Page 044 –

FJ40, FJ55 and FJ60 Land Cruiser Intake and Exhaust Manifolds, 1958-8/87

1958-8/87 Manifolds

SOR Graphite Manifold Gaskets

SOR has developed a superior Graphite Manifold Gasket for your Land Cruiser engine. We believe that SOR's Graphite Manifold Gasket is the highest quality graphite type gasket you can get for your Land Cruiser. Our exclusive material has metal reinforcement embedded into the graphite matrix to make the material more durable than other manufacturer's graphite gaskets. SOR Graphite Manifold Gaskets are made from a unique thick graphite material that is about 1/8" thick and is designed to be squeezed during installation. This squeeze helps seal manifolds and headers that are not perfectly flat. Resists leaks due to warping. This graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Suggested fastener torque of 20-25 ft lb.

Buy Quantity Part Number Description Price In Stock
Click for Zoom
Add to Cart 044-01A-SOR SOR GRAPHITE MANIFOLD GASKET
Fits 1958-1967 Siamese port gas engine. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$12.00
SOR GRAPHITE MANIFOLD GASKET
Fits 1958-1967 Siamese port gas engine. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
Back to Top
SOR Clearance Item
Buy Quantity Part Number Description Price In Stock
Click for Zoom
Add to Cart 044-20N-U-101 U INTAKEMANIFLD
Fits 1968 ONLY-INTAKE USED
On Sale - Everyone gets the Discounted Price on this part.
(a Refundable Core Charge of 16.25 is already included in price)
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$400.00
U INTAKEMANIFLD
Fits 1968 ONLY-INTAKE USED
On Sale - Everyone gets the Discounted Price on this part.
(a Refundable Core Charge of 16.25 is already included in price)
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
Back to Top

Graphite Manifold Gaskets

SOR has developed a superior Graphite Manifold Gasket for your Land Cruiser engine. We believe that SOR's Graphite Manifold Gasket is the highest quality graphite type gasket you can get for your Land Cruiser. Our exclusive material has metal reinforcement embedded into the graphite matrix to make the material more durable than other manufacturer's graphite gaskets. SOR Graphite Manifold Gaskets are made from a unique thick graphite material that is about 1/8" thick and is designed to be squeezed during installation. This squeeze helps seal manifolds and headers that are not perfectly flat. Resists leaks due to warping. This graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Suggested fastener torque of 20-25 ft lb.

Buy Quantity Part Number Description Price In Stock
Click for Zoom
Add to Cart 044-01B-SOR SOR GRAPHITE MANIFOLD GASKET
Fits 1968-1974 F gas engine. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
(an Additional Handling Charge of 16.25 is already included in price)
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$71.25
SOR GRAPHITE MANIFOLD GASKET
Fits 1968-1974 F gas engine. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
(a Refundable Core Charge of 16.25 is already included in price)
Add to Cart 044-01B-PAIR PAIR SOR GRAPHITE MANIFOLD GASKET SET
Fits 1968-1974 F gas engine. SAVE $$ when you buy 2 gaskets. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
(an Additional Handling Charge of 16.25 is already included in price)
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$96.25
PAIR SOR GRAPHITE MANIFOLD GASKET SET
Fits 1968-1974 F gas engine. SAVE $$ when you buy 2 gaskets. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
(a Refundable Core Charge of 16.25 is already included in price)
Add to Cart 044-01BSORBLEM SOR GRAPHITE MANIFOLD GASKET
Fits 1968-1974 F gas engine. This a clearance item - These gaskets are sale priced because there is a minor cosmetic flaw at one end of the gasket - SEE PHOTO - This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$46.25
SOR GRAPHITE MANIFOLD GASKET
Fits 1968-1974 F gas engine. This a clearance item - These gaskets are sale priced because there is a minor cosmetic flaw at one end of the gasket - SEE PHOTO - This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
(a Refundable Core Charge of 16.25 is already included in price)
Back to Top

