Upgrade and renew your factory rear seats to look like new with SOR's Deluxe Vinyl Rear Jump Seat Covers. These restoration quality seat covers are sewn to factory patterns using OEM dimensions. Made of high quality marine grade Naugahyde vinyl to match your factory interior. Sewn with durable nylon thread, top stitched with matching finished welted seams. SOR's Deluxe Vinyl Rear Jump Seat Covers are made to fit like a glove, tailored to fit your year and model. Manufactured by Specter so you know they fit! Available for all years, and models, even Non-USA Land Cruisers.

1958-1978 models are available in Dark Charcoal Gray Marine vinyl, and 1979-1984 models are available in Light Charcoal Gray Marine vinyl to match your factory interior. Seat covers are sold in complete sets for both rear jump seats, two bottoms and two backs. Remember, your upholstery will only be as good as the base you have to work with, most likely your foam is as old as the worn upholstery you are replacing. New foam padding will greatly improve the comfort and support of your ride. SOR's upholstery sets are designed to fit properly with new foams installed so the new seat covers have a snug, tailored fit. If you use your old worn foams the new seat covers may be loose. Be sure to read information on SOR's high density foam padding. So do the job right, replace the seat foams, paint the seat frames, paint the metal back panels and replace the hardware on the metal back panels. You will be impressed how nice your finished upholstered seats look. Increase the value of your Cruiser and restore your interior to look like brand new.

• Front Seat Covers are found on page 310. They’re tailor made to match our Jump Seat covers. Complete kits are sold that include hog rings and with or without seat foam. See page 118 for all stock front and rear seat assembly parts that you may need.

Click to enlarge

Color Matching Note Please click and read

Need an instruction sheet? Click here

Anytime you reupholster your seats it's crucial to replace the old worn out foam or especially older models that used the horsehair type padding. New padding is a 'must do'. SOR's Upholstery Seat Covers are designed to fit tight with new updated foams. Technology is always moving forward allowing us to offer you a better quality replacement seat foam padding. SOR's Jump Seat Foams are manufactured from 2 inch Qualex commercial grade high resolution seat foam. Each formed piece is custom designed to fit for your application. Sold each.

If you are restoring your Cruiser take the time to do the job all the way. After you remove the old seat covers, sand blast and repaint the frames, but before you install new padding and upholstery, don't forget the small details that really make the difference. Installing new hardware really finishes off the job. Now SOR has made it easy for you to purchase a kit that replaces the hardware for the rear metal panels on the factory jump seats. One kit does one jump seat

Increase the value of your Land Cruiser and restore your interior to look like brand new. Don't forget the details that finish off the job and make the interior look like it did when it rolled off the production line. After you replace the upholstery and the seat foams, inspect and replace all the old worn parts. SOR stocks all the replacement parts you need to replace your straps, twists, bumpers, and hardware. You will be impressed with the results.

SOR's reproduction rear jump seat straps are constructed from heavy weight webbing material that compare to the original factory straps that have been discontinued by Toyota.

These straps feature metal tips and eyelets. These straps are restoration quality. Sold in pairs in choices of colors.

Upgrade and renew your factory rear seats to look like new with SOR's Deluxe Vinyl Rear Jump Seat Covers. These restoration quality seat covers are sewn to factory patterns using OEM dimensions. Made of high quality marine grade Naugahyde vinyl to match your factory interior. Sewn with durable nylon thread, top stitched with matching finished welted seams. SOR's Deluxe Vinyl Rear Jump Seat Covers are made to fit like a glove, tailored to fit your year and model. Manufactured by Specter so you know they fit! Available for all years, and models, even Non-USA Land Cruisers.

