock height. The front and rear Leaf Springs feature eight multi leafs per stack. These kits include Front and Rear Leaf Springs, Shocks, U-bolts, and Bushings. Springs are sold each.
Buy |
Quantity |
Part Number |
Description
|
Price |
*In Stock |
---|---|---|---|---|---|
287-75A-HD-KIT |
75 SERIES SOR LIFT KIT-
Heavy Duty-2 inches to 2 1/2 inches of lift over stock height-Fits 11/84-1/90 75 Series with rear drum brakes-Comes with Leaf Springs (qty 4), Shocks (qty 4), Bushings (qty 24), and U-Bolts with washers & nuts (qty 8)-Does NOT come with shock boots, see page 286 (Discontinued - Not available at this time) (an Additional Handling Charge of 80.00 is already included in price) ![]() |
80.00 |
![]() |
||
287-75A-LT-KIT |
75 SERIES SOR LIFT KIT-
Light Duty-2 inches to 2 1/2 inches of lift over stock height-Fits 11/84-1/90 75 Series with rear drum brakes-Comes with Leaf Springs (qty 4), Shocks (qty 4), Bushings (qty 24), and U-Bolts with washers & nuts (qty 8)-Does NOT come with shock boots, see page 286 On Sale - Everyone gets the Discounted Price on this part. (an Additional Handling Charge of 16.25 is already included in price) ![]() |
1726.25 |
![]() |
||
287-75B-HD-KIT |
75 SERIES SOR LIFT KIT-
Heavy Duty-2 inches to 2 1/2 inches of lift over stock height-Fits 1/90-9/99 75 Series with rear disc brakes-Comes with Leaf Springs (qty 4), Shocks (qty 4), Bushings (qty 24), and U-Bolts with washers & nuts (qty 8)-Does NOT come with shock boots, see page 286 (Discontinued - Not available at this time) ![]() |
0.00 |
![]() |
||
287-75B-LT-KIT |
75 SERIES SOR LIFT KIT-
Light Duty-2 inches to 2 1/2 inches of lift over stock height-Fits 1/90-9/99 75 Series with rear disc brakes-Comes with Leaf Springs (qty 4), Shocks (qty 4), Bushings (qty 24), and U-Bolts with washers & nuts (qty 8)-Does NOT come with shock boots, see page 286 On Sale - Everyone gets the Discounted Price on this part. (an Additional Handling Charge of 80.00 is already included in price) ![]() |
1930.00 |
![]() |
Cad plated U-Bolts come with installation hardware in the size you need for your application. Sold each.
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
287-32 |
UBOLT 9/16 INCH X 6 3/4 INCH -
Cad plated - Comes with nut and washer - Sold each On Sale - Everyone gets the Discounted Price on this part. ![]() |
22.00 |
![]() |
![]() |
||
287-33 |
UBOLT 9/16 INCH X 7 3/4 INCH -
Cad plated - Comes with nut and washer - Sold each On Sale - Everyone gets the Discounted Price on this part. ![]() |
19.99 |
![]() |
![]() |
||
287-34A |
UBOLT 9/16 INCH X 9 1/4 INCH -
Cad plated - Comes with nut and washer - Sold each On Sale - Everyone gets the Discounted Price on this part. ![]() |
12.99 |
![]() |
![]() |
||
287-34B |
UBOLT 9/16 INCH X 10 3/4 INCH -
Cad plated - Comes with nut and washer - Sold each Club Price with 15% Discount is $ 16.99 Click here for info about joining Club SOR ![]() |
19.99 |
![]() |
![]() |
When a vehicle is lifted using an extended shackles, the steering caster angle changes from the stock -1 deg. angle. This creates undue wear on steering components (Knuckle Bearings, Tie Rod Ends, Steering Box). You may also notice your vehicle wander or follow grooves in the road (under inflated tires and other worn steering components will also cause wandering). This problem can be corrected by using Caster Spring Shims. In vehicles with V-8 and or automatic transmission conversions that require the rear drive shaft to be shortened, Caster Spring Shims can help relieve stress on U-joints by rotating the rear pumpkin up. Sold in pairs. If your suspension modification requires the use of spring shims, be sure to purchase leaf centering pins with extended heads to compensate for the additional space added between the spring and spring perch on the axle housing. See part number #287-36.