Manifold Gaskets

Buy Quantity Part Number Description Price In Stock
Click for Zoom
Add to Cart 044-01B AFTERMARKET Manifold gasket
Fits 1968-1974 F gas engine
On Sale - Everyone gets the Discounted Price on this part.
(an Additional Handling Charge of 16.25 is already included in price)
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$39.75
AFTERMARKET Manifold gasket
Fits 1968-1974 F gas engine
On Sale - Everyone gets the Discounted Price on this part.
(a Refundable Core Charge of 16.25 is already included in price)
Add to Cart 044-01C Manifold gasket
Fits 1/75-8/87 2F gas engine
On Sale - Everyone gets the Discounted Price on this part.
(an Additional Handling Charge of 16.25 is already included in price)
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$57.99
Manifold gasket
Fits 1/75-8/87 2F gas engine
On Sale - Everyone gets the Discounted Price on this part.
(a Refundable Core Charge of 16.25 is already included in price)
Back to Top

SOR Kevlar Header Gasket

Graphite Heatriser Gasket

Buy Quantity Part Number Description Price In Stock
Click for Zoom
Add to Cart 044-08B-SOR Graphite heatriser gasket
Fits 1968-1974 F gas engine - Graphite gaskets are made from a unique thick graphite material that is about 1/8" thick and is designed to be squeezed during installation. This squeeze helps seal manifolds that are not perfectly flat. Resists leaks due to warping. This graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfgr suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$18.00
Graphite heatriser gasket
Fits 1968-1974 F gas engine - Graphite gaskets are made from a unique thick graphite material that is about 1/8" thick and is designed to be squeezed during installation. This squeeze helps seal manifolds that are not perfectly flat. Resists leaks due to warping. This graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfgr suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
Back to Top

Manifold Stud Kit

Buy Quantity Part Number Description Price In Stock
Click for Zoom
Add to Cart 044-02B-KIT Manifold stud kit
1968-1974 F gas engine - Kit has qty 6 manifold studs, qty 6 manifold nuts, and qty 6 manifold washers.
On Sale - Everyone gets the Discounted Price on this part.
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$29.90
Manifold stud kit
1968-1974 F gas engine - Kit has qty 6 manifold studs, qty 6 manifold nuts, and qty 6 manifold washers.
On Sale - Everyone gets the Discounted Price on this part.
Add to Cart 044-02XA-KIT Manifold Stud STEP–DOWN KIT
Fits 12mm diameter at one end and 10mm at the other, 37mm long. Comes with nut and washer for 10mm end. Set of 6. Designed for later head with earlier manifold set.
On Sale - Everyone gets the Discounted Price on this part.
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$71.88
Manifold Stud STEP–DOWN KIT
Fits 12mm diameter at one end and 10mm at the other, 37mm long. Comes with nut and washer for 10mm end. Set of 6. Designed for later head with earlier manifold set.
On Sale - Everyone gets the Discounted Price on this part.
Add to Cart 044-02XB-KIT MANIFOLD STUD STEP–UP KIT
Fits 12mm diameter at one end and 10mm at the other, 37mm long. Comes with nuts and washers for larger 12mm ends. Set of 6. Designed for early type head with later model manifolds.
On Sale - Everyone gets the Discounted Price on this part.
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$71.88
MANIFOLD STUD STEP–UP KIT
Fits 12mm diameter at one end and 10mm at the other, 37mm long. Comes with nuts and washers for larger 12mm ends. Set of 6. Designed for early type head with later model manifolds.
On Sale - Everyone gets the Discounted Price on this part.
Back to Top

Graphite Manifold Gaskets

SOR has developed a superior Graphite Manifold Gasket for your Land Cruiser engine. We believe that SOR's Graphite Manifold Gasket is the highest quality graphite type gasket you can get for your Land Cruiser. Our exclusive material has metal reinforcement embedded into the graphite matrix to make the material more durable than other manufacturer's graphite gaskets. SOR Graphite Manifold Gaskets are made from a unique thick graphite material that is about 1/8" thick and is designed to be squeezed during installation. This squeeze helps seal manifolds and headers that are not perfectly flat. Resists leaks due to warping. This graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Suggested fastener torque of 20-25 ft lb.

