Roll Cage Kit & Accessories
Cage Kits & Accessories (Page 245)
SOR Family Cage Assembly
Cage Assmebly and assembly with SOR Pad Kit
(click for large picture) Specter is proud to offer a full length cage for your 40 Series Land Cruiser. Shown here in the picture is a combination of three different part numbers, SOR Sport Bar (#244-80), SOR Front Cage Kit (#245-80), and the SOR Rear Family Cage Kit (#245-86). All these cage components are made from 2 inch diameter .120 wall tubing and come finished in black powder coat for corrosion protection. All these parts are UPS shippable. Tubes may require trimming to length. Drilling and welding required for installation. Remember to test fit cage components prior to final installation. 
(click for large picture)
 UPS Shippable #244-80 SOR Sportbar The FJ40 Sportbar is designed with the ability to be UPS shippable. It comes in four pre-cut pieces ready to be welded into your FJ40. Hardware is included. Shipping weight 55 lbs. Welding, drilling and tube trimming required. Roll bar parts come black powder coated for corrosion protection. Powder coat must be removed from areas you plan to weld. Remember to test fit cage components prior to final installation. 1974-1984 does not use stock mounting holes. Made from 2 inch diameter .120 wall tubing. 
Click for...
SOR Padding Kits,Padding Covers, Bulk Padding, Tape & other accessories #245-80 SOR Front Cage Kit This Front Cage Kit is designed with the ability to be UPS shippable. It comes in five pre-cut pieces ready to be welded into your FJ40. Front Cage Kit comes black powder coated for corrosion protection. Powder coat must be removed from areas you plan to weld. All hardware is included. Welding, drilling and tube trimming is required. Remember to test fit cage components prior to final installation. Shipping weight is 55 lbs. Made from 2 inch diameter .120 wall tubing. #245-86 SOR Rear Family Cage Kit Specter now offers a kit to extend the full height roll bar to the rear of your 40 Series. This UPS shippable kit contains four pre-cut pieces ready to be welded together. Rear hoop is specially designed to fit inside hard tops. Comes with two spreader bars, mounting plates and mounting hardware. Requires drilling and welding to install. Roll bar parts come black powder coated for corrosion protection. Powder coat must be removed from areas you plan to weld. Remember to test fit cage components prior to final installation. Shipping weight is 55 lbs. Made from 2 inch diameter .120 wall tubing. #245-81 SOR Front Cage Pad Kit & #245-87 SOR Rear Cage Pad Kit Specter makes padding kits for SOR's Cage Kit! This is truly the best fitting padding kit on the market today. The pads fit like a glove, they are tailored for a nice fit over the curves of your SOR bars. Kits come complete with enough padding and a full set of pad covers to cover the entire bar. Made of durable Tuff Duck vinyl material. These kits are designed to fit a roll bar and cage kit installed in such a fashion as to fit under the original hard top. Available in Tuff Duck material in Black vinyl (BL), Gray vinyl (GY), Tan vinyl (TN), and Olive Drab vinyl (OD). |
| Buy | Quantity | Part Number | Description | Price | In Stock | Click for Zoom |
|---|---|---|---|---|---|---|
| Add to Cart | 244-80 |
SOR 40 Series Sportbar Fits 40 Series 1958-1984(1975-1984 does NOT use stock mounting holes) - 4 pre-cut pieces - Welding, drilling, and tube trimming required - Comes with installation hardware - Remember to test fit cage components prior to final installation - UPSable - Shipping weight = 55 lbs. (approximate) If you have factory rear jump seats, please see seat bracket kits #246-10 for installation, order separately if needed. (Discontinued - Not available at this time) (an Additional Handling Charge of 0.00 is already included in price)  WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
$0.00 |
|
||
|
SOR 40 Series Sportbar Fits 40 Series 1958-1984(1975-1984 does NOT use stock mounting holes) - 4 pre-cut pieces - Welding, drilling, and tube trimming required - Comes with installation hardware - Remember to test fit cage components prior to final installation - UPSable - Shipping weight = 55 lbs. (approximate) If you have factory rear jump seats, please see seat bracket kits #246-10 for installation, order separately if needed. (Discontinued - Not available at this time) (an Additional Handling Charge of 0.00 is already included in price) WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