Shackle |
Shim |
1" - 1 1/2" longer than stock |
2.5 degree |
2" - 2 1/2" longer than stock |
4.0 degree |
3" & longer |
6.0 degree |
![]() This image shows the stock position of the axle housing. |
![]() When you raise a vehicle by adding longer shackles, the axle housing rotates downward changing the angle of the differential and steering components. Using the proper shim rotates the axle and steering components back to the correct position. |
![]() In the rear of the vehicle, extended shackles increase the operating angle of universal joints of the driveshaft. Use spring shims on rear leaf springs to rotate the front of the differential up and alleviate u-joint binding.
|
If your suspension modification requires the use of spring shims, be sure to purchase leaf centering pins with extended heads to compensate for the additional space added between the spring and spring perch on the axle housing. See part number #287-36. |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
287-82 |
2.5 DEGREE CASTER SPRING SHIM-
Sold in pairs. Does not fit with stock length center pins. See part number 287-36, order seperately if needed. On Sale - Everyone gets the Discounted Price on this part. ![]() |
21.59 |
![]() |
![]() |
||
287-84 |
4.0 DEGREE CASTER SPRING SHIM-
Sold in pairs. Does not fit with stock length center pins. See part number 287-36, order seperately if needed.. On Sale - Everyone gets the Discounted Price on this part. ![]() |
35.00 |
![]() |
![]() |
||
287-85 |
6.0 DEGREE CASTER SPRING SHIM-
Sold in pairs. Does not fit with stock length center pins. See part number 287-36, order seperately if needed. On Sale - Everyone gets the Discounted Price on this part. ![]() |
36.65 |
![]() |
![]() |

When using stock leaf springs, it's important and recommended that you change the Leaf Spring Centering Pin to one that has a longer head. Doing this will compensate for the additional thickness of the shim and limit the possibility of slippage. Sold in pairs.
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
287-36A |
FJ40 LEAF SPRING CENTERING PIN-
Fits 1958-8/78 FJ40 Front & Rear-Sold in pairs - See page 287-82,84 & 85 for Caster Spring shims On Sale - Everyone gets the Discounted Price on this part. ![]() |
21.00 |
![]() |
![]() |
||
287-36B |
FJ40 LEAF SPRING CENTERING PIN-
Fits 8/78-1984 FJ40 Front & Rear-Sold in pairs - See page 287-82,84 & 85 for Caster Spring shims On Sale - Everyone gets the Discounted Price on this part. ![]() |
15.00 |
![]() |
![]() |
For those of you that have lifted vehicles or spring over vehicles with the need for longer axle bumpstops, Specter has them for you. We also know many of you out there build custom creations, so we carry an assortment of different sized bumpstops for all your needs. We even carry an adjustable bumpstop that adjusts from 1 inch - 2 1/2 inches, see #287-17. Available in black. Sold in pairs.