Buy Quantity Part Number Description Price In Stock
Click for Zoom
Add to Cart 044-01C-SOR SOR GRAPHITE MANIFOLD GASKET
Fits 1/75-8/87 2F gas engine. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
(an Additional Handling Charge of 16.25 is already included in price)
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$71.25
SOR GRAPHITE MANIFOLD GASKET
Fits 1/75-8/87 2F gas engine. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
(a Refundable Core Charge of 16.25 is already included in price)
Add to Cart 044-01C-PAIR PAIR SOR GRAPHITE MANIFOLD GASKET SET
Fits 1975-1987 2F gas engine. SAVE $$ when you buy 2 gaskets. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
(an Additional Handling Charge of 16.25 is already included in price)
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$96.25
PAIR SOR GRAPHITE MANIFOLD GASKET SET
Fits 1975-1987 2F gas engine. SAVE $$ when you buy 2 gaskets. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
(a Refundable Core Charge of 16.25 is already included in price)
Add to Cart 044-01CSORBLEM SOR GRAPHITE MANIFOLD GASKET
Fits 1/75-8/87 2F gas engine. This is a clearance item - These gaskets are sale priced because there is a minor cosmetic flaw at one end of the gasket - SEE PHOTO - This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$46.25
SOR GRAPHITE MANIFOLD GASKET
Fits 1/75-8/87 2F gas engine. This is a clearance item - These gaskets are sale priced because there is a minor cosmetic flaw at one end of the gasket - SEE PHOTO - This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
(a Refundable Core Charge of 16.25 is already included in price)
Back to Top

Manifold Gaskets

Buy Quantity Part Number Description Price In Stock
Click for Zoom
Add to Cart 044-01B AFTERMARKET Manifold gasket
Fits 1968-1974 F gas engine
On Sale - Everyone gets the Discounted Price on this part.
(an Additional Handling Charge of 16.25 is already included in price)
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$39.75
AFTERMARKET Manifold gasket
Fits 1968-1974 F gas engine
On Sale - Everyone gets the Discounted Price on this part.
(a Refundable Core Charge of 16.25 is already included in price)
Add to Cart 044-01C Manifold gasket
Fits 1/75-8/87 2F gas engine
On Sale - Everyone gets the Discounted Price on this part.
(an Additional Handling Charge of 16.25 is already included in price)
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$57.99
Manifold gasket
Fits 1/75-8/87 2F gas engine
On Sale - Everyone gets the Discounted Price on this part.
(a Refundable Core Charge of 16.25 is already included in price)
Back to Top

SOR Kevlar Header Gasket

Heat Riser Insulator & Gaskets

Buy Quantity Part Number Description Price In Stock
Click for Zoom
Add to Cart 044-12A Heat riser insulator
Fits 1/75-7/80 2F gas engine - Federal specification
On Sale - Everyone gets the Discounted Price on this part.
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$85.68
Heat riser insulator
Fits 1/75-7/80 2F gas engine - Federal specification
On Sale - Everyone gets the Discounted Price on this part.
Back to Top

Stainless Steel Heat Riser Insulator

Heat Riser Insulator
(click for large picture)

SOR now offers a replacement stainless steel heat riser for 1/75 to 8/87 intake and exhaust manifold assemblies. This insulator installs between the intake and exhaust manifold. This helps avoid overheating and possible cracking of the intake manifold, a common problem on 2F intake manifolds. This is an important consideration since most of these manifolds are no longer available. Since the insulator for the 1/76 to 7/80 California special is no longer available, we recommend using this insulator. Some heat riser flaps will need minor trimming to fit the Stainless Steel Insulator.