1958-1978 models are available in Dark Charcoal Gray Marine vinyl, and 1979-1984 models are available in Light Charcoal Gray Marine vinyl to match your factory interior. Seat covers are sold in complete sets for both rear jump seats, two bottoms and two backs. Remember, your upholstery will only be as good as the base you have to work with, most likely your foam is as old as the worn upholstery you are replacing. New foam padding will greatly improve the comfort and support of your ride. SOR's upholstery sets are designed to fit properly with new foams installed so the new seat covers have a snug, tailored fit. If you use your old worn foams the new seat covers may be loose. Be sure to read information on SOR's high density foam padding. So do the job right, replace the seat foams, paint the seat frames, paint the metal back panels and replace the hardware on the metal back panels. You will be impressed how nice your finished upholstered seats look. Increase the value of your Cruiser and restore your interior to look like brand new.

• Front Seat Covers are found on page 310. They’re tailor made to match our Jump Seat covers. Complete kits are sold that include hog rings and with or without seat foam. See page 118 for all stock front and rear seat assembly parts that you may need.

Click to enlarge

Color Matching Note Please click and read

Need an instruction sheet? Click here

Anytime you reupholster your seats it's crucial to replace the old worn out foam or especially older models that used the horsehair type padding. New padding is a 'must do'. SOR's Upholstery Seat Covers are designed to fit tight with new updated foams. Technology is always moving forward allowing us to offer you a better quality replacement seat foam padding. SOR's Jump Seat Foams are manufactured from 2 inch Qualex commercial grade high resolution seat foam. Each formed piece is custom designed to fit for your application. Sold each.

If you are restoring your Cruiser take the time to do the job all the way. After you remove the old seat covers, sand blast and repaint the frames, but before you install new padding and upholstery, don't forget the small details that really make the difference. Installing new hardware really finishes off the job. Now SOR has made it easy for you to purchase a kit that replaces the hardware for the rear metal panels on the factory jump seats. One kit does one jump seat

Increase the value of your Land Cruiser and restore your interior to look like brand new. Don't forget the details that finish off the job and make the interior look like it did when it rolled off the production line. After you replace the upholstery and the seat foams, inspect and replace all the old worn parts. SOR stocks all the replacement parts you need to replace your straps, twists, bumpers, and hardware. You will be impressed with the results.

SOR's reproduction rear jump seat straps are constructed from heavy weight webbing material that compare to the original factory straps that have been discontinued by Toyota.

These straps feature metal tips and eyelets. These straps are restoration quality. Sold in pairs in choices of colors.

(click for large picture)

Upgrade and renew your factory rear seats to look like new with SOR's Deluxe Vinyl Rear Jump Seat Covers. These restoration quality seat covers are sewn to factory patterns using OEM dimensions. Made of high quality marine grade Naugahyde vinyl to match your factory interior. Sewn with durable nylon thread, top stitched with matching finished welted seams. SOR's Deluxe Vinyl Rear Jump Seat Covers are made to fit like a glove, tailored to fit your year and model. Manufactured by Specter so you know they fit! Available for all years, and models, even Non-USA Land Cruisers.

1958-1978 models are available in Dark Charcoal Gray Marine vinyl, and 1979-1984 models are available in Light Charcoal Gray Marine vinyl to match your factory interior. Seat covers are sold in complete sets for both rear jump seats, two bottoms and two backs. Remember, your upholstery will only be as good as the base you have to work with, most likely your foam is as old as the worn upholstery you are replacing. New foam padding will greatly improve the comfort and support of your ride. SOR's upholstery sets are designed to fit properly with new foams installed so the new seat covers have a snug, tailored fit. If you use your old worn foams the new seat covers may be loose. Be sure to read information on SOR's high density foam padding. So do the job right, replace the seat foams, paint the seat frames, paint the metal back panels and replace the hardware on the metal back panels. You will be impressed how nice your finished upholstered seats look. Increase the value of your Cruiser and restore your interior to look like brand new.

• Front Seat Covers are found on page 310. They’re tailor made to match our Jump Seat covers. Complete kits are sold that include hog rings and with or without seat foam. See page 118 for all stock front and rear seat assembly parts that you may need.