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
287-15 |
4 1/2 INCH BUMP STOPS -**Special Order - NO Return
Black Urethane-4 1/2 inches tall-Sold in pairs. Club Price with 15% Discount is $ 91.80 Click here for info about joining Club SOR Special Order - NO Return ![]() |
108.00 |
![]() |
![]() |
||
287-16 |
2 1/2 INCH BUMP STOPS -**Special Order - NO Return
Black Urethane-2 1/2 inches tall-Sold in pairs. On Sale - Everyone gets the Discounted Price on this part. Special Order - NO Return ![]() |
65.00 |
![]() |
![]() |
||
287-17 |
ADJUSTABLE BUMP STOPS -**Special Order - NO Return
Black Urethane-Adjusts from 1 inch to 2 1/2 inches tall-Sold in pairs. On Sale - Everyone gets the Discounted Price on this part. Special Order - NO Return ![]() |
25.00 |
![]() |
![]() |
||
287-18 |
BULLET BUMP STOPS -**Special Order - NO Return
Black Urethane-1 9/16 inches tall-Sold in pairs. Club Price with 15% Discount is $ 11.90 Click here for info about joining Club SOR Special Order - NO Return ![]() |
14.00 |
![]() |
![]() |
||
287-19 |
FLAT BUMP STOPS -**Special Order - NO Return
Black Urethane-11/16 inches tall-Sold in pairs. Club Price with 15% Discount is $ 12.75 Click here for info about joining Club SOR Special Order - NO Return ![]() |
15.00 |
![]() |
![]() |
Heavy Duty Spring Perches are made from 1/4 inch thick steel.
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
287-14 |
HEAVY DUTY SPRING PERCH-**Special Order - NO Return
3 inches x 5 inches long-Sold in pairs On Sale - Everyone gets the Discounted Price on this part. Special Order - NO Return ![]() |
50.00 |
![]() |
![]() |
U-Bolts, Caster Shims, Bump Stops & Perches
Cad plated U-Bolts come with installation hardware in the size you need for your application. Sold each.
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
287-32 |
UBOLT 9/16 INCH X 6 3/4 INCH -
Cad plated - Comes with nut and washer - Sold each On Sale - Everyone gets the Discounted Price on this part. ![]() |
22.00 |
![]() |
![]() |
||
287-33 |
UBOLT 9/16 INCH X 7 3/4 INCH -
Cad plated - Comes with nut and washer - Sold each On Sale - Everyone gets the Discounted Price on this part. ![]() |
19.99 |
![]() |
![]() |
||
287-34A |
UBOLT 9/16 INCH X 9 1/4 INCH -
Cad plated - Comes with nut and washer - Sold each On Sale - Everyone gets the Discounted Price on this part. ![]() |
12.99 |
![]() |
![]() |
||
287-34B |
UBOLT 9/16 INCH X 10 3/4 INCH -
Cad plated - Comes with nut and washer - Sold each Club Price with 15% Discount is $ 16.99 Click here for info about joining Club SOR ![]() |
19.99 |
![]() |
![]() |
When a vehicle is lifted using an extended shackles, the steering caster angle changes from the stock -1 deg. angle. This creates undue wear on steering components (Knuckle Bearings, Tie Rod Ends, Steering Box). You may also notice your vehicle wander or follow grooves in the road (under inflated tires and other worn steering components will also cause wandering). This problem can be corrected by using Caster Spring Shims. In vehicles with V-8 and or automatic transmission conversions that require the rear drive shaft to be shortened, Caster Spring Shims can help relieve stress on U-joints by rotating the rear pumpkin up. Sold in pairs. If your suspension modification requires the use of spring shims, be sure to purchase leaf centering pins with extended heads to compensate for the additional space added between the spring and spring perch on the axle housing. See part number #287-36.
Shackle |
Shim |
1" - 1 1/2" longer than stock |
2.5 degree |
2" - 2 1/2" longer than stock |
4.0 degree |
3" & longer |
6.0 degree |
![]() This image shows the stock position of the axle housing. |
![]() When you raise a vehicle by adding longer shackles, the axle housing rotates downward changing the angle of the differential and steering components. Using the proper shim rotates the axle and steering components back to the correct position. |
![]() In the rear of the vehicle, extended shackles increase the operating angle of universal joints of the driveshaft. Use spring shims on rear leaf springs to rotate the front of the differential up and alleviate u-joint binding.