Buy Quantity Part Number Description Price In Stock
Click for Zoom
Add to Cart 044-12C Stainless steel heat riser insulator
Fits 1/75-8/87 2F gas engine manifold assemblies (updated part) NON-USA style - Only one gasket needed
On Sale - Everyone gets the Discounted Price on this part.
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$44.95
Stainless steel heat riser insulator
Fits 1/75-8/87 2F gas engine manifold assemblies (updated part) NON-USA style - Only one gasket needed
On Sale - Everyone gets the Discounted Price on this part.
Back to Top

Graphite Gaskets

(click for large picture)
Buy Quantity Part Number Description Price In Stock
Click for Zoom
Add to Cart 044-08C Heat riser gasket
Fits 1/75-7/80 2F gas engine - (2 required)
On Sale - Everyone gets the Discounted Price on this part.
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$19.10
Heat riser gasket
Fits 1/75-7/80 2F gas engine - (2 required)
On Sale - Everyone gets the Discounted Price on this part.
Add to Cart 044-08C-SOR Graphite heatriser gasket
Fits 1/75-7/87 - Requires insulator 044-12C for installation. Only one gasket required between insulator and exhaust manifold. Graphite gaskets are made from a unique thick graphite material that is about 1/8" thick and is designed to be squeezed during installation. This squeeze helps seal manifolds that are not perfectly flat. Resists leaks due to warping. This graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfgr suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$18.00
Graphite heatriser gasket
Fits 1/75-7/87 - Requires insulator 044-12C for installation. Only one gasket required between insulator and exhaust manifold. Graphite gaskets are made from a unique thick graphite material that is about 1/8" thick and is designed to be squeezed during installation. This squeeze helps seal manifolds that are not perfectly flat. Resists leaks due to warping. This graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfgr suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
Back to Top

Manifold Stud Kit

Buy Quantity Part Number Description Price In Stock
Click for Zoom
Add to Cart 044-02C-KIT Manifold stud kit
1/75-8/87 2F gas engine - Kit has qty 6 manifold studs, qty 6 manifold nuts, qty 6 manifold washers, and 2 end bolts.
On Sale - Everyone gets the Discounted Price on this part.
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$44.00
Manifold stud kit
1/75-8/87 2F gas engine - Kit has qty 6 manifold studs, qty 6 manifold nuts, qty 6 manifold washers, and 2 end bolts.
On Sale - Everyone gets the Discounted Price on this part.
Add to Cart 044-02XA-KIT Manifold Stud STEP–DOWN KIT
Fits 12mm diameter at one end and 10mm at the other, 37mm long. Comes with nut and washer for 10mm end. Set of 6. Designed for later head with earlier manifold set.
On Sale - Everyone gets the Discounted Price on this part.
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$71.88
Manifold Stud STEP–DOWN KIT
Fits 12mm diameter at one end and 10mm at the other, 37mm long. Comes with nut and washer for 10mm end. Set of 6. Designed for later head with earlier manifold set.
On Sale - Everyone gets the Discounted Price on this part.
Add to Cart 044-02XB-KIT MANIFOLD STUD STEP–UP KIT
Fits 12mm diameter at one end and 10mm at the other, 37mm long. Comes with nuts and washers for larger 12mm ends. Set of 6. Designed for early type head with later model manifolds.
On Sale - Everyone gets the Discounted Price on this part.
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$71.88
MANIFOLD STUD STEP–UP KIT
Fits 12mm diameter at one end and 10mm at the other, 37mm long. Comes with nuts and washers for larger 12mm ends. Set of 6. Designed for early type head with later model manifolds.
On Sale - Everyone gets the Discounted Price on this part.
Back to Top

Graphite Manifold Gaskets

SOR has developed a superior Graphite Manifold Gasket for your Land Cruiser engine. We believe that SOR's Graphite Manifold Gasket is the highest quality graphite type gasket you can get for your Land Cruiser. Our exclusive material has metal reinforcement embedded into the graphite matrix to make the material more durable than other manufacturer's graphite gaskets. SOR Graphite Manifold Gaskets are made from a unique thick graphite material that is about 1/8" thick and is designed to be squeezed during installation. This squeeze helps seal manifolds and headers that are not perfectly flat. Resists leaks due to warping. This graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Suggested fastener torque of 20-25 ft lb.