||||||
| Add to Cart | 245-80 |
SOR Front 40 Series Cage Kit Fits 1958-1984 FJ40 - 5 pre-cut pieces - Welding, drilling, and tube trimming required - Comes with installation hardware - Remember to test fit cage components prior to final installation - UPSable - Shipping weight = 55 lbs. (approximate) (Discontinued - Not available at this time) (an Additional Handling Charge of 0.00 is already included in price) WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
$0.00 |
|
||
|
SOR Front 40 Series Cage Kit Fits 1958-1984 FJ40 - 5 pre-cut pieces - Welding, drilling, and tube trimming required - Comes with installation hardware - Remember to test fit cage components prior to final installation - UPSable - Shipping weight = 55 lbs. (approximate) (Discontinued - Not available at this time) (an Additional Handling Charge of 0.00 is already included in price) WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
||||||
| Add to Cart | 245-86 |
SOR Rear Family Cage Kit Fits 40 Series - 4 pre-cut pieces - Welding and drilling required - Comes with installation hardware - Remember to test fit cage components prior to final installation - UPSable - Shipping weight = 55 lbs. (approximate) (Discontinued - Not available at this time) (an Additional Handling Charge of 0.00 is already included in price) WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
$0.00 |
|
||
|
SOR Rear Family Cage Kit Fits 40 Series - 4 pre-cut pieces - Welding and drilling required - Comes with installation hardware - Remember to test fit cage components prior to final installation - UPSable - Shipping weight = 55 lbs. (approximate) (Discontinued - Not available at this time) (an Additional Handling Charge of 0.00 is already included in price) WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
||||||
Sportbar Hardware
| Buy | Quantity | Part Number | Description | Price | In Stock | Click for Zoom |
|---|---|---|---|---|---|---|
| Add to Cart | 244-81-HW |
Sportbar Hardware Kit Fits #244-80 40 Series Sports Bar - Replacement hardware. Club Price with 15% Discount is $17.72 Click here for info about joining Club SOR WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
$20.85 |
|
||
|
Sportbar Hardware Kit Fits #244-80 40 Series Sports Bar - Replacement hardware. Club Price with 15% Discount is $17.72 Click here for info about joining Club SOR WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
||||||
Front Cage Kit Hardware
| Buy | Quantity | Part Number | Description | Price | In Stock | Click for Zoom |
|---|---|---|---|---|---|---|
| Add to Cart | 245-80-HW |
Front Cage Hardware Kit Fits #245-80 40 Series Front Cage Kit - Replacement hardware. Club Price with 15% Discount is $10.2 Click here for info about joining Club SOR WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
$12.00 |
|
||
|
Front Cage Hardware Kit Fits #245-80 40 Series Front Cage Kit - Replacement hardware. Club Price with 15% Discount is $10.20 Click here for info about joining Club SOR WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
||||||
Family Cage Kit Hardware
| Buy | Quantity | Part Number | Description | Price | In Stock | Click for Zoom |
|---|---|---|---|---|---|---|
| Add to Cart | 245-86-HW |
Family Cage Hardware Kit Fits #245-86 40 Series Family Cage Kit - Replacement hardware. Club Price with 15% Discount is $10.2 Click here for info about joining Club SOR WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
$12.00 |
|
||
|
Family Cage Hardware Kit Fits #245-86 40 Series Family Cage Kit - Replacement hardware. Club Price with 15% Discount is $10.20 Click here for info about joining Club SOR WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
||||||
SOR Front 40 Series Cage Kit
(click for large picture) This Front Cage Kit is designed with the ability to be UPS shippable. It comes in five pre-cut pieces ready to be welded into your FJ40. All hardware is included. Welding, drilling and tube trimming is required. Remember to test fit cage components prior to final installation. Shipping weight is 55 lbs. Made from 2 inch diameter .120 wall tubing. Comes black powder coated for corrosion protection. 