|
If your suspension modification requires the use of spring shims, be sure to purchase leaf centering pins with extended heads to compensate for the additional space added between the spring and spring perch on the axle housing. See part number #287-36. |
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
287-82 |
2.5 DEGREE CASTER SPRING SHIM-
Sold in pairs. Does not fit with stock length center pins. See part number 287-36, order seperately if needed. On Sale - Everyone gets the Discounted Price on this part. ![]() |
21.59 |
![]() |
![]() |
||
287-84 |
4.0 DEGREE CASTER SPRING SHIM-
Sold in pairs. Does not fit with stock length center pins. See part number 287-36, order seperately if needed.. On Sale - Everyone gets the Discounted Price on this part. ![]() |
35.00 |
![]() |
![]() |
||
287-85 |
6.0 DEGREE CASTER SPRING SHIM-
Sold in pairs. Does not fit with stock length center pins. See part number 287-36, order seperately if needed. On Sale - Everyone gets the Discounted Price on this part. ![]() |
36.65 |
![]() |
![]() |

When using stock leaf springs, it's important and recommended that you change the Leaf Spring Centering Pin to one that has a longer head. Doing this will compensate for the additional thickness of the shim and limit the possibility of slippage. Sold in pairs.
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
287-36A |
FJ40 LEAF SPRING CENTERING PIN-
Fits 1958-8/78 FJ40 Front & Rear-Sold in pairs - See page 287-82,84 & 85 for Caster Spring shims On Sale - Everyone gets the Discounted Price on this part. ![]() |
21.00 |
![]() |
![]() |
||
287-36B |
FJ40 LEAF SPRING CENTERING PIN-
Fits 8/78-1984 FJ40 Front & Rear-Sold in pairs - See page 287-82,84 & 85 for Caster Spring shims On Sale - Everyone gets the Discounted Price on this part. ![]() |
15.00 |
![]() |
![]() |
For those of you that have lifted vehicles or spring over vehicles with the need for longer axle bumpstops, Specter has them for you. We also know many of you out there build custom creations, so we carry an assortment of different sized bumpstops for all your needs. We even carry an adjustable bumpstop that adjusts from 1 inch - 2 1/2 inches, see #287-17. Available in black. Sold in pairs.
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
287-15 |
4 1/2 INCH BUMP STOPS -**Special Order - NO Return
Black Urethane-4 1/2 inches tall-Sold in pairs. Club Price with 15% Discount is $ 91.80 Click here for info about joining Club SOR Special Order - NO Return ![]() |
108.00 |
![]() |
![]() |
||
287-16 |
2 1/2 INCH BUMP STOPS -**Special Order - NO Return
Black Urethane-2 1/2 inches tall-Sold in pairs. On Sale - Everyone gets the Discounted Price on this part. Special Order - NO Return ![]() |
65.00 |
![]() |
![]() |
||
287-17 |
ADJUSTABLE BUMP STOPS -**Special Order - NO Return
Black Urethane-Adjusts from 1 inch to 2 1/2 inches tall-Sold in pairs. On Sale - Everyone gets the Discounted Price on this part. Special Order - NO Return ![]() |
25.00 |
![]() |
![]() |
||
287-18 |
BULLET BUMP STOPS -**Special Order - NO Return
Black Urethane-1 9/16 inches tall-Sold in pairs. Club Price with 15% Discount is $ 11.90 Click here for info about joining Club SOR Special Order - NO Return ![]() |
14.00 |
![]() |
![]() |
||
287-19 |
FLAT BUMP STOPS -**Special Order - NO Return
Black Urethane-11/16 inches tall-Sold in pairs. Club Price with 15% Discount is $ 12.75 Click here for info about joining Club SOR Special Order - NO Return ![]() |
15.00 |
![]() |
![]() |
Heavy Duty Spring Perches are made from 1/4 inch thick steel.
Buy |
Quantity |
Part Number |
Description
|
Price |
In Stock |
Picture Click
to Enlarge |
---|---|---|---|---|---|---|
287-14 |
HEAVY DUTY SPRING PERCH-**Special Order - NO Return
3 inches x 5 inches long-Sold in pairs On Sale - Everyone gets the Discounted Price on this part. Special Order - NO Return ![]() |
50.00 |
![]() |
![]() |