Buy Quantity Part Number Description Price In Stock
Click for Zoom
Add to Cart 044-01C-SOR SOR GRAPHITE MANIFOLD GASKET
Fits 1/75-8/87 2F gas engine. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
(an Additional Handling Charge of 16.25 is already included in price)
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$71.25
SOR GRAPHITE MANIFOLD GASKET
Fits 1/75-8/87 2F gas engine. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
(a Refundable Core Charge of 16.25 is already included in price)
Add to Cart 044-01C-PAIR PAIR SOR GRAPHITE MANIFOLD GASKET SET
Fits 1975-1987 2F gas engine. SAVE $$ when you buy 2 gaskets. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
(an Additional Handling Charge of 16.25 is already included in price)
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$96.25
PAIR SOR GRAPHITE MANIFOLD GASKET SET
Fits 1975-1987 2F gas engine. SAVE $$ when you buy 2 gaskets. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
(a Refundable Core Charge of 16.25 is already included in price)
Back to Top

Manifold Gaskets

Buy Quantity Part Number Description Price In Stock
Click for Zoom
Add to Cart 044-01B AFTERMARKET Manifold gasket
Fits 1968-1974 F gas engine
On Sale - Everyone gets the Discounted Price on this part.
(an Additional Handling Charge of 16.25 is already included in price)
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$39.75
AFTERMARKET Manifold gasket
Fits 1968-1974 F gas engine
On Sale - Everyone gets the Discounted Price on this part.
(a Refundable Core Charge of 16.25 is already included in price)
Add to Cart 044-01C Manifold gasket
Fits 1/75-8/87 2F gas engine
On Sale - Everyone gets the Discounted Price on this part.
(an Additional Handling Charge of 16.25 is already included in price)
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$57.99
Manifold gasket
Fits 1/75-8/87 2F gas engine
On Sale - Everyone gets the Discounted Price on this part.
(a Refundable Core Charge of 16.25 is already included in price)
Back to Top

SOR Kevlar Header Gasket

Heat Riser Insulator & Gaskets

Buy Quantity Part Number Description Price In Stock
Click for Zoom
Add to Cart 044-12A Heat riser insulator
Fits 1/75-7/80 2F gas engine - Federal specification
On Sale - Everyone gets the Discounted Price on this part.
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$85.68
Heat riser insulator
Fits 1/75-7/80 2F gas engine - Federal specification
On Sale - Everyone gets the Discounted Price on this part.
Back to Top

Stainless Steel Heat Riser Insulator

(click for large picture)

SOR now offers a replacement stainless steel heat riser for 1/75 to 8/87 intake and exhaust manifold assemblies. This insulator installs between the intake and exhaust manifold. This helps avoid overheating and possible cracking of the intake manifold, a common problem on 2F intake manifolds. This is an important consideration since most of these manifolds are no longer available. Since the insulator for the 1/76 to 7/80 California special is no longer available, we recommend using this insulator. Some heat riser flaps will need minor trimming to fit the Stainless Steel Insulator.

Buy Quantity Part Number Description Price In Stock
Click for Zoom
Add to Cart 044-12C Stainless steel heat riser insulator
Fits 1/75-8/87 2F gas engine manifold assemblies (updated part) NON-USA style - Only one gasket needed
On Sale - Everyone gets the Discounted Price on this part.
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$44.95
Stainless steel heat riser insulator
Fits 1/75-8/87 2F gas engine manifold assemblies (updated part) NON-USA style - Only one gasket needed
On Sale - Everyone gets the Discounted Price on this part.
Back to Top