UPS Shippable |
| Buy | Quantity | Part Number | Description | Price | In Stock | Click for Zoom |
|---|---|---|---|---|---|---|
| Add to Cart | 245-80 |
SOR Front 40 Series Cage Kit Fits 1958-1984 FJ40 - 5 pre-cut pieces - Welding, drilling, and tube trimming required - Comes with installation hardware - Remember to test fit cage components prior to final installation - UPSable - Shipping weight = 55 lbs. (approximate) (Discontinued - Not available at this time) (an Additional Handling Charge of 0.00 is already included in price) WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
$0.00 |
|
||
|
SOR Front 40 Series Cage Kit Fits 1958-1984 FJ40 - 5 pre-cut pieces - Welding, drilling, and tube trimming required - Comes with installation hardware - Remember to test fit cage components prior to final installation - UPSable - Shipping weight = 55 lbs. (approximate) (Discontinued - Not available at this time) (an Additional Handling Charge of 0.00 is already included in price) WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
||||||
| Add to Cart | 245-80-HW |
Front Cage Hardware Kit Fits #245-80 40 Series Front Cage Kit - Replacement hardware. Club Price with 15% Discount is $10.2 Click here for info about joining Club SOR WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
$12.00 |
|
||
|
Front Cage Hardware Kit Fits #245-80 40 Series Front Cage Kit - Replacement hardware. Club Price with 15% Discount is $10.20 Click here for info about joining Club SOR WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
||||||
SOR Front Cage Pad Kit
(click for large picture)
Specter makes padding kits for SOR's Front Cage Kit! This is truly the best fitting padding kit on the market today. The pads fit like a glove, they are tailored for a nice fit over the curves of your SOR bars. Kits come complete with enough padding and a full set of pad covers to cover the entire bar. Made of durable Tuff Duck vinyl material. These kits are designed to fit a roll bar and cage kit installed in such a fashion as to fit under the original hardtop. Due to the variety of roll bar installations, trimming and fitting is required at bar intersections. See instruction PDF. Specter has a full line of new Tuff Duck accessories to out fit your Cruiser, for more info see page 309 for Tuff Duck Slip Covers, page 272 for SummerTops®, page 276 for Tuff Duck grab bar pads and shift lever pads, page 254 for Tuff Duck Tire covers. |
| Buy | Quantity | Part Number | Description | Price | In Stock | Click for Zoom |
|---|---|---|---|---|---|---|
| Add to Cart | 245-81-TBL |
SOR Front Cage Pad kit-Black Tuff Duck Vinyl Fits 1958-1984 FJ40 and BJ40 SOR Front Cage kit - Comes with Tube Bar padding and a full set of SOR Tube Bar pad covers to cover the entire bar On Sale - Everyone gets the Discounted Price on this part. WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
$230.00 |
|
||
|
SOR Front Cage Pad kit-Black Tuff Duck Vinyl Fits 1958-1984 FJ40 and BJ40 SOR Front Cage kit - Comes with Tube Bar padding and a full set of SOR Tube Bar pad covers to cover the entire bar On Sale - Everyone gets the Discounted Price on this part. WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
||||||
| Add to Cart | 245-81-TGY |
SOR Front Cage Pad kit-Gray Tuff Duck Vinyl Fits 1958-1984 FJ40 and BJ40 SOR Front Cage kit - Comes with Tube Bar padding and a full set of SOR Tube Bar pad covers to cover the entire bar On Sale - Everyone gets the Discounted Price on this part. WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
$230.00 |
|
||
|
SOR Front Cage Pad kit-Gray Tuff Duck Vinyl Fits 1958-1984 FJ40 and BJ40 SOR Front Cage kit - Comes with Tube Bar padding and a full set of SOR Tube Bar pad covers to cover the entire bar On Sale - Everyone gets the Discounted Price on this part. WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
||||||
| Add to Cart | 245-81-TOD |
SOR Front Cage Pad kit-Olive Drab Tuff Duck Vinyl Fits 1958-1984 FJ40 and BJ40 SOR Front Cage kit - Comes with Tube Bar padding and a full set of SOR Tube Bar pad covers to cover the entire bar On Sale - Everyone gets the Discounted Price on this part. WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
$230.00 |
|
||
|
SOR Front Cage Pad kit-Olive Drab Tuff Duck Vinyl Fits 1958-1984 FJ40 and BJ40 SOR Front Cage kit - Comes with Tube Bar padding and a full set of SOR Tube Bar pad covers to cover the entire bar On Sale - Everyone gets the Discounted Price on this part. WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
||||||
| Add to Cart | 245-81-TTN |
SOR Front Cage Pad kit-Tan Tuff Duck Vinyl Fits 1958-1984 FJ40 and BJ40 SOR Front Cage kit - Comes with Tube Bar padding and a full set of SOR Tube Bar pad covers to cover the entire bar On Sale - Everyone gets the Discounted Price on this part. WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
$230.00 |
|
||
|
SOR Front Cage Pad kit-Tan Tuff Duck Vinyl Fits 1958-1984 FJ40 and BJ40 SOR Front Cage kit - Comes with Tube Bar padding and a full set of SOR Tube Bar pad covers to cover the entire bar On Sale - Everyone gets the Discounted Price on this part. WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
||||||