Color Matching Note Please click and read

Need an instruction sheet? Click here

9/73-4/78 40 Series

4/78-1984 40 Series

Anytime you reupholster your seats it's crucial to replace the old worn out foam or especially older models that used the horsehair type padding. New padding is a 'must do'. SOR's Upholstery Seat Covers are designed to fit tight with new updated foams. Technology is always moving forward allowing us to offer you a better quality replacement seat foam padding. SOR's Jump Seat Foams are manufactured from 2 inch Qualex commercial grade high resolution seat foam. Each formed piece is custom designed to fit for your application. Sold each.

If you are restoring your Cruiser take the time to do the job all the way. After you remove the old seat covers, sand blast and repaint the frames, but before you install new padding and upholstery, don't forget the small details that really make the difference. Installing new hardware really finishes off the job. Now SOR has made it easy for you to purchase a kit that replaces the hardware for the rear metal panels on the factory jump seats. One kit does one jump seat

Increase the value of your Land Cruiser and restore your interior to look like brand new. Don't forget the details that finish off the job and make the interior look like it did when it rolled off the production line. After you replace the upholstery and the seat foams, inspect and replace all the old worn parts. SOR stocks all the replacement parts you need to replace your straps, twists, bumpers, and hardware. You will be impressed with the results.

SOR's reproduction rear jump seat straps are constructed from heavy weight webbing material that compare to the original factory straps that have been discontinued by Toyota.

These straps feature metal tips and eyelets. These straps are restoration quality. Sold in pairs in choices of colors.

Upgrade and renew your factory rear seats to look like new with SOR's Deluxe Vinyl Rear Jump Seat Covers. These restoration quality seat covers are sewn to factory patterns using OEM dimensions. Made of high quality marine grade Naugahyde vinyl to match your factory interior. Sewn with durable nylon thread, top stitched with matching finished welted seams. SOR's Deluxe Vinyl Rear Jump Seat Covers are made to fit like a glove, tailored to fit your year and model. Manufactured by Specter so you know they fit! Available for all years, and models, even Non-USA Land Cruisers.

1958-1978 models are available in Dark Charcoal Gray Marine vinyl, and 1979-1984 models are available in Light Charcoal Gray Marine vinyl to match your factory interior. Seat covers are sold in complete sets for both rear jump seats, two bottoms and two backs. Remember, your upholstery will only be as good as the base you have to work with, most likely your foam is as old as the worn upholstery you are replacing. New foam padding will greatly improve the comfort and support of your ride. SOR's upholstery sets are designed to fit properly with new foams installed so the new seat covers have a snug, tailored fit. If you use your old worn foams the new seat covers may be loose. Be sure to read information on SOR's high density foam padding. So do the job right, replace the seat foams, paint the seat frames, paint the metal back panels and replace the hardware on the metal back panels. You will be impressed how nice your finished upholstered seats look. Increase the value of your Cruiser and restore your interior to look like brand new.

• Front Seat Covers are found on page 310. They’re tailor made to match our Jump Seat covers. Complete kits are sold that include hog rings and with or without seat foam. See page 118 for all stock front and rear seat assembly parts that you may need.

Color Matching Note Please click and read

Need an instruction sheet? Click here

9/73-4/78 40 Series

4/78-1984 40 Series

Anytime you reupholster your seats it's crucial to replace the old worn out foam or especially older models that used the horsehair type padding. New padding is a 'must do'. SOR's Upholstery Seat Covers are designed to fit tight with new updated foams. Technology is always moving forward allowing us to offer you a better quality replacement seat foam padding. SOR's Jump Seat Foams are manufactured from 2 inch Qualex commercial grade high resolution seat foam. Each formed piece is custom designed to fit for your application. Sold each.

Upgrade and renew your factory rear seats to look like new with SOR's Deluxe Vinyl Rear Non-USA Jump Seat Covers.

Need an instruction sheet? Click here