Heat Riser Gaskets

(click for large picture)
Buy Quantity Part Number Description Price In Stock
Click for Zoom
Add to Cart 044-08C Heat riser gasket
Fits 1/75-7/80 2F gas engine - (2 required)
On Sale - Everyone gets the Discounted Price on this part.
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$19.10
Heat riser gasket
Fits 1/75-7/80 2F gas engine - (2 required)
On Sale - Everyone gets the Discounted Price on this part.
Add to Cart 044-08C-SOR Graphite heatriser gasket
Fits 1/75-7/87 - Requires insulator 044-12C for installation. Only one gasket required between insulator and exhaust manifold. Graphite gaskets are made from a unique thick graphite material that is about 1/8" thick and is designed to be squeezed during installation. This squeeze helps seal manifolds that are not perfectly flat. Resists leaks due to warping. This graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfgr suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$18.00
Graphite heatriser gasket
Fits 1/75-7/87 - Requires insulator 044-12C for installation. Only one gasket required between insulator and exhaust manifold. Graphite gaskets are made from a unique thick graphite material that is about 1/8" thick and is designed to be squeezed during installation. This squeeze helps seal manifolds that are not perfectly flat. Resists leaks due to warping. This graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfgr suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
Back to Top

Manifold Stud Kit

Buy Quantity Part Number Description Price In Stock
Click for Zoom
Add to Cart 044-02C-KIT Manifold stud kit
1/75-8/87 2F gas engine - Kit has qty 6 manifold studs, qty 6 manifold nuts, qty 6 manifold washers, and 2 end bolts.
On Sale - Everyone gets the Discounted Price on this part.
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$44.00
Manifold stud kit
1/75-8/87 2F gas engine - Kit has qty 6 manifold studs, qty 6 manifold nuts, qty 6 manifold washers, and 2 end bolts.
On Sale - Everyone gets the Discounted Price on this part.
Add to Cart 044-02XA-KIT Manifold Stud STEP–DOWN KIT
Fits 12mm diameter at one end and 10mm at the other, 37mm long. Comes with nut and washer for 10mm end. Set of 6. Designed for later head with earlier manifold set.
On Sale - Everyone gets the Discounted Price on this part.
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$71.88
Manifold Stud STEP–DOWN KIT
Fits 12mm diameter at one end and 10mm at the other, 37mm long. Comes with nut and washer for 10mm end. Set of 6. Designed for later head with earlier manifold set.
On Sale - Everyone gets the Discounted Price on this part.
Add to Cart 044-02XB-KIT MANIFOLD STUD STEP–UP KIT
Fits 12mm diameter at one end and 10mm at the other, 37mm long. Comes with nuts and washers for larger 12mm ends. Set of 6. Designed for early type head with later model manifolds.
On Sale - Everyone gets the Discounted Price on this part.
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$71.88
MANIFOLD STUD STEP–UP KIT
Fits 12mm diameter at one end and 10mm at the other, 37mm long. Comes with nuts and washers for larger 12mm ends. Set of 6. Designed for early type head with later model manifolds.
On Sale - Everyone gets the Discounted Price on this part.
Back to Top

Graphite Manifold Gaskets

SOR has developed a superior Graphite Manifold Gasket for your Land Cruiser engine. We believe that SOR's Graphite Manifold Gasket is the highest quality graphite type gasket you can get for your Land Cruiser. Our exclusive material has metal reinforcement embedded into the graphite matrix to make the material more durable than other manufacturer's graphite gaskets. SOR Graphite Manifold Gaskets are made from a unique thick graphite material that is about 1/8" thick and is designed to be squeezed during installation. This squeeze helps seal manifolds and headers that are not perfectly flat. Resists leaks due to warping. This graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Suggested fastener torque of 20-25 ft lb.