Spreader Bar
Spreader Bar is 40 inches long with one mitered end. |
| Buy | Quantity | Part Number | Description | Price | In Stock | Click for Zoom |
|---|---|---|---|---|---|---|
| Add to Cart | 245-85 |
Spreader Bar 40 inches long with one mitered end (Discontinued - Not available at this time) WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
$0.00 |
|
||
|
Spreader Bar 40 inches long with one mitered end (Discontinued - Not available at this time) WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
||||||
SOR 40 Series Rear Family Cage Kit
(click for large picture)
Specter now offers a kit to extend the full height roll bar to the rear of your 40 Series. This UPS shippable kit contains four pre-cut pieces ready to be welded together. Rear hoop is specially designed to fit inside softops. Comes with two spreader bars, mounting plates and mounting hardware. Requires drilling and welding to install. Remember to test fit cage components prior to final installation. Shipping weight is 55 lbs. Made from 2 inch diameter .120 wall tubing. Comes black powder coated for corrosion protection. UPS Shippable |
| Buy | Quantity | Part Number | Description | Price | In Stock | Click for Zoom |
|---|---|---|---|---|---|---|
| Add to Cart | 245-86 |
SOR Rear Family Cage Kit Fits 40 Series - 4 pre-cut pieces - Welding and drilling required - Comes with installation hardware - Remember to test fit cage components prior to final installation - UPSable - Shipping weight = 55 lbs. (approximate) (Discontinued - Not available at this time) (an Additional Handling Charge of 0.00 is already included in price) WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
$0.00 |
|
||
|
SOR Rear Family Cage Kit Fits 40 Series - 4 pre-cut pieces - Welding and drilling required - Comes with installation hardware - Remember to test fit cage components prior to final installation - UPSable - Shipping weight = 55 lbs. (approximate) (Discontinued - Not available at this time) (an Additional Handling Charge of 0.00 is already included in price) WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
||||||
Family Cage Hardware Kit
| Buy | Quantity | Part Number | Description | Price | In Stock | Click for Zoom |
|---|---|---|---|---|---|---|
| Add to Cart | 245-86-HW |
Family Cage Hardware Kit Fits #245-86 40 Series Family Cage Kit - Replacement hardware. Club Price with 15% Discount is $10.2 Click here for info about joining Club SOR WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
$12.00 |
|
||
|
Family Cage Hardware Kit Fits #245-86 40 Series Family Cage Kit - Replacement hardware. Club Price with 15% Discount is $10.20 Click here for info about joining Club SOR WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
||||||
SOR Rear Cage Pad Kit
(click for large picture)
Specter makes padding kits for SOR's Rear Cage Kit! This is truly the best fitting padding kit on the market today. The pads fit like a glove, they are tailored for a nice fit over the curves of your SOR bars. Kits come complete with enough padding and a full set of pad covers to cover the entire bar. Made of durable Tuff Duck vinyl material. These kits are designed to fit a roll bar and cage kit installed in such a fashion as to fit under the original hardtop. Due to the variety of roll bar installations, trimming and fitting is required at bar intersections. See instruction PDF. Available in Tuff Duck material in Black vinyl (BL), Gray vinyl (GY), Tan vinyl (TN), and Olive Drab vinyl (OD). Specter has a full line of new Tuff Duck accessories to out fit your Cruiser, for more info see page 309 for Tuff Duck Slip Covers, page 272 for SummerTops®, page 276 for Tuff Duck grab bar pads and shift lever pads, page 254 for Tuff Duck Tire covers. |
| Buy | Quantity | Part Number | Description | Price | In Stock | Click for Zoom |
|---|---|---|---|---|---|---|
| Add to Cart | 245-87-TGY |
SOR Rear Cage Pad kit-Gray Tuff Duck vinyl Fits 1958-1984 FJ40 and BJ40 SOR Rear Cage kit - Comes with Tube Bar padding and a full set of SOR Tube Bar pad covers to cover the entire bar On Sale - Everyone gets the Discounted Price on this part. WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
$230.00 |
|
||
|
SOR Rear Cage Pad kit-Gray Tuff Duck vinyl Fits 1958-1984 FJ40 and BJ40 SOR Rear Cage kit - Comes with Tube Bar padding and a full set of SOR Tube Bar pad covers to cover the entire bar On Sale - Everyone gets the Discounted Price on this part. WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
||||||
| Add to Cart | 245-87-TOD |
SOR Rear Cage Pad kit-Olive Drab Tuff Duck vinyl Fits 1958-1984 FJ40 and BJ40 SOR Rear Cage kit - Comes with Tube Bar padding and a full set of SOR Tube Bar pad covers to cover the entire bar On Sale - Everyone gets the Discounted Price on this part. WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
$230.00 |
|
||
|
SOR Rear Cage Pad kit-Olive Drab Tuff Duck vinyl Fits 1958-1984 FJ40 and BJ40 SOR Rear Cage kit - Comes with Tube Bar padding and a full set of SOR Tube Bar pad covers to cover the entire bar On Sale - Everyone gets the Discounted Price on this part. WARNING: Cancer and Reproductive Harm — www.p65warnings.ca.gov |
||||||