Buy Quantity Part Number Description Price In Stock
Click for Zoom
Add to Cart 044-01C-SOR SOR GRAPHITE MANIFOLD GASKET
Fits 1/75-8/87 2F gas engine. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
(an Additional Handling Charge of 16.25 is already included in price)
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$71.25
SOR GRAPHITE MANIFOLD GASKET
Fits 1/75-8/87 2F gas engine. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
(a Refundable Core Charge of 16.25 is already included in price)
Add to Cart 044-01C-PAIR PAIR SOR GRAPHITE MANIFOLD GASKET SET
Fits 1975-1987 2F gas engine. SAVE $$ when you buy 2 gaskets. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
(an Additional Handling Charge of 16.25 is already included in price)
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$96.25
PAIR SOR GRAPHITE MANIFOLD GASKET SET
Fits 1975-1987 2F gas engine. SAVE $$ when you buy 2 gaskets. This is a compressed graphite material with a stainless steel core. This unique gasket is about 1/8 inch thick and is designed to be compressed during installation. This compression helps seal manifolds that are not perfectly flat. Resists leaks due to warping. The stainless steel core resists blowing out. The graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfg suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
(a Refundable Core Charge of 16.25 is already included in price)
Back to Top

Manifold Gaskets

Buy Quantity Part Number Description Price In Stock
Click for Zoom
Add to Cart 044-01B AFTERMARKET Manifold gasket
Fits 1968-1974 F gas engine
On Sale - Everyone gets the Discounted Price on this part.
(an Additional Handling Charge of 16.25 is already included in price)
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$39.75
AFTERMARKET Manifold gasket
Fits 1968-1974 F gas engine
On Sale - Everyone gets the Discounted Price on this part.
(a Refundable Core Charge of 16.25 is already included in price)
Add to Cart 044-01C Manifold gasket
Fits 1/75-8/87 2F gas engine
On Sale - Everyone gets the Discounted Price on this part.
(an Additional Handling Charge of 16.25 is already included in price)
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$57.99
Manifold gasket
Fits 1/75-8/87 2F gas engine
On Sale - Everyone gets the Discounted Price on this part.
(a Refundable Core Charge of 16.25 is already included in price)
Back to Top

SOR Kevlar Header Gasket

Heat Riser Insulator & Gaskets

Buy Quantity Part Number Description Price In Stock
Click for Zoom
Add to Cart 044-12A Heat riser insulator
Fits 1/75-7/80 2F gas engine - Federal specification
On Sale - Everyone gets the Discounted Price on this part.
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$85.68
Heat riser insulator
Fits 1/75-7/80 2F gas engine - Federal specification
On Sale - Everyone gets the Discounted Price on this part.
Add to Cart 044-12D Heat riser insulator
Fits 8/80-8/87 2F gas engine
On Sale - Everyone gets the Discounted Price on this part.
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$85.68
Heat riser insulator
Fits 8/80-8/87 2F gas engine
On Sale - Everyone gets the Discounted Price on this part.
Back to Top

Stainless Steel Heat Riser Insulator

Stainless Steel Heat Riser Insulator
(click for large picture)

SOR now offers a replacement stainless steel heat riser for 1/75 to 8/87 intake and exhaust manifold assemblies. This insulator installs between the intake and exhaust manifold. This helps avoid overheating and possible cracking of the intake manifold, a common problem on 2F intake manifolds. This is an important consideration since most of these manifolds are no longer available. Since the insulator for the 1/76 to 7/80 California special is no longer available, we recommend using this insulator. Some heat riser flaps will need minor trimming to fit the Stainless Steel Insulator.

Buy Quantity Part Number Description Price In Stock
Click for Zoom
Add to Cart 044-12C Stainless steel heat riser insulator
Fits 1/75-8/87 2F gas engine manifold assemblies (updated part) NON-USA style - Only one gasket needed
On Sale - Everyone gets the Discounted Price on this part.
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$44.95
Stainless steel heat riser insulator
Fits 1/75-8/87 2F gas engine manifold assemblies (updated part) NON-USA style - Only one gasket needed
On Sale - Everyone gets the Discounted Price on this part.
Back to Top

Heat Riser Gaskets

(click for large picture)
Buy Quantity Part Number Description Price In Stock
Click for Zoom
Add to Cart 044-08C Heat riser gasket
Fits 1/75-7/80 2F gas engine - (2 required)
On Sale - Everyone gets the Discounted Price on this part.
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$19.10
Heat riser gasket
Fits 1/75-7/80 2F gas engine - (2 required)
On Sale - Everyone gets the Discounted Price on this part.
Add to Cart 044-08C-SOR Graphite heatriser gasket
Fits 1/75-7/87 - Requires insulator 044-12C for installation. Only one gasket required between insulator and exhaust manifold. Graphite gaskets are made from a unique thick graphite material that is about 1/8" thick and is designed to be squeezed during installation. This squeeze helps seal manifolds that are not perfectly flat. Resists leaks due to warping. This graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfgr suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$18.00
Graphite heatriser gasket
Fits 1/75-7/87 - Requires insulator 044-12C for installation. Only one gasket required between insulator and exhaust manifold. Graphite gaskets are made from a unique thick graphite material that is about 1/8" thick and is designed to be squeezed during installation. This squeeze helps seal manifolds that are not perfectly flat. Resists leaks due to warping. This graphite material is rated for temperatures in the 2000 degree range so the material will not deteriorate due to exhaust heat. Mfgr suggested fastener torque of 20-25 ft lb.
On Sale - Everyone gets the Discounted Price on this part.
Back to Top

Manifold Stud Kit

Buy Quantity Part Number Description Price In Stock
Click for Zoom
Add to Cart 044-02C-KIT Manifold stud kit
1/75-8/87 2F gas engine - Kit has qty 6 manifold studs, qty 6 manifold nuts, qty 6 manifold washers, and 2 end bolts.
On Sale - Everyone gets the Discounted Price on this part.
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$44.00
Manifold stud kit
1/75-8/87 2F gas engine - Kit has qty 6 manifold studs, qty 6 manifold nuts, qty 6 manifold washers, and 2 end bolts.
On Sale - Everyone gets the Discounted Price on this part.
Add to Cart 044-02XA-KIT Manifold Stud STEP–DOWN KIT
Fits 12mm diameter at one end and 10mm at the other, 37mm long. Comes with nut and washer for 10mm end. Set of 6. Designed for later head with earlier manifold set.
On Sale - Everyone gets the Discounted Price on this part.
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$71.88
Manifold Stud STEP–DOWN KIT
Fits 12mm diameter at one end and 10mm at the other, 37mm long. Comes with nut and washer for 10mm end. Set of 6. Designed for later head with earlier manifold set.
On Sale - Everyone gets the Discounted Price on this part.
Add to Cart 044-02XB-KIT MANIFOLD STUD STEP–UP KIT
Fits 12mm diameter at one end and 10mm at the other, 37mm long. Comes with nuts and washers for larger 12mm ends. Set of 6. Designed for early type head with later model manifolds.
On Sale - Everyone gets the Discounted Price on this part.
Prop 65 Caution WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov
$71.88
MANIFOLD STUD STEP–UP KIT
Fits 12mm diameter at one end and 10mm at the other, 37mm long. Comes with nuts and washers for larger 12mm ends. Set of 6. Designed for early type head with later model manifolds.
On Sale - Everyone gets the Discounted Price on this part.
Back to Top
Service Tip: Manifold Gasket Replacement

When replacing the manifold gasket it is recommended that you place a straight edge against the manifolds to see if they are in alignment. Misaligned manifolds need to be resurfaced in order to work properly. You should also use anti-seize on all nuts, bolts and studs upon reassembly. All gaskets associated with the intake and exhaust manifold should go on dry-NO GASKET COMPOUND IS REQUIRED or RECOMMENDED. Check the factory engine manuals for proper torque amounts and sequences.


This website uses JavaScript and Cookies to process your orders. Specter Off-Road, Inc. (sor.com) does not use cookies to track, sell, trade or otherwise distribute your personal information. If you choose to disable these browser enhancements, your shopping cart will not function properly. If you prefer, give us a call, we are always happy to assist you with your order by phone during normal business hours at (818) 882-1238. Click here to read our policy including how we use cookies. By continuing to use this web site, you agree to our policy.
X